Genius 502 Manual 

1.2 System Requirements External View Key Function Button Play / Pause / Up Button Flash / Right Button Voice Memo / Up Button Self- timer / Left Button OK / Menu Button Down/Exposure/ Delete Button 1.3 Overall Introduction Windows 2000 Professional(SP4) / Windows ME / Windows XP (SP2) / Window Vista Minimum 64MB RAM (XP:128MB) USB port(1.1 or 2.0 Standard interface). CD-ROM drive For Windows Specifications are subject to change without prior notice. Image Type Sensor Effective Pixels Total Pixels Lens Focal Length F No. Digital Zoom LCD Display Focus Range Range Shutter Type Speed Exposure Control ISO Equivalent Flash Modes Range White Balance Sharpness Effect Shooting Still Image Image Quality Scence Mode Movie Clip Voice Recording PC Cam Selftimer Storage Mdeia File Format Image Size Image Play Interface Power Source Dimensions (WxHxD) Weight Software Application 5M 1/2.5" CMOS Sensor Approx. 5.03 Mega Pixels Approx. 5.51 Mega Pixels f=7.12mm F3.2 Still Image mode : 1X ~ 8X Play mode : 1X ~8X (depends in image size) 2.4" color LCD 112K dots Macro: 20cm, Normal : 1.2m ~ infinity Electrical shutter Normal: 1/4 sec. - 1/8000 sec., Night Sense: 4 sec. 1/8 sec. Programmed AE Auto Auto Flash, Fill-in flash, Flash off(Recharging Time Approx 5 sec.) Working Range 1.0 ~ 2.0m Auto, Daylight, Cloudy, Tungsten, Fluorescent Soft, Normal, Hard Standard, Vivid, Sepia, B & W Single Image, Continuous Shooting(VGA, 3M, 5M with 3 shots) Super Fine, Fine, Normal Auto, Sport, Night Portrait, Landscape, Backlight Size support: 320x240(QVGA), 640x480 (VGA) Quality support: 20 fps and 15fps Digital Zoom: 1X ~ 8X Yes Voice Memo in Still Image (max. 10 sec.), supports pause/resume recording Yes 10 sec., 2 sec. Internal flash memory: 16MB (Approx. 13.8MB available for image storage) External memory: supporting SD Card Still Image: JPEG(DCF), EXIF 2.2, DPOF 1.1, PictBrdge 1.0 Movie Clip: MJPEG. 320x240 (QVGA). 640x480(VGA), with audio 12M Via Interpolation: 4032x3024, 5M: 2560x1920, 3M: 2048x1536, VGA:640x480 Single image, Thumbnails, Slide show, Movie Clip Digital output connector: USB 1.1 TV output: N/A MIC input: Yes; Buzzer out(no speaker) 2 x AA alkaline, Ni-MH Battery 87.8x60.8 x24.5mm (29.9mm at the tickest part) Approx. 86g(batteries and card exclusive) Storage Driver(Win2000, WinMe, WinXP, Vista32/64

( )Battery Half Drained ( )Battery Drained Working Mode ( )Image Mode Shooting ( )Movie Clip Mode ( )Voice Recording Mode 1 2 Flash Mode ( )Auto Flash ( ) ( )Flash Off Fill-in Flash 4 Self-timer ( )10 Seconds ( ) 2 Seconds 2S 5 33 ( )Playback Mode 16 ( ) Voice Memo Focus Range ( ) Macro 6 7 100 1 2 4 5 6 5M 3 11 12 13 7 X1.2 W. Balance ( )Auto ( )Daylight ( )Cloudy ( )Tungsten ( )Fluorescent 14 13 15 9 10 14 15 16 10 12 8 9 11 1.4 Explanation of the status icons Icon Display 1 2 5M 14 4 3 5 6 Blinking 2.1 Loading the Batteries 2.2 Inserting Memory Card 2.3 Taking Basic Photograph 1. Power off the camera. 2. Slide out battery chamber cover to open it. 3. Load 2 x AA batteries into the battery chamber, following the polarity indications. 4. Close the battery chamber cover. 1.Power off the camera. 2.Open the card slot cover, and insert the card in the card slot. 3.Insert the memory card into the card slot and press it down until a click sound happens 4.Close the card slot cover. 1. Press down the POWER button to turn on the camera. 2. Press the mode button to Image Shooting Mode ( ) for still image, Movie Clip Mode ( ) for video recording, or Voice Recording Mode ( ) for voice recording. 3. With TELE/WIDE Button, you can have 8X digital zoom for zooming in and out. 4. Press the shutter button fully down to capture an image. 5. The LED Indicator starts blinking right after the Shutter Button is released. Once the LED Indicator stops blinking, you are ready to take another shot. 6. Or you can press Playback Button ( ) to review the images or movie you just took. Note:Hold your camera with your hands and position a subject in the center of the frame to focus on. clips Using The Camera Exposure - 2 + ( ) Memory Card Inserted ( ) Available Shots (100) Digital Zoom ( ) 8.0X Zoom Status Indicator ( ) WARNING: Holding Camera Stable Size 12M (Via interpolation) 5M 3M VGA Sharpness ( )Soft ( )Normal ( )Hard Quality ( )S. Fine ( )Fine ( )Normal 8 Continuous Single ( ) Shooting + Positive - Negative

