ProForm 831.297470 Operation & User’s Manual
Text of ProForm 831.297470 Operation & User’s Manual
Model No. 831.297470
Serial No.
Write the serial number in the space
above for future reference.
SEARS, ROEBUCK AND CO., HOFFMAN ESTATES, IL 60179
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
ProForm 831.297470 TABLE OF CONTENTS
FULL 90 DAY WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1. It is the responsibility of the owner to
ensure that all users of the CROSSTRAINER
are adequately informed of all warnings and
precautions.
2. Use the CROSSTRAINER only as described
in this manual.
3. Place the CROSSTRAINER on a level
surface, with eight feet of clearance behind
it. Do not place the CROSSTRAINER on a
surface that blocks any air openings. To
protect the floor or carpet from damage,
place a mat under the CROSSTRAINER.
4. Keep the CROSST
ProForm 831.297470 22. The CROSSTRAINER includes three pairs of
hand weights. Other hand-held weights may
be used with the CROSSTRAINER; however,
do not put other weights on the weight rack,
or use weights weighing more than 20
pounds each.
23. Before moving the CROSSTRAINER, make
sure that the bench and treadmill are folded
to the storage position, and that the lock
pins are fully engaged (see HOW TO FOLD
THE TREADMILL TO THE STORAGE POSI-
TION on page 11, and HOW TO FOLD
Congratulations for purchasing the revolutionary
PROFORM® CROSSTRAINER. The unique
CROSSTRAINER offers both aerobic exercise and
strength training exercise to help you achieve total
fitness in the convenience of your home. And when
you’re not exercising, the CROSSTRAINER can be
folded up, taking a fraction of the space needed for
both a treadmill and a bench.
For your benefit, read this manual and view the
included videocassette before using the CROSS
Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed. Assembly requires a phillips screwdriver
(not included).
1.
With the help of a second person, carefully raise the
Uprights (102) until the CROSSTRAINER is in the posi-
tion shown at the right.
2.
Locate the Left Weight Rack (82), which can be identi-
fied by the hole near the top
Put a 2-lb. Weight (79) on the upper hooks on the Right
Weight Rack (99). Put a 4-lb. Weight (80) on the center
hooks on the Right Weight Rack. Put a 6-lb. Weight
(81) on the lower hooks on the Right Weight Rack.
Put the remaining Weights on the Left Weight Rack
(not shown).
5.
Remove the backing from the Adhesive Clip (129).
Press the Adhesive Clip onto the base of the Uprights
(102) in the indicated location. Press the Allen Wrench
(116) into the Ad
HOW TO OPERATE THE TREADMILL
HOW TO PLUG IN THE POWER CORD
The CROSSTRAINER, like any other type of sophisti-
cated electronic equipment, can be seriously dam-
aged by sudden voltage changes in your home’s
power. Voltage surges, spikes, and noise interference
can result from weather conditions or from other appli-
ances being turned on or off. To decrease the possi-
bility of the CROSSTRAINER being damaged,
always use a surge suppressor (see drawing 1
ProForm 831.297470 HOW TO LOWER THE TREADMILL FOR USE
To use the treadmill, the bench must be folded to the
storage position. See HOW TO FOLD THE BENCH
TO THE STORAGE POSITION on page 14.
Caution: You must be able to safely lift 45 pounds
(20 kg) in order to lower the treadmill.
To lower the
treadmill, hold
the upper end
of the treadmill
with your right
hand as shown.
Hold the tread-
mill knob with
your left hand
and pull it to
the left. Pivot
the treadmill
down a few
inch
DIAGRAM OF THE CONSOLE
Clip
Key
Speed Control
Monitor Displays
LED Track
STEP BY STEP CONSOLE OPERATION
Step onto the foot rails of the treadmill. Find the clip
attached to the key (see the drawing above), and slide
the clip onto the waistband of your clothing. Follow the
steps below and on page 11 to operate the console.
Insert the key fully into the power switch.
When the key is in-
serted, the first indi-
cator in the LED track
will light. The four dis-
Follow your progress with the LED track and the
four monitor displays.
The LED
Track—The
LED track in the
center of the
console repre-
sent a distance
of 1/4 mile. As
you exercise,
the indicators
around the track will light one at a time until you have
completed 1/4 mile. The first indicator above the
word START will then light and another lap will begin.
The TIME display—
This display shows the
total time that you have
walked or run on the
treadmill.
HOW TO EXERCISE ON THE TREADMILL
The following guidelines will help you to plan your ex-
ercise program. Remember—these are general guide-
lines only. For more information, view the included
videocassette.
EXERCISE INTENSITY
Whether your goal is to burn fat or to strengthen your
cardiovascular system, the key to achieving the de-
sired results is to exercise with the proper intensity.
The proper intensity level can be found by using your
heart rate as a
Training Zone Exercise
After warming up, increase the intensity of your exer-
cise until your heart rate is in your training zone for 20
to 60 minutes. (During the first few weeks of your exer-
cise program, do not keep your heart rate in your train-
ing zone for longer than 20 minutes.) Breathe regularly
and deeply as you exercise—do not hold your breath.
A Cool-down
Finish each workout with 5 to 8 minutes of stretching
to cool down. This will increase
HOW TO LOWER THE BENCH FOR USE
To use the bench, the treadmill must be folded to the
storage position. See HOW TO FOLD THE TREAD-
MILL TO THE STORAGE POSITION on page 11.
To lower the
bench, first
hold the end of
the bench as
shown—do not
hold the leg.
Using your
right hand,
slide the bench
knob to the
right as far as
possible. Make
sure that the
knob is moved
all of the way
to the “bench”
position. Note:
It may be nec-
essary to push
on the leg w
The CROSSTRAINER offers a variety of exercises
designed to trim, tone, and strengthen the body.
Please read these guidelines before using the weight
bench. For more information, view the included video-
cassette.
WARNING: Before beginning any exercise pro-
gram, consult your physician. This is especially
important for persons over the age of 35 or per-
sons with pre-existing health problems.
STRENGTH TRAINING GUIDELINES
Your strength training program sh
MAINTENANCE AND TROUBLE-SHOOTING
Most problems can be solved by following the steps in this section. If further assistance is needed, call
our toll-free HELPLINE at 1-800-736-6879, Monday through Saturday, 7 a.m. until 7 p.m. Central Time
(excluding holidays).
PROBLEM: The power does not turn on
SOLUTION: a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor
is plugged into a properly grounded outlet (see pag
PROBLEM: The walking belt is off-center or slips when walked on
SOLUTION: a. If the walking belt has shifted to the left, first re-
move the key and UNPLUG THE POWER CORD.
Using the allen wrench, turn the left rear roller adjust-
ment bolt clockwise, and the right bolt counterclock-
wise, 1/4 of a turn each. Be careful not to overtighten
the walking belt. Plug in the power cord, insert the
key and run the treadmill for a few minutes. Repeat
until the wa