Digitus DN-13007 Operation & User’s Manual
Read Online
Read the Digitus DN-13007 Operation & User’s Manual online using the built-in PDF viewer.
Key Pages of Document
CHAPTER1 INTRODUCTION .........................................................................................................4 1.1 About this Manual...........................................................................................4 1.2 Support Services .............................................................................................4 CHAPTER2 PRODUCT OVERVIEW........................................................ ...
5.2 Printing by LPD/LPR ...................................................................................32 5.3 Using the Server on BSD UNIX/Linux..........................................................32 5.4 Using the Server on RedHat Linux (Fedora Core).......................................33 CHAPTER6 FILE SERVER FUNCTION.................. ...
referred to as “Server”). This server is designed to connect your AIO/MFPs (All-In-One/Multifunction Peripheral), printers, USB mass storages (hard drives, flash drives, and memory card readers), and scanners, to your network, allowing all network users access to these shared USB devices resources. 1.1 About this Manual This manual provides introductor ...
The network connector of this Server is designed for 10 Mbps or 100 Mbps Ethernet networks and connects to the network via a twisted pair category 5 cable (10baseT and 100baseTX) or better. 2.3.2 USB Host Ports This Server has two USB host ports which are USB 1.1/2.0 low, full, and high speed compliant and successfully tested with USB 1.1/2.0 printers, Mass Storage, and AIP/MFPs. 2.3.3 Init Button The Init ...
Please refer to the table below to select the appropriate installation method. The Control Center tool is available on the CD or from Digitus’s website. Functi on OS Method Description Standard Windows Add Printer Wizard Installation of LPR, Raw TCP (JetDirect), Local Port Using SMB, and IPP Windows Control Center Tool Installation of LPR, Raw TCP, Local Port Using SMB Apple MAC OS x Printer Set ...
computer systems and environments. 3. Easy to Install: The MFP server installs, operates and is managed in a reliable and easy fashion. 4. Security: You can assign administrator name and password to restrict login. 5. Monitoring: The MFP server’s web pages and user software allow you to continuously monitor MFP status. 6. Future Proof: The firmware stored in the MFP server ...
1. Make sure that your USB devices are switched off and that the MFP server’s Power Adapter is disconnected. 2. Connect the USB devices to the USB ports using the USB cables. 3. Connect the MFP server to the network using a twisted pair category 5 cable, 10baseT or 100baseTX. 4. Turn on the USB devices and make sure it is ready for use. 5. Connect the Power Adapter to the server. The power indicator ...
Automatic IP Address Assignment Manual IP Address Assignment 3.2.5 Host Names and Host Name Rules The Host Name of the Server is specified by “DN-13007”in Factory Parameter. If you put two or more MFP servers in your local area network, to avoid using same Host Names you have to change the Host Names by using MFP Server Control Center or server’s web pages. If your Host Name is ...
and password (default: admin). 5. After you login successfully, from the Server’s menu, select TCP/IP. The Set IP Address dialog appears. 10 ...
dynamic using DHCP). When assigning a static IP address you also have to define Subnet Mask and Default Gateway. If you choose Automatically get IP by DHCP, you can use desired DNS by clicking the Manual DNS button and manually assigning a DNS. 7. Click Apply to save your settings. And the server will reboot. 8. You have now finished the procedure of setting the IP address. ...
4. Login your administrator (default: admin) and password (default: admin). 5. Click TCP/IP icon. 6. Click the button that corresponds to your choice of IP setting methods (static 12 ...
define Subnet Mask and Default Gateway. 7. Click Submit to save your settings. And the server will reboot. You have now finished the procedure of setting the IP address. 3.3 Naming Your USB Devices 3.3.1 Printer Names Default Printer Name 1. The system will set the printer model names as the default printer names. The system only allows a 12 characters long USB device name. For ...
B. Using Server’s Web Pages 1. Go to the web page and click CONFIG icon. 2. Login your administrator (default: admin) and password (default: admin). 3. Click USB Device Information 14 ...
3.3.2 Storage Names The local drives of the two storages in USB1 port and USB2 port are named as USBx_DxPx, where USBx represents the USBx port, Dx represents the the x-th Disk (in particular to card reader plugging in multiple cards) and Px represents the x-th partition. 3.3.3 Scanner Names The name of connected scanner of HP office jet series consists of the “vender” + “model”. F ...
4.1 Overview of Installation Methods This chapter describes how to add network printers to Windows PC. Table List for Installing Network Printer Windows Platform Printing Protocols Method Standard Windows Add Printer Wizard SMB/CIFS Printing MFP Server Control Center’s Add Printer Windows 98, ME, 2000,XP and 2003 IPP Printing Standard Windows Add Printer Wizard Standard Windows Add Printer Wizard LPR Printing MFP Serve ...
LAN HUB/Switch MFP Server PC PC USB Printer 4.2.2 The Server and Windows PC on Different LANs Example: Wired Windows PC across Internet Router Internet Router MFP Server USB Printer LAN HUB/Switch LAN HUB/Switch PC 4.3 Setting up Local Windows Printer Driver You are advised to install your Windows printer driver in advance. For most printers, you can install the printer drivers as the following procedure: 17 ...
then click Printers and Faxes. 2. Double click Add Printer to start the Add Printer Wizard, and then click Next. 3. Click Local printer, clear the Automatically detect and install my Plug-n-Play printer check box to avoid having to wait for the completion of another printer search, and then click Next. If you leave this option selected, Windows will attempt to find the printer itse ...
(default: DN-13007) or IP address of MFP server. In the Port Name box, type your desired names or USB1_LPR or USB2_LPR for printer connected to USB1 port and USB2 port, respectively. # If your server is running on a different LAN than your Windows PC such as Internet PC, you must type server’s IP address in Printer Name or IP 19 ...
7. Click Custom/settings. 8. Click Settings and confirm that the settings are as below. The queue names are USB1_LQ, USB2_LQ for USB1 port 1 and USB2 port, respectively. Click OK. 20 ...
