VAS 3 in 1 Flat Panel Console Assembly Manual
Text of VAS 3 in 1 Flat Panel Console Assembly Manual
Model #: XL-1
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
VAS Furniture Mfg. Inc.
Factory No. 55-12029
Page 1
3 in 1 Flat Panel Console
ADULT ASSEMBLY REQUIRED
If you have any questions regarding assembly or if you are missing parts, do not return this item to
the Retailer Store. Please call our toll free customer service number and have your instructions and
parts list ready to provide th
Model #: XL-1
Please call for replacement parts or assistance: 1-866-942-5362
VAS Furniture Mfg. Inc.
Factory No. 55-12029
Page 2
QUALITY GUARANTEE
We are confident that you will be delighted with your VAS Furniture purchase.
Should this product be defective in workmanship or materials or fail under
normal use, we will repair or replace it for up to 1 year from date of purchase.
Every VAS Furniture product is designed to meet your highest expectations
Model #: XL-1
Please call for replacement parts or assistance: 1-866-942-5362
VAS Furniture Mfg. Inc.
Factory No. 55-12029
Page 3
Parts List
Please read completely through the instructions and verify that all parts listed
are present before beginning assembly.
A-Top Frame (1)
B- Shelf Frame (1)
C- Bottom Frame (1)
D- Long Spine (1)
D1- Short Spine (1)
EL- Left Side Leg (1)
ER- Right Side Leg (1)
F- Top Glass (1)
G- Middle Glass Shelf
Model #: XL-1
Please call for replacement parts or assistance: 1-866-942-5362
VAS Furniture Mfg. Inc.
Factory No. 55-12029
Page 4
Hardware List
Please read completely through the instructions and verify that all parts listed
are present before beginning assembly.
(1)- Suction Cup (2)- 5/8” Bolt
(3)- 3/4” Bolt
(4)- 1 1/4” Bolt
(18+1 extra) (28+1 extra) (4+1 extra) (6+1 extra)
(5)-
Model #: XL-1
Please call for replacement parts or assistance: 1-866-942-5362
VAS Furniture Mfg. Inc.
Factory No. 55-12029
Page 5
Assembly Instructions
Note: Please do not fully tighten all bolts until you finish assembling all parts, then go
back and fully tighten all bolts, this will make it easier during assembly of unit.
1. Unpack the unit and confirm that you have all the hardware and required parts listed.
Note: Please decide which configuration
Model #: XL-1
Please call for replacement parts or assistance: 1-866-942-5362
VAS Furniture Mfg. Inc.
Factory No. 55-12029
Page 6
Assembly Instructions
3. Stand the unit upright.
4. Align and attach the Side Legs (EL & ER) to Bottom Frame (C), using four 1 1/4” Bolts (4)
through the bottom frame holes from inside. As shown in detail #2A.
5. Proceed to attach the Left and Right Side Legs (EL & ER) to Top and Middle Shelf
Frames (A & B), using the 5/8
Model #: XL-1
Please call for replacement parts or assistance: 1-866-942-5362
VAS Furniture Mfg. Inc.
Factory No. 55-12029
Page 7
Assembly Instructions
7. In case of uneven floor, just tilt the unit back and use your hand to turn the Floor
Levelers attached on the bottom of Side Legs (EL & ER) and adjust the height of the
unit, until the unit is level. As shown in detail #3.
Parts Required
Tools Required
Pre-attached Floor Leveler
No Tool Required
Model #: XL-1
Please call for replacement parts or assistance: 1-866-942-5362
VAS Furniture Mfg. Inc.
Factory No. 55-12029
Page 8
Option #1: CONSOLE ONLY
8. Now put the Suction Cups (1) into top holes of all Frames (A, B & C) and Left and Right
Side Leg (EL & ER) into place. As shown in detail #4.
9. Place the Glass Shelf (F, G & H) in place as shown in detail #4.
Note: Make sure that the Glass sits correctly and goes all the way into the grooves on t