Retrotec DM32 Manual 

red “ref” ports [Channel B] ….across green “input” and yellow “ref” ports Tap in the boxes on the touch sensitive Home screen Control fan speed Computer connection with Ethernet cable Fan speed, time average, network and battery status On for charging, off when charged QuickGuide DM32 Dual-Channel Digital Gauge Recharge using micro- USB to USB cable Made in Everson, WA USA QG160 Page 1 of 4 2013-04-15 On/Off and Home Select Device and Range Get latest updates online Set to any pressure Dimensions eliminate calculations Baseline being subtracted actoolsupply.com actoolsu ...

Retrotec US1311 Blower Door System Retrotec US1211 Blower Door System Retrotec US1112 Blower Door System Retrotec US1111 Blower Door System Retrotec US1102 Blower Door System Retrotec US1101 Blower Door System Retrotec US1212 Blower Door System ...

Plug in color- coded tubes Connect ethernet-style Cable from gauge to fan 1: Make connections and power On 3: Choose desired Result 2: Set Range or Device Tap for options Tap Tap to return Home Tap for more choices to see Device options Press for 2 seconds to turn On /Off Tap to change units Tap for previous screen Tap for more Tap to select Device Tap to select and return Home Tap to select Range OR Page 2 of 4 Tap to select Result actoolsupply.com actoolsupply.com ...

to set to a speed Tap to “Hold”, Tap to release OR Tap to turn fan Off c a b 5: Run a test Tap to change Result to decrease or increase c Tap to calculate Result exactly at (@) the “Set Pressure” 4: Set Area and Volume Tap and [Set] volume for: Tap and [Set] area for: Flow/Area EqLA10/Area EfLA4/Area Tap Tap Tap or a b e d c to remove @ d e Page 3 of 4 ACH (Air Changes per Hour) Tap Tap actoolsupply.com actoolsupply.com ...

tap [Mode] and select “Static “. For 2nd gauge enter IP Address: 169.254.1.2 For 3rd gauge enter IP Address: 169.254.1.3 …… Tap [Capture Baseline] to begin sampling Tap [End Capture] after 15 to 60 seconds The displayed Baseline pressure is subtracted from all future [Channel A] readings. Tap [Settings]>>[Baseline] >>[Clear Baseline] to remove. Tap [Network] Shows connection information. [Default @ Pressure] Adjust the pressure to which results are extrapolated. [Power down time] Enter time, “Off” means never. [Sound] On or off. [Ducts=0.6, House=0.65] Enter “n” for ducts or house. [Settings] allo ...