ATTO Technology 2500C Installation And Operation Manual

Text of ATTO Technology 2500C Installation And Operation Manual

ATTO Technology, Inc.

ATTO iPBridgeTM 2500C/R/D Installation and Operation Manual © 2005 ATTO Technology, Inc. All rights reserved. All brand or product names are trademarks of their respective holders. No part of this manual may be reproduced in any form or by any means without the express written permission of ATTO Technology, Inc. 8/2005 Document Control Number: PRMA-0335-000

1 iPBridge 2500 provide storage options ............................................1

iPBridge2500 features Connectivity, infrastructure solutions 1.1 ATTO iPBridge 2500R/D ......................................................3 Dimensions Environment Power SCSI interface Ethernet interface Serial interface LED indicators Installation instructions 1.2 ATTO iPBridge 2500C ..........................................................6 Dimensions Envi

2.5 Additional configurations ....................................................19

Change the current user name, password Set the Real Time Clock Create a read only password or user name Configuring SCSI devices SNMP protocol 3 ATTO ExpressNAV interface .............................................................21 Browser compatibility To optimize ExpressNAV in Internet Explorer Accessing ExpressNAV Opening an ExpressNAV session 3.1 ExpressNAV pages

Checking SCSI devices

Checking iPBridge SCSI ports Checking iPBridge Ethernet ports Checking the LAN/WAN Checking Ethernet Host Adapter or NIC Checking the applications Checking the host system Checking the Operating System 7 Alternative interface options ............................................................33 Use the serial port or header Use Telnet 7.1 CLI provides ASCII-based interface ...................................35 7.1.1 CLI commands s

7.1.5 SCSI configuration commands .............................47

SCSIInitID SCSIPortBusSpeed SCSIPortList SCSIPortReset SCSIPortResetOnSta

7.1.8 NDMP commands ...................................................53

NDMPAuthType NDMPMaxVersion NDMPPortNumber NDMPStatus 7.1.9 iSCSI commands ....................................................55 iSCSIAlias iSCSIChap iSCSIChapSecret iSCSIPortNumber iSCSITarget iSCSITargetNameDisplay iSNSLoginControl iSNSServer MultiTargetMode 7.1.10 Mapping commands .............................................57 A

ATTO Technology Inc. iPBridge Installation and Operation Manual

1 iPBridge 2500 provide storage options Two protocols available on the iPBridge 2500 allow storage devices such as hard drives, tape drives and libraries and CD jukeboxes to attach easily to Internet Protocol networks such as Gigabit Ethernet. The ATTO iPBridge supports the high throughput needs of streaming data transfers, optimizing performance and management using ATTO Technology intellige

ATTO ExpressNAV: a web-based management

application that allows all of the configurable settings for the iPBridge to be defined, viewed and edited. Connectivity, infrastructure solutions The topology of a heterogeneous Storage Area Network shown below demonstrates the critical role ATTO products play in the design and implementation of a SAN. Whether your application needs are data-intensive or band- width intensive, you need to store and mana
ATTO Technology Inc. iPBridge Installation and Operation Manual 1.1 ATTO iPBridge 2500R/D The ATTO iPBridge 2500R/D is a 1-Gigabit Ethernet to SCSI 1U full-rack bridge for midrange high performance, cost effective solutions in enterprise environments. The iPBridge 2500R/D includes a single power supply, two Ethernet data ports, an Ethernet management port which may be used as a data port in the iPBridge 2500 iSCSI-configured model, a serial management p

Installation: ATTO iPBridge 2500R/D

Serial interface The RS-232 serial port provides support for remote monitoring and management through a command line interface. It is set at the factory at 115,200 bps. Pin outs of the RJ11 connector, part number CBL- 0911-001 are LED indicators The LED indicators can be viewed from the front of the iPBridge 2500R/D. Ethernet Link & Activity: Each Ethernet port has its own set of LEDs to show link status and speed as
ATTO Technology Inc. iPBridge Installation and Operation Manual Exhibit 1.1-2 Overview of iPBridge 2500R/D standard 19-inch rack using a centered 1.25-inch (31.7 mm) hole pattern Ethernet management port RS-232 port Ethernet data ports SCSI ports Fault LED SCSI activity LEDs power receptacle Centered 1.25" hole pattern for "L" brakcets 10" 16.91" 1.72" air vents Back (connector) side Front side with LEDs (see Exhibit 2.2-1)

Installation: ATTO iPBridge 2500C

1.2 ATTO iPBridge 2500C The ATTO iPBridge 2500C is a 1-Gigabit Ethernet to SCSI embeddable cPCI bridge for high performance, cost effective solutions in enterprise environments. The iPBridge 2500C includes two Ethernet data ports, an Ethernet management port which may be used as a data port in the iPBridge 2500 iSCSI- configured model, a serial management port and two SCSI ports. It includes a battery-backed Real- Time-
ATTO Technology Inc. iPBridge Installation and Operation Manual GbE cables must be at least CAT-5E certified for 1000 Mb/sec. use. Serial interface The RS-232 serial port provides support for remote monitoring and management through a command line interface. It is set at the factory at 115,200 bps. Pin outs of the RJ11 connector, part number CBL- 0911-001 are Installation instructions 1 Install the iPBridge 2500C in the target device. (See the board layo
Installation: ATTO iPBridge 2500C Exhibit 1.2-2 ATTO iPBridge 2500C board layout Mounting hole 5.756" Mounting hole -.216 " 6.158" 5.974 " -.218" Ethernet management port RS-232 port Ethernet data ports SCSI
ATTO Technology Inc. iPBridge Installation and Operation Manual 2 Configuring the iPBridge Set up your iPBridge by first getting an IP address, then use ATTO ExpressNAV to map devices. Default values are appropriate for most configurations, but may be modified for your needs using ATTO ExpressNAV. Configuration of the ATTO iPBridge, also known as iPBridge Services, is available through the ATTO ExpressNAV, a browser-based interface, or the Command Line

ATTO Technology Network Hardware Owners Instructions: