Hitachi CS 40EA Technical Data And Service Manual

credit in North America and according to small-quantity production regulatory limits in Europe. Therefore, we cannot expand the sales of such products. And in line with the trend toward targeting general users instead of semiprofessionals for chain saw ...

http://www.hitachi-koki.com/manual_view_export/ • Throughout this TECHNICAL DATA AND SERVICE MANUAL, a symbol(s) is(are) used in the place of company name(s) and model name(s) of our competitor(s). The symbol(s) utilized here is(are) as follows: Competitors Symbols Utilized ...

SPECIFICATIONS --------------------------------------------------------------------------------------------------------------2 1. Specifications---------------------------------------------------------------------------- ...

Equipped with the Pure Fire Engine, a clean emission engine compliant with the second emission regulations specified in the USA and Europe (EPA PHASE2, CARB Tier3, 2010/26/EC). (Note that emission values differ depending on countries and regions.) Regulation g/kWh CS 40EA (PS) 39.6 mL THC+NOx (Unburned material + nitro ...

CS 40EA (PS) Remarks Type of engine Two-cycle, air-cooled gasoline engine - Bore size x stroke 41.0 mm dia. x 30 mm - Engine displacement 39.6 mL - Max. engine speed 13,000 min-1 - Service revolutions 7,000 to 9,000 min-1 Revolutions at actual work Idle engine speed 2,900 to 3,300 min-1 - Rotating direction Clockw ...

(Superior specifications: ) HITACHI Maker Model Item CS 40EA (S) CS 40EA (PS) C D Engine displacement mL 39.6 40.2 40.9 Max. power output kW 1.8 1.8 1.58 1.73 Fuel tank capacity mL 380 410 370 Oil tank capacity mL 240 280 250 Guide bar length cm (inch) 33 to 45 (13” to 18”) 40 to 45 (16” to 18”) 33 to 45 (13� ...

In the interest of promoting the safest and most efficient use of the Models CS 40EA (S) and CS 40EA (PS) Engine Chain Saws by all of our customers, it is very important when concluding a sale that the salesperson carefully ensure that the buyer seriously recognizes the importance of the Handling Instructions, and fully understands ...

Read and understand the meaning of each symbol described in the Handling Instructions, and properly instruct the users. 2. Thorough Instruction to the Customers A. Starting and stopping procedures Thoroughly instruct customers about the difference between the cold starting procedure and the hot restartin ...

Situation Cause Measure Starter handle cannot be pulled. The crankshaft does not rotate. Seizure of the piston ring Seizure of the connecting rod bearing Disassembly and parts replacement No fuel in the tank Replenishment Clogged fuel filter Cleaning or replacement Faulty vent hole (check valve) on the tank Replacement D ...

SHOOTING GUIDE in the previous section as the context for the following descriptions. 1. Precautions on Maintenance, Inspection and Repair • The fuel used readily ignites; therefore, never bring the product near a flame. • Use new gaskets at reassembly. � ...