Parker AC30V Series Technical Manual

Technical Manual aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding ENGINEERING YOUR SUCCESS www.comoso.com ...

Technical Manual HA502217U001 Issue 2 Compatible with Firmware version 1.5 or later Copyright 2014 Parker Hannifin Manufacturing Limited All rights strictly reserved. No part of this document may be stored in a retrieval system, or transmitted in any form or by any means to persons not employed by a Parker company without written permiss ...

DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Parker-Hannifin Corporation, its subsidiaries and authorized distributors provide product or system options for further investigation by users having technical expertise ...

Intended Users This manual is to be made available to all persons who are required to install, configure or service equipment described herein, or any other associated operation. The information given is intended to highlight safety issues, EMC considerat ...

1. This equipment can endanger life by exposure to rotating machinery and high voltages. 2. The equipment must be permanently earthed due to the high earth leakage current, and the drive motor must be connected to an appropriate safety earth. 3. Ensure all incoming supplies are isolated ...

AC30V Encoder Option ............................................................................................... 1 Introduction ....................................................................................................... ...

AC30V ENCODER OPTION Introduction The Encoder Option Module is compatible with the AC30V range of drives, with firmware version 1.5 or later. It offers compatibility with a wide range of encoders from many manufacturers. Using this module enables the AC30V to operate in closed-loop speed control. Alternatively the encoder input may be ...

Installation 1. This equipment contains electrostatic discharged (ESD) sensitive parts. Observe static control precautions when handling, installing and servicing this product. 2. Refer to the AC30V product manual Chapter 1: Safety before installing or removing an encoder option. 3. Ensure all power is removed from the drive. 4. Remove ...

6. Click the Option into place and tighten the retaining screw, as shown. 7. Slide and click back the VCM lower cover, tighten the retaining screw and slot back the GKP. www.comoso.com ...

User Terminals The encoder option module contains blocks of user terminals, as shown below. Thermistor Input Encoder Inputs Encoder Supply Encoder Cable screen www.comoso.com ...