Uniden DECT2085 Owner's Manual

Welcome........................................................................4 Accessibility..............................................................4 Installing the Phone.....................................................5 Choosing the Best Location......................................5 Installing the Battery................... ...

Making a Call from the Phonebook.........................34 Chain Dialing from the Phonebook.........................34 Switching to the Handset Speakerphone . During a Call.....................................................34 Using Caller ID, Call Waiting, and Redial Lists........ ...

 Maintenance................................................................53 Specifications..........................................................53 Battery Information.................................................53 Power Failures........................................................54 Troubleshooting.............................................. ...

Note: Illustrations in this manual are used for explanation purposes. Some illustrations in this manual may differ from the actual unit. As an Energy Star® Partner, Uniden has determined that this product or product models meets the Energy Star® guidelines for energy efficiency. Energy Star� ...

Installing the Phone Choosing the Best Location When choosing a location for your new phone, here are some important guidelines you should consider: Note: For maximum range: Keep both the base and handset antennas free of obstruction. When the handset is not in use, place the handset in an upright position. Metal and reinforced concre ...

Use only the Uniden BT-1008 rechargeable battery pack supplied with your cordless telephone. Press in on the handset battery case cover. Use the finger indention for a better grip and slide the cover downward to remove. Replace the battery case cover back on the handset and slide it upwards until it clicks into place. Plug the batter ...

Installing the Belt Clip Line up the holes on each side of the handset. To attach the belt clip, insert into the holes on each side of the handset. Press down until it clicks. To remove the belt clip, pull either side of the belt clip to release the tabs from the holes. Connecting the AC adapter Base To avoid risk of fire and shock, on ...

Use only the Uniden PS-0007 AC adapter supplied with your cordless telephone. Charging the Handset Connect the AC adapter to the DC IN 9V jack. Connect the AC adapter to a standard 120V AC wall outlet. DO NOT use an AC outlet controlled by a wall switch. Route the cord. Connect the AC adapter to the DC IN 9V jack. Con ...

Make sure that the charge LED illuminates. What if the charge LED doesn’t light up? Check the AC adapter connection. The handset makes good contact with the charging contacts. Charge your handset at least 15 to 20 hours before plugging into the phone line. Connecting to the Phone Line Make sure that the battery pack is fully charged. ...