Digital Intelligence FireChief Operation & User’s Manual
Text of Digital Intelligence FireChief Operation & User’s Manual
FireChief™ User Manual 3
N O T I C E
No part of this manual, including the products and software described in it, may
be reproduced, transmitted, transcribed, stored in a retrieval system, or trans-
lated into any language in any form or by any means, except documentation
kept by the purchaser for backup purposes, without the express written permis-
sion of Digital Intelligence, Inc. (“DI”).
DI PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF A
©2005 Digital Intelligence, Inc.
LIMITED WARRANTY
Digital Intelligence, Inc. (“DI”) warrants to the original end-user that the product (excluding
accessories) will be free from defects in materials and/or workmanship for a period of one
(1) year from the date of shipment. This limited warranty is non-transferable, and is issued
only to you, the first end user purchaser.
Exclusions
This warranty does not apply to: (i) DI software products; (ii) expen
FireChief™ User Manual 5
TABLE OF CONTENTS
What is the FireChief........................................................................... 1
Power Considerations ......................................................................... 2
FireChief Cabling to PC ...................................................................... 2
Drive Configuration ............................................................................. 3
Diagnostic LED’s
FireChief™ User Manual 7
Package Contents
The following is included with the FireChief:
•
FireChief 800 (1)
•
Power cord (1)
•
FireWire Cable (9-pin to 9-pin) (1)
•
FireWire Adapter (9-pin to 6-pin) (1)
•
FireWire Adapter (9-pin to 4-pin) (1)
•
SATA Drive Tray (2)
•
User Guide (1)
What is the FireChief
FireChief is a dual bay FireWire to IDE/SATA enclosure with a drive bay that is
hardware write protected (ReadOnly) and a drive bay tha
©2005 Digital Intelligence, Inc. Drive Configuration
Before connecting an IDE disk drive to the FireChief, the drive must be
configured (jumpered) as a Single Master Device. Both hard drives must be
configured (jumpered) as a Master IDE Device. Certain models of IDE hard
drives (Western Digital) may specifically require the device to be configured as
a “Master Device in a Single Drive Configuration” (no Slave device present on
IDE Channel).
Diagnos