Siemens Milltronics BW500 Operating Lnstructions

����������� ����������� ����������������������������� �������������������������������� ...

Safety Guidelines: Warning notices must be observed to ensure personal safety as well as that of others, and to protect the product and the connected equipment. These warning notices are accompanied by a clarification of the level of caution to be observed. Qualified Personnel: This device/system may only be set up and operated in conjunc ...

Table of Contents Safety Notes .............................................................................................................................................1 The Manual ...............................................................................................................................................1 Technical ...

PROGRAM Mode Display .........................................................................................................29 To enter PROGRAM mode: .......................................................................................................29 RUN Mode ........................................................................ ...

Setup and Tuning ...................................................................................................................................74 Proportional Control (Gain), P ..................................................................................................74 Integral Control (Automatic Reset), I ................. ...

Proportional Integral Derivative (PID) Control Parameters (P400 – P419) ............................130 Batch Control (P560 – P568) ..............................................................................................................134 Totalization (P619 - P648) .............................................................. ...

Page 1 Introduction Safety Notes Special attention must be paid to warnings and notes highlighted from the rest of the text by grey boxes. The Manual This instruction manual covers the operation, installation, and maintenance of Milltronics BW500 and BW500/L. Please refer to this manual for p ...

7ML19985DK05 Introduction Technical Support Support is available 24 hours a day. To find your local Siemens Automation Office address, phone number and fax number go to: www.siemens.com/automation/partner • Click on the tab Contacts by Product then find your product group (+Process Automation > ...

Page 3 Introduction Milltronics BW500 and BW500/L Milltronics BW500 The Milltronics BW500 is a full-featured integrator for use with belt scales and weighfeeders. The speed and load signals from the conveyor and scale, respectively, are processed to derive rate of material flow, and totalizat ...

7ML19985DK05 Introduction Individual port configuration for: • Dolphin Plus • Modbus ASCII • Modbus RTU • Printer • SmartLinx®compatible Controls and operation functions BW500 BW500/L load linearization T T auto zero T T PID controla) a) The optional mA I/O board is required for 3 outpu ...