Allied GX1050 Technical Manual
Read Online
Read the Allied GX1050 Technical Manual online using the built-in PDF viewer.
Key Pages of Document
Allied Vision Technologies Canada Inc. 101-3750 North Fraser Way Burnaby, BC V5J 5E9 / Canada Technical Manual 700056A Updated 19 January 2010 ...
Page 2 Table of Contents Table of Contents ......................................................................................................... 2 Introduction ............................................................................................................ 5 Precautions ............................................................................................................. 5 Warranty ............................ ...
Page 3 Legal notice For customers in the U.S.A. (FCC Compliance Information) This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, ...
Page 4 Contacting Allied Vision Technologies • Technical information: http://www.alliedvisiontec.com • Support: [email protected] Allied Vision Technologies GmbH (Headquarters) Taschenweg 2a 07646 Stadtroda, Germany Tel.: +49.36428.677-0 Fax.: +49.36428.677-28 e-mail: [email protected] Allied Vision Technologies Canada Inc. 101-3750 North Fraser Way Burnaby, BC, V5J 5E9, Canada Tel: +1 604-875-8855 Fax: +1 604-8 ...
Page 5 Introduction The GX1050 series of cameras are sensitive, 112 frames per second, 1 megapixel, Gigabit Ethernet cameras based on the Kodak KAI-01050 CCD sensor. These cameras support the use of 1 or 2 gigabit Ethernet ports in a LAG configuration for higher bandwidth requirements. Precautions READ INSTALLATION GUIDE CAREFULLY. This document contains specific information which is necessary for the correct operation and treatme ...
Page 6 Specifications Sensor Type Kodak KAI-01050 Sensor Shutter Type Progressive Interline Image Resolution 1024 x 1024 pixels Pixel Size 5.5μm x 5.5μm Optical Format 1/2 inch Lens Mount C-mount with adjustable back focus. Color Sensor Filter Pattern† Bayer Full Resolution Frame Rate 112 fps I/O 2 isolated inputs, 4 isolated outputs, RS-232 TX/RX, video auto-iris, motorized iris, focus, and zoom Power Requirements Less than 5.4 ...
Page 7 Supported Features Imaging Modes free-running, external trigger, fixed rate, software trigger Fixed Rate Control 0.001 fps to maximum frame rate External Trigger Delay 0 to 60 seconds in 1 microsecond increments External Trigger Event rising edge, falling edge, any edge, level high, level low Exposure Time 10 microseconds to 60 seconds in 1 microsecond increments Gain 0 to 34dB Region of Interest (ROI) independent x and y con ...
Page 10 GIGABIT ETHERNET PORTS These ports conform to the IEEE 802.3 1000BASE-T standard for Gigabit Ethernet over copper. It is recommended that CAT5E or CAT6 compatible cabling and connectors be used for best performance. Cable lengths up to 100m are supported. For higher bandwidth requirements, both ports can be used in a link aggregation group (LAG) configuration. GENERAL PURPOSE IO PORT PIN FUNCTION 1 POWER GROUND 2 EXTERNAL P ...
Page 11 EXTERNAL POWER This connection provides the main power for the camera. The camera operates from a DC voltage between 5V to 24V. The current capacity of the power supply can be estimated by dividing the camera’s power requirement by the external power voltage. It is also recommended to factor this by about 50% as follows: Power supply current capacity = (power specification / external voltage) x 1.5 The conductor used for ...
Page 12 SYNC OUTPUTS (1 to 4) These signals are optically isolated and require the user to provide a high voltage level (USER VCC) and signal common (USER GROUND). USER VCC can be from 5V to 24V. ICC is a function of USER VCC and load resistor R. An example of the functional circuit is indicated in the following diagram. 5V TO 24V 100K V LOAD 442R PIN 10. USER VCC R VCC-USER GND-USER SYNC OUT USER TRIGGER CIRCUIT T4 CAMERA CIRCUIT T ...
Page 13 These signals only function as outputs and can be configured as follows: Exposing Corresponds to when camera is integrating light. Trigger Ready Indicates when the camera will accept a trigger signal. Trigger Input A relay of the trigger input signal used to “daisy chain” the trigger signal for multiple cameras. Readout Valid when camera is reading out data. Strobe Programmable pulse based on one of the above events. Im ...
Page 14 LENS CONTROL PORT PIN FUNCTION 1 IRIS + 2 IRIS - 3 FOCUS + 4 FOCUS - 5 ZOOM + 6 ZOOM - 7 AUTO IRIS SIGNAL 8 GROUND LENS CONTROL PORT AS SEEN FROM BACK OF CAMERA This connector provides the signals necessary to control the iris, focus, and zoom of most commercially available TV Zoom lenses. The camera can be configured to operate lenses with unipolar voltage requirements of 6V up to 12V or lenses which operate with bipolar v ...
Page 15 Cleaning the Sensor DO NOT CONTACT CLEAN SENSOR UNLESS ABSOLUTELY NECESSARY. Identifying Debris Debris on the image sensor or optical components will appear as a darkened area or smudge on the image that does not move as the camera is moved. Do not confuse this with a pixel defect which will appear as a distinct point. Locating Debris Before attempting to clean the image sensor, it is important to first determine that the p ...
