Toshiba BU030 Specifications

D4212818G CCD Camera BU Series BU030/BU031 BU080/BU130 BU030C/BU030CF BU130/BU130CF Specifications Ver.5.2 ...

Contents RESTRICTION FOR USE ..................................................................................................................................... 1 CASES FOR INDEMNITY (LIMITED WARRANTY) ......................................................................................... 2 USAGE PRECAUTIONS ......................................... ...

RESTRICTION FOR USE  Should the equipment be used in the following conditions or environments, give consideration to safety measures and inform us of such usage: (1) Use of the equipment in the conditions or environment contrary to those specified, or use outdoors. (2) Use of the equipment in applications expected to cause potential hazard to peopl ...

CASES FOR INDEMNITY (LIMITED WARRANTY) We shall be exempted from taking responsibility and held harmless for damage or losses incurred by the user in the following cases.  Natural disasters, such as an earthquake and thunder, fire or any other act of God; acts by third parties; misuse by the user, whether intentional or accidental; use under extrem ...

USAGE PRECAUTIONS  Handle carefully Do not drop the equipment or allow it to be subject to strong impact or vibration, as such action may cause malfunctions. Further, do not damage the connection cable, since this may cause wire breakage.  Environmental operating conditions Do not use the product in locations where the ambient temperature or hum ...

 Occurrence of moiré If you shoot thin stripe patterns, moiré patterns (interference fringes) may appear. This is not a malfunction.  Occurrence of noise on the screen If an intense magnetic or electromagnetic field is generated near the camera or connection cable, noise may be generated on the screen. If this occurs, move the camera or the ca ...

1. Overview This BU series is an integrated-(one-body)-type camera that adopts all pixel data readout inter line CCD. These are BU030 (VGA 1/3 type), BU031 (VGA 1/2 type), BU080 (XGA), BU130 (SXGA). Suffix [C] or [CF] is attached to the color models. For video output and camera control, the USB 3.0 interface standard is adopted for high transfer rate ...

2.8 IIDC2* Digital Camera Control Specification Ver.1.0.0 conformity This product is based on IIDC2 Digital Camera Control Specification Ver.1.0.0. 2.9 e-CON* Connector adoption The e-CON connector adoption enables to assemble the cable easily without using special tools. 2.10 Binning mode B/W models have binning mode. In this mode, pixel data is comb ...

3. Configuration (1) Camera body * No application software and manuals are attached to this camera. 4. Optional part - Camera mounting kit Model name: CPTBU * Contact your dealer / distributor for details of option units. ...

5. Functions 5.1 Gain Manual gain control is available from 0 to +18dB. Notes on gain setting: Setting the gain value too high increases noises. When you adjust the brightness of the image, I ask you to have final image quality checked with your environment. 5.2 Black Level Black level is adjustable from -5% to +25% as white saturation level is 100%. ...

5.8 Random Trigger Shutter An image is captured at the desired timing using trigger signal input. External trigger signal from trigger input connector and software trigger from control command via the USB 3.0 interface are available (Only in Edge mode). Trigger polarity is selectable (High active / Low active). Note that Random Trigger Shutter will ca ...

Notes on long exposure: - When you set the exposure time longer than approximately 1 second, white spots and the unevenness in highlight portion might occasionally be observed on screen. This phenomenon is due to the characteristics of the CCD device. It’s not a malfunction of the camera itself. Note on Random Trigger Shutter: - When the trigger s ...

5.10 Event Camera notifies FrameTrigger status and other information by USB3 Vision Event Packet. - FrameTrigger : Reception of Frame Start Trigger - FrameTriggerError : Rejection of Frame Start Trigger - FrameTriggerWait : Start of waiting for Frame Start Trigger - FrameTransferStart : Start of transferring streaming data - FrameTransferEnd : End of ...

5.11 GPIO Selected signals are output from GPIO pins of I/O connector. Following signals are selectable. Output signal is 5V CMOS. TIMER0 ACTIVE : This signal can be used as strobe control signal. The delay time and pulse width of this signal are configurable. USER OUTPUT : Level selectable user output by register setting. EXPOSURE ACTIVE : Period fr ...

5.12 Scalable mode Scalable mode is to read out arbitrary area of the image. Only single rectangle is selectable. Concave or convex shape is impossible. The number of selectable window is only one. - Window size: {A+2*m (H)} * {B+2*n (V)} A, B = minimum unit size m, n = integer The window size is equal or less than maximum image size. - Start address ...

5.13 Binning Mode B/W models have binning mode. In the binning mode, pixel data is combined by vertical and horizontal. BU030 BU031 BU080 BU130 Binning mode 2(H)*2(V) 2(H)*2(V) 2(H)*2(V) 2(H)*2(V) 5.14 User Free Memory A free memory area is available to read and write arbitrary data for user. Individual numbers can be assigned when multiple BU camera ...

6. Specifications 6.1 Electrical specification Model Name BU030 BU031 BU080 BU130 Imager all-pixel-data-readout interline transfer CCD Number of total pixels (H) * (V) 692*504 692*504 1077*788 1348*976 Number of effective pixels (H) * (V) 659*494 659*494 1034*779 1296*966 Number of Video out pixels (H) * (V) 640*480 640*480 1024*768 1280*960 Scanning ...

Model Name Without IR-cut filter BU030C BU130C With IR-cut filter BU030CF BU130CF Imager all-pixel-data-readout interline transfer CCD Number of total pixels (H) * (V) 692 * 504 1348 * 976 Number of effective pixels (H) * (V) 659 * 494 1296 * 966 Number of Video out pixels (H) * (V) 640 * 480 1280 * 960 Scanning area (H) * (V) [mm] 4.88 * 3.66 (1/3 t ...

6.2 Internal sync signal specification BU030 BU031 BU080 BU130 Fundamental clock frequency 50.000MHz ±100ppm 50.000MHz ±100ppm 45.000MHz ±100ppm 50.000MHz ±100ppm BU030C BU130C Fundamental clock frequency 50.000MHz ±100ppm 50.000MHz ±100ppm 6.3 Electronic shutter specification BU030 BU031 BU080 BU130 Exposure time MANUAL MANUAL 10μs to 16s 10� ...

6.5 GPIO Output signal specification Output channel 2 channel Output signal TIMER0 ACTIVE, USER OUTPUT, EXPOSURE ACTIVE, FRAME ACTIVE, FRAME TRANSFER, FRAME TRIGGER WAIT Output level 5V CMOS Maximum Current +/-32mA Polarity High active / Low active (factory setting : Low active) Timer0 Active Delay 0 to 2000000μs (factory setting : 0μs) Duration 0 ...