Varytec LED Phantom Operation & User’s Manual

Text of the manual

2 / 7

Table of content 1. Safety instructions........................................................................................................................... 3 2. Introduction ..................................................................................................................................... 4 3. Product Overview..................

3 / 7

1. Safety instructions FOR SAFE AND EFFICIENT OPERATION Be careful with heat and extreme temperatureAvoid exposing it to direct rays of the sun or near a heating appliance. Not put it in a temperature bellow 41°F /5°C, or exceeding 95°F /35°C. Keep away from humidity, water and dust Do not place the set in a location with high humidity or lots of

4 / 7

2. Introduction - Simulated rippling water effect - 4 constantly changing dichroic colors - Stop effect on a color - Adjustable ripple speed - High-power, 22W (1,360mA) LED - Additional power output: max 100 units @ 240V 3. Product Overview 4. Setup 4.1. Fuse Replacement Disconnect the power cord before replacing a fuse and always replace with the sam

5 / 7

4.2. Mounting This fixture may be mounted in any safe position. It is important never to obstruct the fan or vents pathway. Mount the fixture using, a suitable “C” or “O” type clamp. Adjust the angle of the fixture by loosening both knobs and tilting the fixture. After finding the desired position, retighten both knobs. - When selecting an inst

7 / 7

Importeur: B & K Braun GmbH Industriestraße 1 D-76307 Karlsbad www.bkbraun.com [email protected]

Other DJ Equipment Manuals