Page 16 Adjusting the C-mount THE C-MOUNT IS ADJUSTED AT THE FACTORY AND SHOULD NOT REQUIRE ADJUSTING. If for some reason, the C-mount requires adjustment, use the following method. Loosen Locking Ring Use an adjustable wrench to loosen locking ring. Be careful not to scratch the camera. When the locking ring is loose, unthread the ring a few turns from the camera face. A wrench suitable for this procedure can be provided by AVT C ...
Page 17 Network Card Configuration Operating GigE Vision GX cameras using multiple network adaptors The GX series cameras offer two Gigabit Ethernet ports for image data transfer and control. Users can connect one or both ports on the GX to Ethernet adapter ports on a host computer. Connecting both ports will increase the available bandwidth to 240 MB/sec, allowing higher frame rates and resolutions than a single port connection. ...
Page 18 5. Click on “OK” to validate your change (the “Properties” window will close). The Property list will be different between different types/brands of gigabit Ethernet interface cards. If "Jumbo Frames" does not appear in this list, then your card probably does not support it. If your card does not support Jumbo Frames, then your CPU usage will be higher. 6. Re-open the "Properties" of the PRO/1000 GT adapter by right- ...
Page 19 12. Select the two Ethernet ports to which the GX camera will be connected. These ports will form our LAG or TEAM. Click “Next” to continue. 13. Choose “Static Link Aggregation”. Click “Next” to continue. 14. The LAG group will now be configured. You may be asked to permit the “AVT_Prosilica GigE Vision Filter Miniport” installation on the new LAG adapter. Click “Continue Anyway”. ...
Page 20 15. Once completed the properties of the TEAM (LAG) that has just been created will appear. A new Network Connections Icon corresponding to the LAG group is created. You have now completed the Link Aggregate Group configuration. 16. Reboot the system and install GigE Sample Viewer. ...
Related Devices for Allied GX1050:
AFFIX LABEL HERE INSTALLATION AND SERVICING INSTRUCTIONS UPFLOW, DOWNFLOW OR HORIZONTAL TWO STAGE HEAT VARIABLE SPEED GAS-FIRED NON-CONDENSING WARM AIR FURNACE User guide for the Allied Downflow or Horizontal 2 Stage Heat Variable Speed Gas Fired Non-Condensing Warm Air Furnace Furnace. This guide explains the features and wiring setup, security instructions, specifications.
Technical Manual V4.0.1 02 February 2007 Allied Vision Technologies GmbH Taschenweg 2a D-07646 Stadtroda / Germany AVT Guppy Complete service manual for the Allied Guppy Digital Camera. The document highlights operating procedures and firmware installation, user instructions, detailing setup, system parameters.
506468-01 Page 1 of 24 Issue 1946 Save these instructions for future reference INSTALLATION INSTRUCTIONS 4HP16LT Series Split System Heat Pump (P) 506468-01 *P Manual for installation and usage of the Allied 4HP16LT Series Heat Pump. It explains configuration options and setup, wiring setup, technical troubleshooting, device instructions.
Technical guide for the Allied SX-190 Receiver. It outlines installation and setup instructions, operational guidelines, component overview, support details.
Operator and Parts Manual 032012 P3549A Loader Models 895, S895, 895HSL, S895HSL, 895 TSL & S895 TSL Maintenance instructions for the Allied S895 TSL Compact Loader. It contains information on service contacts, software installation, basic operation.
Vibratory Plate Compactor/Driver Thoroughly read and understand the content of this manual before using the Allied Ho-Pac. The safe and efficient use of the All Installation reference manual for the Allied Ho-Pac 1000C Power Tool. The documentation includes details on replacement parts, troubleshooting, operating modes, safety guidelines.
Thoroughly read and understand the content of this manual before using the Allied Breaker. The safe and efficient use of the Allied equipment depends upon prope Device instruction guide for the Allied AR Series Construction Equipment. It provides information on safety and network configuration, control functions, troubleshooting guides.
S168-606-001 Rev- /Schuco byAllied Schuco S6000 50 PSI Air Compressor Operator's IVIanual ^ Cautifin Federal law restricts this device to sale by or on order of Comprehensive instruction manual for the Allied Schuco S6000 Air Compressor. It outlines the setup and operating instructions, service procedures, connectivity setup.
Security Camera: Frequently Requested PDF Instructions
DISTRIBUTED BY User guide for the D-MAX DWC-548DV Security Camera. The document includes calibration steps, wiring setup, diagnostic information, installation guides.
Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. ISD220200-QG-D Quick Start G Technical reference manual for the GeoVision GV-IP Speed Dome IP Camera. The document guides users through device calibration, operating instructions, device overview.
FIRST EDITION 09-2011 96 SCP-2270H/2270 1/4" 27x PTZ Dome Camera 600TVL D&N ICR 24VAC 27x Technical Specifications Controllers (optional) SPC-6000 SPC-1010 Key Complete usage guide for the Samsung WV SCP-2270H Security Camera. The document details configuration and backup procedures, performance details, testing procedures.
Please carefully read these instructions before using this product. Save this document for future use. model no: C7012-RW Outdoor Fixed IP Dome Camera Quick Sta Professional operation guide for the avertX C7012-RW Security Camera. It describes maintenance tasks and assembly reference, safety features, safety protocols.