ProForm 831.298060 Operation & User’s Manual
Text of ProForm 831.298060 Operation & User’s Manual
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
Serial Number
Decal
Model No. 831.298060
Serial No.
The serial number is found in the location
shown below. Write the serial number in
the space above for future reference.
SEARS, ROEBUCK AND CO., HOFFMAN ESTATES, IL 60179
ProForm 831.298060 TABLE OF CONTENTS
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
13. Never move the walking belt while the power
is turned off. Do not operate the treadmill if
the power cord or plug is damaged, or if the
treadmill is not working properly. (See BE-
FORE YOU BEGIN on page 4 if the treadmill
is not working properly.)
14. Never start the treadmill while you are
standing on the walking belt. Always hold
the handrails or the upper body arms while
using the treadmill.
15. The treadmill is capable of high speeds.
Adjust the
Thank you for selecting the new PROFORM¨ CROSS-
WALK JM treadmill. The CROSSWALK JM treadmill
combines advanced technology with innovative design
to let you enjoy an excellent form of cardiovascular ex-
ercise in the convenience and privacy of your home.
And when youÕre not exercising, the unique CROSS-
WALK JM can be folded up, requiring less than half the
floor space of other treadmills.
For your benefit, read this manual carefully before
using the t
Latch Screw (35)Ð2
Extension Leg Screw (53)Ð4
ASSEMBLY
Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench
and your own phillips screwdriver .
1. With the help of a second person, carefully raise the
treadmill to the upright position. As a second person tips
the trea
3. Hold one of the Handrails (1) at an angle as shown and
insert the upper end into the right Upright (11) as far as
possible. Keep the lower end of the Handrail away from
the treadmill to avoid scratching the finish.
Next, rotate the lower end of the Handrail (1) to the posi-
tion shown by the dotted line. Note: It may be necessary
to pull back on the lower end of the Handrail in order to
position the Handrail against the bracket on the
Extension Leg (34)
OPERATION AND ADJUSTMENT
THE PERFORMANT LUBETM WALKING BELT
Your treadmill features a walking belt coated with
PERFORMANT LUBETM, a high-performance lubricant.
IMPORTANT: Never apply silicone spray or other
substances to the walking belt or the walking plat-
form. Such substances will deteriorate the walking
belt and cause excessive wear.
HOW TO PLUG IN THE POWER CORD
Your treadmill, like any other type of sophisticated
electronic equipment, can be serio
ProForm 831.298060 Before operating the
console, read the following
precautions.
¥ Do not stand on the walk-
ing belt when turning on
the power.
¥ Always wear the clip (see
the drawing at the left)
while using the treadmill.
When the key is removed
from the console, the
walking belt will stop.
¥ Adjust the speed in small
increments.
¥ The training zones marked
beside the speed control
are general guidelines
only.
Insert the key fully into the power switch.
Inserting the key will
not turn on the dis-
plays. The displays will
turn on when the
ON/RESET button is
pressed or when the
walking belt is started.
Note: If you just in-
stalled batteries, the displays will already be on.
Reset the speed control.
Slide the speed control
down to the RESET
position. Note: Each
time the walking belt
is stopped, the speed
control must be
moved to the RESET
position before the
walki
ProForm 831.298060 HOW TO FOLD AND MOVE THE TREADMILL
HOW TO FOLD THE TREADMILL FOR STORAGE
Before folding the treadmill, unplug the power cord. Caution:
You must be able to safely lift 45 pounds (20 kg) in order
to raise, lower, or move the treadmill.
1. Hold the treadmill with your hands in the locations shown
at the right. To decrease the possibility of injury, bend
your legs and keep your back straight. As you raise
the treadmill, make sure to lift with your legs rather
HOW TO LOWER THE TREADMILL FOR USE
1. Hold the upper end of the treadmill with your right hand as
shown. Using your left thumb, press the storage latch and
hold it. Pivot the treadmill until the frame and foot rail are
past the storage latch.
2. Hold the treadmill firmly with both hands, and lower the
treadmill to the floor. To decrease the possibility of in-
jury, bend your legs and keep your back straight.
HOW TO MOVE THE TREADMILL
Before moving the
Most treadmill problems can be solved by following the simple steps below. Find the symptom that
applies, and follow the steps listed. If further assistance is needed, call our toll-free HELPLINE at
1-800-736-6879, Monday through Saturday, 7 a.m. until 7 p.m. Central Time (excluding holidays).
1. SYMPTOM: THE POWER DOES NOT TURN ON
a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor is plugged
5. SYMPTOM: THE WALKING BELT SLOWS WHEN WALKED ON
a. Use only a UL-listed surge protector, rated at 15 amps, with a 14-gauge cord of five feet or less in length.
b. If the walking belt is overtightened, treadmill performance may
decrease and the walking belt may be permanently damaged.
Remove the key and UNPLUG THE POWER CORD. Using the
allen wrench, turn both rear roller adjustment bolts counterclock-
wise, 1/4 of a turn. When the walking belt is properly
The following guidelines will help you to plan your ex-
ercise program. RememberÑthese are general guide-
lines only. For more detailed exercise information, ob-
tain a reputable book or consult your physician.
EXERCISE INTENSITY
Whether your goal is to burn fat or to strengthen your
cardiovascular system, the key to achieving the de-
sired results is to exercise with the proper intensity.
The proper intensity level can be found by
Training Zone Exercise
After warming up, increase the intensity of your exer-
cise until your pulse is in your training zone for 20 to
60 minutes. (During the first few weeks of your exer-
cise program, do not keep your pulse in your training
zone for longer than 20 minutes.) Breathe regularly
and deeply as you exerciseÑnever hold your breath.
A Cool-down
Finish each workout with 5 to 10 minutes of stretching
to cool down. This will increase the flexibili
PART LISTÑModel No. 831.298060
R1198A
Key No. Qty.
Description
1
2
Handrail
2
1
Key/Clip
3
11
Console Screw
4
1
Battery Cover
5
2
Foot Rail
6
4
Foot Rail Cap Screw
7
1
Left Rail Cap
8
1
Speed Potentiometer
9
1
Speed Control Knob
10*
1
Console Assembly
11
1
Upright Base
12
1
Motor Belt
13
8
Isolator Screw
14
1
Storage Latch
15
1
4Ó Cable Tie
16
2
8Ó Cable Tie
17
1
Motor Swivel Nut
18
1
Pulley/Flywheel/Fan
19
1
Motor
20*
1
Motor/Pulley/Flywheel/Fan
21
1
W
ProForm 831.298060
101
99
100
105
94
103
102
91
65
48
93
93
104
39
105
94
99
101
100
102
103
104
39
95
96
98
97
95
95
97
98
96
95
2
1
46
9
10*
34
14
35
12
17
20*
21
22
27
19
18
31
30
29
41
40
25
89
43
36
38
44
37
45
50
47
48
48
39
51
11
23
22
22
58
91
53
40
25
36
37
38
40
25
39
25
25
39
60
92
92
92
26
81
61
63
64
91
66
49
90
53
34
56
55
54
69
66
68
67
70
71
66
72 73
74
75
48
5
49
13
62
33
5
88
84
83
39
85
83
39
77
81
80
79
76
79
82
52
66
38
78
31
77
38
66
86
76
42
25
40
31
Part No. 149905 H03799-C R1198A Printed in USA © 1998 Sears, Roebuck and Co.
The model number and serial number of your PROFORM¨
CROSSWALK JM treadmill are listed on a decal attached to the
frame. See the front cover of this manual to find the location of the
decal.
All replacement parts are available for immediate purchase or
special order when you visit your nearest SEARS Service Center.
To request service or