Epson PowerLite 420 Installation Manual
Text of the manual
For your safety, read all the instructions in this guide before using the wall mount. Incorrect handling that
ignores instructions in this guide could damage the wall mount or could result in personal injury or property
damage. Keep this installation guide on hand for future reference.
Read the safety instructions in the User's Guide fo
The installation work should be performed by at least two qualified service personnel. If you need to
loosen any screws during installation, be careful not to drop the wall mount.
If the wall mount or projector falls, it could cause personal injury or property damage.
When you mount the projector on the wall with the wall mount, the wall requires e
Determine where you will install the wall mount and prepare the location in advance. Also, make sure
there is a gap of 16 to 26 inches (410 to 660 mm) from the top of the image projected onto the white
board to the ceiling. See “Positioning the Projector” on page 10 for more details.
•
Do not install the projector in a location where it
Positioning the Projector
1.
Installation Measurements for BrightLink 425Wi/435Wi and PowerLite 425W/
435W - Wide
2.
Installation Measurements for BrightLink 425Wi/435Wi and PowerLite 425W/
435W - Tele
3.
Installation Measurements for BrightLink 430i and PowerLite 420/430 - Wide
1 Package Contents
•
Use the bolts or screws supplied with the wall mount to install it as directed in this guide. Do not
substitute these bolts with any other types.
•
Use the bolts or screws supplied with the interactive module (boxed separately) to attach it as directed in
this guide. Do not substitute these bolts with any other types.
•
You need
Approx. 22 lbs. (10 kg)
Maximum load capacity
12.1 lbs. (5.5 kg)
Arm length
59.4 inches (1510 mm) (from wall plate attachment point to arm cover point)
Vertical angle adjustment range
0 to 5.3 inches (0 to 134 mm) (arm length minimum)
0 to 9.1 inches (0 to 230 mm) (arm length maximum)
Vertical t
18 in. (457 mm)
8 in. (203 mm)
4.2 in.
(107 mm)
3.0 in.
(75 mm)
4.4 in. (2 mm)
0.6 in. (15 mm)
1.8 in.
(46.3 mm)
4.7 in.
(120 mm)
6.3 in. (160 mm)
8.9 in. (225 mm)
9 in. (230 mm)
9.7 in. (247 mm)
9.8 in. (248 mm)
Installation.book Page 8 Monday, February 13, 2012 4:23 PM
3 Connecting Devices
Make sure you have the power cord, computer cable, and other parts at the location where the wall mount is
to be installed.
Make sure you also have all necessary cables for devices, such as a document camera or microphone, that you
will connect to the projector. For details, refer to the User's Guide on the projector CD or at