TELE/WIDE Button(Continuous Digital Zoom 8X) 3.1 Under Image Shooting Mode( ) The zoom Indicator, appearing on the top of the LCD Monitor, shows the current digital zoom status. Auto Flash Fill-in Flash Flash Off The flash fires automatically as required under shooting mode. Suggestion for getting a good exposure picture when using Flash: The camera should keep 1.5~2 meters form the object you're ready to capture. This m ircumstances. The mode will disable the flash to fire in any circumstances. ode will enable the flash to fire in any c 100 VGA Self-timer Button When you take a shot of a very close-up of object within the distance of 20 cm, please push the Focus switch up to begin with the Macro function and the Macro icon ( ) will also appear on the LCD Monitor for notice. By pressing down the Flash/Right Button in order, you may select different flash options as follows: Flash Button 100 100 99 2S Voice Memo Button Focus Switch With the 10 sec. Self-timer: With the 2 sec. Self-timer: The image will be taken after an interval of 10 seconds once the Shutter Button ( ) is released. The image will be taken after an interval of 2 seconds once the Shutter Button ( ) is released. You can have two ways to put the voice memo onto the images. In Image Shooting Mode: In Playback Mode: 1. When the Voice Memo Button is pressed down, the Voice Memo icon ( ) will show up on the LTPS LCD Monitor. 2. Press down the Shutter Button to take a picture. 3. Then you can record a voice right after the image is taken. 1. Press down the Voice Memo Button and you can see the VOICE MEMO icon ( ) showing on the LCD Monitor. 2. Press down the Shutter Button to record a voice memo. 3. Press down the Shutter Button to finish the voice memo. Exposure / Delete Button In Image Shooting Mode: Night Scene Under Shooting Mode: In Playback Mode: BY pressing down (delete) button of 5 function keys, you can easily adjust the value of the exposure by left / right button from+2.0EV to-2.0EV(at 0.3EV increments). By pressing down the Delete / +/- button, you can use left/right button to adjust the value of the Long time shutter, which is ranged from AUTO, 1/8, 1/4, 1/2, 1, 2, 3, 4 by pressing down(delete) button again to make sure your selecting. Deleting the single image can be done by pressing down this button and OK Button. 100 VGA Shooting Mode Night Mode Playback Mode Operation Steps Operation Steps Operation Steps VGA VGA 100 VGA 0.0EV Delete Back Set : OK Execute 100 VGA AUTO LT

Still Image Mode & Movie Mode Video White Balance Setting (Default:AUTO) Still Image Mode & Movie Mode Operation Steps 1. MENU 2. or 3. 4. OK or 5. Effect Back Set : OK Standard Vivid Sepia B&W No effect is added to the picture. Turn the image into vivid color saturation. Turn the image into yellowish brown. Turn the image into black and white. Operation Steps 1. MENU 2. or 3. 4. OK or 5. The White Balance options are provided as follows: Auto Adjusting the white balance automatically Daylight Under the strong light environment Fluorescent Under the fluorescent light environment Cloudy Under the cloudy light environment Tungsten Under the tungsten light environment 3.2 Under Voice Recording Mode( ) Operation Steps 1. MENU 2. or 3. 4. OK or 5. 00:53:13 STANDBY START : SH 00 : 00 : 00 This function allows you to record sound as a tape recorder once the shutter button is pressed down. The length of the recording time depends on the available memory capacity. Note: You can connect camera with other audio player or PC by USB cable to play and check the voice recording file. 3.3 Under Play back Mode( ) Please press Playback Button to view the images taken. Press the Right or Left Button to go to or back to the next or last image. The icon ( ) shows up when viewing still image comes with a voice memo. Note: Playback of Still Image 100-0021 Operation Steps 1. Playback Button 2. or Playback of Movie Clip 100-0021 Operation Steps 1. Playback Button 2. or Press Playback Button to play the movie clips. Press the Up Button to play or pause the movie clip. Note:The icon ( ) on the left of the LCD Monitor represents a Movie clip, not a still image. Thumbnail Display(Small Images) 100-0021 100-0002 Standard ViVid Sepia B & W W. Balance Back Set : OK Auto Daylight Cloudy Tungsten Fluorescent Thumbnail Display is a convenient tool for you to find the image you took from the list. You can press WIDE Button to have Thumbnail Display.

