RCA RTD750 Operation & User’s Manual
Text of RCA RTD750 Operation & User’s Manual
RCA RTD750 THIS PRODUCT UTILIZES A LASER. USE
OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE. DO NOT OPEN
COVERS AND DO NOT REPAIR
YOURSELF. REFER SERVICING TO
QUALIFIED PERSONNEL.
This symbol indicates "dangerous voltage"
inside the product that presents a risk of
electric shock or personal injury.
WARNING
To reduce the risk of fire or electric
shock,
Table of Contents
1
Chapter 1: Connections and Setup
Things to Consider Before Connecting
Components ........................................................ 3
Cables to Connect Components to Your Home
Theater Music Jukebox...................................... 3
Front of the Home Theater Music Jukebox........... 4
Back of the Home Theater Music Jukebox............ 5
Description of Jacks ......................................................... 5
Connectin
Table of Contents Deleting a Movie Group .....................................32
Getting Movie Info .............................................33
Editing Movie Disc Info ......................................33
Deleting Movies ..................................................33
Chapter 4: Radio Features
AM/FM Radio .........................................................34
Playing the Radio ................................................34
Autotunin
Chapter 1: Connections and Setup
Illustrations contained in this document are for representation only.
Things to Consider Before Connecting Components
Protect Components From Power Surges
•
Connect all components before plugging any power cords into the wall outlet.
•
Always turn off the TV and other components before you connect or disconnect any cables.
Position Cables to Avoid Audio Hum or Interference
•
Insert all cable plugs firmly i
Chapter 1: Connections and Setup Front of the Home Theater Music Jukebox
1. POWER indicator — Indicates when the unit is on or in standby.
2. POWER — Toggles the unit between on and standby.
3. PHONES jack — Allows you to connect headphones for private listening.
4. Arrow buttons — Move the on-screen highlight.
5. USB jack — Allows you to connect a keyboard or Lyra portable mp3 player or some USB keyboards.
6. SELECT — Selects menu
Chapter 1: Connections and Setup Back of the Home Theater Music Jukebox
When connecting, make sure you connect Output jacks to Input jacks, Video to Video, Right Audio to Right Audio, etc. A description of each jack
follows.
Description of Jacks
1. ETHERNET — Connects to your home network or router using an Ethernet cable.
2. MODEM — Connects to your home telephone wiring for dial-up Internet access.
3. Component Video Out jacks— If your
Chapter 1: Connections and Setup Connecting your Home Theater Music Jukebox
1. Connect the Music Jukebox to the TV
Connect the VIDEO OUT jack from the Music Jukebox to the video input on the back of your TV. If your TV has line-level audio out jacks (red and
white connectors) and you want to listen to your TV programming in full surround sound, connect them to the desired audio input jacks on the
back of your Music Jukebox.
Note: If your TV has
Chapter 1: Connections and Setup Positioning your Speakers
Your system is equipped with Dolby Digital and DTS (Digital Theater System) decoding, which enables the unit to reproduce sound effects as they were
intended. However, the speakers must be properly positioned and balanced. In order to enjoy Dolby Digital and DTS-enhanced sound quality, six
speakers are recommended: One center speaker, left and right main speakers, rear left and right sp
Chapter 1: Connections and Setup Connecting the Speakers
For better sound quality, Center speaker, rear speakers and subwoofer are preferred. Adding center and rear speakers will enhance surround effects.
Adding a Subwoofer will increase bass response. If you want to enjoy a full frequency range of sound effects, it is recommended to use the subwoofer
with the speakers to maintain adequate bass signal for the surround sound effect.
Speaker cord
Chapter 1: Connections and Setup Put Batteries in the Remote Control
Insert the batteries matching the polarities (+ and –) on the batteries with the diagram
in the battery compartment.
Important Battery Information
•
If you’re not going to use the remote for a month or more, be sure to remove the
batteries because they can leak and cause damage.
•
Dispose of batteries in the proper manner, according to federal, state, and local
regulat
Chapter 1: Connections and Setup VCR1
ON • OFF
TV
MOVIES
VCR2
AUX
SAT•CABLE
CH•PAGE+
RADIO
MUSIC
CH•PAGE-
INFO
GUIDE
OK
CLEAR
MENU
1
2
3
4
5
6
7
8
9
0
INPUT
SETUP
REV•DEL
PLAY
RECORD
PAUSE
STOP
GO BACK
MUTE
SELECT
MENU SUBTITLE
DVD
ANGLE
SURR
VOL
VOL
FWD•SPACE
_/.?'
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
@-*#
How to Find Your TV’s Video Input Channel
You must tune your TV to the Video Input Channel since you are using the Music Jukebo
Chapter 1: Connections and Setup What Is The Setup Process?
To optimize your Home Theater Music Jukebox so that you can enjoy all of its capabilities, you will need to go through a setup procedure.
You will encounter two types of setup procedures. The first type of setup is Quick Start, and occurs automatically the first time you turn on the unit.
The second type of setup is one you can initiate at any time by pressing the SETUP button on your
Chapter 1: Connections and Setup Completing Quick Start
Quick Start is a setup procedure that occurs automatically the first time you turn on the
unit. You must be connected to the Internet to complete Quick Start. It is a required
procedure which presents a series of screens and menus that enable the Music Jukebox
to perform the following:
• get additional information (CD cover art, music information)
• configure Internet Radio stations f
Chapter 1: Connections and Setup Ethernet IP Addressing
If you are using an Ethernet connection, choose what kind of Internet Protocol Address
your ISP supplies, and press OK/SELECT. If you don’t know, choose dynamic.
Highlight next and press OK/SELECT to continue to the next screen.
Tip: If you’re not familiar with IP addressing, we recommend you choose dynamic for
this setting. All your IP addressing information will be gathered from y
Chapter 1: Connections and Setup Testing the Ethernet Connection
After your enter your Ethernet settings and access information, a connection test screen
appears. Highlight test connection and press OK/SELECT. The test results are displayed. If
you experience any problems, see below for more information.
Highlight return, and press OK/SELECT to continue.
Zip Code
Important: You must enter a valid zip code for your location.
The Music Jukebox