Wiseup WIFI33 Operation & User’s Manual

1. Antenna 2. Electrode 3. Battery Life LEDs 4. Power Switch 5. Reset Button 6. Power Input 7. Indicator Light 8. Camera Lens 9. IR LEDs ...

-1× WIFI Camera Toy Car -1× DC5V Power Adapter -1× Charging Base III. Getting Started 3.1. Please make sure your toy car camera is fully recharged before using. 3.2. Scan the QR code below to install the “CloudRover4” application on your Android or IOS device. 3.3. Slide the Power Switch to the ON position to turn on the camera ...

car icon, input default password “admin” and tap “Connect” to connect to the camera. 4.1.3. It will take a moment to enter into the live video page. Now P2P (LAN) mode is complete and you can view video locally, within 15 meters (49 feet) open range. Check the ...

>> Before remote view setup, please make sure that the camera is successfully added to the APP in P2P (LAN) mode. 4.2.1. Launch the “CloudRover4” APP. 4.2.2. Click “Configure the Cloud Companion”. On the next page, select a desirable WIFI hotspot to enroll the camera in and then tap “Next”. 4.2.3. When the config ...

the WIFI settings page. 2). If the remote view setup failed and you need to reset the camera (See VI) and set up all over again. V. Motion Detection & Continuous Video Recording >> Before motion detection setup, please make sure that the camera is ...

Recording” mode. The camera will start recording video continuously to the internal memory. You can follow 5.3. to check out the video clips. VI. Resetting to Factory Default If the camera fails to login or doesn’t work properly, a quick reset will restore it back ...

>> Before changing password, please make sure that the camera is online in the application. 7.1. Launch the application and login the camera. 7.2. Go to the live video page, then click the gear icon. On the settings page, locate “Change password” section and then input a new password. Next time you login the camera, please enter th ...

3. Keep your phone or mobile device within the camera’s WIFI hotspot range, refreshing the WIFI signal page. It may take up to 2 minutes for the hotspot to become recognizable on your phone or mobile device's WIFI setting page. 4. Shut off your phone or mobile device’s WIFI functi ...

4. Netzschalter 5. Reset-Taste 6. Leistungsaufnahme 7. Kontrollleuchte 8. Kameraobjektiv 9. IR-LEDs ...

-1 × WIFI Kamera Spielzeugauto -1 × DC5V Netzteil -1 × Ladestation III. Anfangen 3.1. Bitte stellen Sie sicher, dass Ihre Spielzeugauto-Kamera vor der Benutzung vollständig aufgeladen ist. 3.2 Scannen Sie den QR-Code unten, um die "CloudRover4" -Anwendung auf Ihrem Android- oder IOS-Gerät zu installieren. 3.3. Schieben Sie den Net ...