100-0021 100-0021 100-0021 1. Press down the TELE Button and you can see the enlargement of the image. 2. Use the TELE/WIDE Button to zoom in or to zoom out. 3. Use the UP/DOWN/LEFT/RIGHT Button to locate the position you would like to review. 4. Press down the WIDE Button to return to the original Playback Mode. Operation Steps 1. MENU 2. or 3. 4. OK or 5. Setting Image Protection Deleting all Image This function allows you to prevent your specific images from being deleted if the "LOCK" under "PROTECT" list is selected. Conversely, you can select " ancel" to cancel the protection. C Operation Steps 1. MENU 2. or 3. 4. OK or 5. You can delete selected images and all images once with this function. Operation Steps 1. MENU 2. or 3. 4. OK or 5. Copy to Card This function allows you to put all images stored in the internal memory into the memory card. DPOF-STANDARD This option allows you to put the print quantity (MAX. 30 pcs) on your memory card. [SINGLE] - specifies the number of copies for a selected image and you can press LEFT/RIGHT Button to go to next image. [ALL] - specifies the number of copies for all pictures apart from movie clips and voice recording files. Note: You cannot see the "PRINT" function on the LTPS LCD Monitor if a memory card is not inserted. 3.4 Under Movie Clip Mode( ) Video Size Setting The video size options are provided as follows: VGA / QVGA Protect Back Set : OK Single All Select Delete Back Set : OK Single All Select Copy To Card Back Set : OK Cancel Execute Operation Steps 1. MENU 2. or 3. 4. OK or 5. Menu Back Set : OK Size VGA W.Balance Auto Setup Next Menu VGA QVGA DPOF Back Set : OK SINGLE ALL Single Back Set : OK Print Nun Print Print Enable Back Set : OK Cancel Execute Operation Steps 1. MENU 2. or 3. 4.OK Operation Steps Operation Steps 1. or 2.OK 1. or 2.OK X 1.6 X 1.6 0

once having been operated for the timeinternal you set. This setting helps avoid some unnecessary power consumption. Language 1.English 2.French 3.German 4.Italian 5.Spanish 6.Portuguese 7.Traditional Chinese 8.Simplified Chinese 9.Japanese 10.Thai 11.Turkish 12. Russian Format This function allows you to format the memory card and internal flash memory easily. Date Input You can press Up key to make Date Type settings. 1. YY/MM/DD 2. MM/DD/YY 3. DD/MM/YY Operation Steps Operation Steps 1. MENU 2. or 3. 4. OK or 5. 1. MENU 2. or 3. 4. OK or 5. Setup Setup Back Set : OK Back Set : OK Auto 3.Min. Language English Format Net Menu Date Input Net Menu Imprint off Auto 3.Min. Language English Format Net Menu Date Input Net Menu Imprint off 1 Min. 3 Min. 5 Min. Off English Francais Deutsch Operation Steps 1. MENU 2. or 3. 4. OK or 5. Setup Back Set : OK Auto 3.Min. Language English Format Net Menu Date Input Net Menu Imprint off Cancel Execute Operation Steps 1. MENU 2. or 3. 4. OK or 5. Setup Back Set : OK Auto 3.Min. Language English Format Net Menu Date Input Net Menu Imprint off Off Set Imprint This option allows you to print out the images with date. Beep This option allows you to switch on/off button sound. Light Freq. The Light Frequency setting is for Anti-flicker. 50Hz: UK, Germany, Italy, Spain, France, Netherlands, China, Japan, Portugal. 60Hz: U.S.A., Taiwan, Korea, Japan. Operation Steps Operation Steps 1. MENU 2. or 3. 4. OK or 5. 1. MENU 2. or 3. 4. OK or 5. Setup Back Set : OK Auto 3.Min. Language English Format Net Menu Date Input Net Menu Imprint off Off Date Only Date & Time Operation Steps 1. MENU 2. or 3. 4. OK or 5. Setup Back Set : OK Beep On Light Freq. 60Hz Q.View On Sys. Reset Net Menu USB Printer Setup Back Set : OK Beep On Light Freq. 60Hz Q.View On Sys. Reset Net Menu USB Printer On Off 6OHz 50Hz YYYY/MM/DD 2008/01/01 03:38:43 3.5 SETUP Settings Note: 1.Auto Off 2.Language 3.Format 4.Date Input 5.Imprint 6.Beep 7.Light Freq. 8.Q. View 9.Sys. Reset 10.USB Operation Steps 1. MENU 2. or 3. 4. OK or 5. Setup Back Set : OK Beep On Light Freq. 60Hz Q.View On Sys. Reset Net Menu USB Printer Setup Back Set : OK Auto 3.Min. Language English Format Net Menu Date Input Net Menu Imprint off Note: If select wrong frequency, the pictures will appear some horizontal flicker in artificial light source environment.

