Yamaha CL5 Reference Manual

The CL5/CL3/CL1 Reference Manual (this document) allows you to search for terms and take advantage of links in the text. Searching for terms To search for a term, use the search function of the software you're using to view this document. If you're using Adobe Reader, enter the term in the search box and press the key of your computer keyboard to search for occurrences of that term. Reference Manual Displaying the n ...

2 Reference Manual Table of contents How to Use This Reference Manual ...................................................................................... 1 Function Tree .............................................................................. 4 SELECTED CHANNEL section ........................................................ 6 Operations in the SELECTED CHANNEL Section ............................................................. ...

3 Reference Manual Using the Premium Rack .............................................................................................. 144 Using the graphic EQ, parametric EQ, effect, and Premium Rack libraries ............... 153 I/O devices and external head amps ...................................... 154 Using an I/O device ...................................................................................................... 154 Remo ...

Owner's Manual(booklet). Main SELECTED CHANNEL 6 OVERVIEW 13 FUNCTION ACCESS AREA (18) SETUP USER SETUP 186 PREFERENCE 195 USER DEFINED KEYS SETUP 197 USER DEFINED KEY SETUP (List) 197 USER DEFINED KNOBS SETUP 203 USER DEFINED KNOB SETUP (List) 203 ASSIGNABLE ENCODER SETUP 206 CUSTOM FADER BANK/MASTER FADER 209 FADER ASSIGN SELECT 208 USER LEVEL/CREAT ...

245 INITIALIZE CURRENT MEMORIES 245 TOUCH SCREEN CALIBRATION 245 INPUT PORT TRIM 247 OUTPUT PORT TRIM 247 SLOT OUTPUT TRIM 247 FADER CALIBRATION 246 LED COLOR CALIBRATION 248 NOTE • The explanations in this reference manual will use the CL5. • In the case of the CL3/CL1, some screens will not show channels and faders that do not exist on those models. CH JOB CH LINK M ...

SELECTED CHANNEL section The SELECTED CHANNEL section located at the left of the display corresponds to a channel module of a conventional analog mixer, and allows you to use the knobs on the panel to set all the major parameters of the currently-selected channel. Operations in this section will affect the channel that was most recently selected by its [SEL] key. If you have assigned an ST IN channel or STEREO ch ...

SELECTED CHANNEL VIEW screen ◆ SEND field In this field, you can view the send level and pre/post from the channel to each MIX/MATRIX bus. You can also switch the on/off status of the send signals. The view and the function of the knobs and buttons in the SEND field vary depending on whether a pair of bus channels (odd-numbered and even-numbered) are comprised of two mono channels or a stereo channel. 1 Tabs En ...

◆ GAIN/PATCH field This field enables you to make HA (head amp) analog or digital gain settings. You can also view the operational status of the head amp. ◆ PAN/BALANCE field This field enables you to switch the on/off status of the signal sent from the selected channel to the STEREO/MONO bus, and adjust the pan and balance. 1 GAIN knob Sets the analog gain/digital gain of the head amp. Press the knob to open ...

When using Surround mode (MIX1- MIX6) 3 DOWN MIX This field enables you to view the downmix 3 coefficient and L/R button settings. Press this field to open the TO STEREO/MONO window. ◆ INPUT DELAY field This field enables you to view the delay settings. 1 1 ON indicator Indicates the on/off status of the delay. 2 2 Delay time The delay value is displayed by milliseconds (ms) and also by currently-selected sca ...

10 Reference Manual ◆ EQ graph field This field graphically indicates the approximate response of the EQ. Press this field to open the HPF/EQ 1ch window, in which you can set the attenuator, HPF, and EQ. ◆ DYNAMICS1/DYNAMICS2 field This field enables you to set the Dynamics 1/2 parameters. 1 2 3 4 1 OVER indicator Warns you when the signal is clipping. 2 Level meter Displays the output signal level (green) and the amount of gai ...

11 Reference Manual ◆ FADER field This field enables you to make settings for the channel on/off status and the level. 1 Fader Displays the current level. Use the faders on the top panel to set the levels. 1 2 Level indicator Displays the current level setting by numerical value. If When the mute group tab is selected: 4 Mute group select buttons 2 Select the mute group to which the channel is assigned. 5 NOTE If the dimmer lev ...

control a set of eight input channels, output channels, or DCA groups. If you press one of the Bank Select keys, the channels or DCA groups corresponding to that key will be assigned to the Centralogic section, and can be controlled using the faders, [ON] keys, and [CUE] keys in the Centralogic section. Opera ...

This field appears at the top and bottom of the screen and displays the channel number, name, and icon for the currently-selected eight channels. The name of the currently-selected channel is highlighted. : Selected channel : Unselected channel NOTE If you have retained a specific channel (that is controlled by the faders or knobs in the Centralogic section) by pressing and ho ...

The slot name will appear. If the rack is connected: The patch and module name will appear. If the output is connected: Only the patch will appear. ◆ INPUT DELAY field (input channels only) This field displays the delay status for the input channel. Press this field to open the INPUT DELAY 8ch window. 1 1 DELAY ON/OFF indicator Indicates the on/off status of the delay. ◆ INSERT/DIRECT OUT ...

The SEND ON/OFF button for each bus is shown instead of the knob. ◆ TO STEREO/MONO field This field displays the on/off status and pan/balance setting of the signal sent to the STEREO/ MONO bus. This field varies depending on the type of the selected channel. When an input channel or MIX channel is selected: 2 1 TO STEREO PAN knob Sets the pan position of a signal routed to ...

Input and output patching This chapter explains how to edit the input patching and output patching, how to connect inserts, and how to use direct outputs. When the CL series is in the initial state, the following input ports (jacks/ports) are patched to each input channel. For CL5 Input channels Input port (jack/port) CH1-48 DANTE1-48 CH49-64 DANTE49-64 CH65-72 OMNI1-8 ST IN 1L-8R FX 1L(A)-FX 8R(B) For CL3 For ...

Input patching Changing the input patching CL series consoles and I/O devices feature two types of patching: Dante audio network patching and CL console internal patching. For Dante audio network patching, you will use the DANTE INPUT PATCH window. In this window, you can patch the CL console and I/O device inputs. Sixty-four (64) channels can be input from a Dante audio network to a CL series console. You can ...

PATCH/NAME screen 2 3 7 1 5 4 • PREMIUM RACK ...PR1L(A) - PR2R(B) 5 Port select buttons Select the input port that is assigned to the currently-selected channel. 6 Tabs Enable you to switch between items. 7 Close button Closes the screen. Changing the output patching To change the patching, you can either select the output port that will be the output destination of each output channel, or you can select the ...

PATCH/NAME screen 3 4 5 9 1 2 7 6 8 7 Port select buttons From the category, these buttons let you select the port to patch. To cancel the selection, press the button once again. 8 Tabs Enable you to switch between items. 9 Close button Closes the screen. Selecting the output channel for each output port STEP 1. In the Function Access Area, press the SETUP button. 2. Press the OUTPUT PORT button in the SYSTE ...

20 Reference Manual CH SELECT screen Inserting an external device into a channel You can insert an effect processor or other external device into the signal path of an INPUT, MIX, MATRIX, STEREO, or MONO channel. When doing so, the type of input/output port used for the insertion and the location of the insertion in/out can be specified individually for each channel. STEP 1. Connect your external equipment to an OMNI IN/OUT jack ...