of recalling all default values except the Date, Time and Language. USB With the connection of the Printer, the PC Cam and Disk Drive, you have to select the right function and connect to right device. (1) PC Cam: a. Please install the PC Cam Driver on your computer. b. Select your USB setting as PC Cam. c. You can start PC Cam function after you set up the MSN messenger or AMCAP. (2) Disk Drive: When selecting Disk Drive, you can have a new movable disk for downloading your photos on your PC. (3) Printer: With the connection of the printer supporting PictBrdge function, you can select the detailed options of printer. Operation Steps Operation Steps 1. MENU 2. or 3. 4. OK or 5. 1. MENU 2. or 3. 4. OK or 5. Setup Back Set : OK Beep On Light Freq. 60Hz Q.View On Sys. Reset Net Menu USB Printer Setup Back Set : OK Beep On Light Freq. 60Hz Q.View On Sys. Reset Net Menu USB Printer Cancel Execute PC Cam Disk Drive Printer Printer Connection (PictBridge Mode) Connecting the Camera to a PictBridge-supported Printer If the printer you have supports the interface of PictBridge, then you can have your camera connected with the printer by the supplied USB cable to have the stored images print out directly. 1. Have both of the camera and the printer power on. 2. Press the MENU Button to go to SETUP Mode. 3. Go to USB and select PRINTER for printer connection. 4. Use the supplied USB cable to connect the camera to the PictBridge-supported printer as shown above Select pictures to print Operation Steps 1. or 2.OK PictBridge Back Set : OK Images Next Menu Size Default Layout Default Print Images Back Set : OK Select Next Menu All Next Menu Select Back Set : OK Print Num 00 Q. View If Q.View is on, you can view the image you just captured on the LCD Monitor. [OFF]: You cannot view the picture you just took on the LCD Monitor. Operation Steps 1. MENU 2. or 3. 4. OK or 5. Setup Back Set : OK Beep On Light Freq. 60Hz Q.View On Sys. Reset Net Menu USB Printer On Off

pictures. Operation Steps 1. or 2.OK PictBridge Back Set : OK Images Next Menu Size Default Layout Default Print PictBridge Back Set : OK Images Next Menu Size Default Layout Default Print PictBridge Back Set : OK Images Next Menu Size Default Layout Default Print Default L Format 2L Format Default 2UP 4UP Index Borderless SIZE LAYOUT Setting the size of the printing paper. It will show the size formats your printer supports. Setting the number of pictures to be printed on a sheet of paper [SELECT]: The PictBridge function will be applied only to the picture currently displayed. [ALL PICS]: The PictBridge function will be applied to all pictures 1.Select [SELECT] or [ALL PICS]. A screen where you can set the number of copies to print will appear as shown above. 2.Press the Up/Down Button to select the number of prints. Maximum 30 prints. 3.Use the Left/Right Button to select another picture and select the number of prints for another picture. 4.After setting the number of prints, press the OK Button to save. 5.Press the Shutter Button to return to the menu without setting the number of prints. Setting the Number of Copies to Print . ArcSoft MediaImpression™manages your media for you, and gives you tons of fun and exciting ways to create and share projects featuring your photo and video files. Create your own movies or photo slide shows, edit, enhance, and add fun creative effects to your photos; and share your files easily through simple email attachments or popular photo printing and video sharing websites. If you have question regarding ArcSoft software, please visit ArcSoft's website as following: http://www.arcsoft.com/en/support/index.asp