Vacon 100 Installation Manual

This manual is copyright of Vacon Plc. All Rights Reserved. ABOUT THE PRODUCT This manual describes the Vacon 100 Enclosed Drive. The power range of the drive is between 75-800 kW, and its voltage range is 380-500 V or 525-690 V. The drive comes installed in a cabinet, and is available in 4 dif ...

Preface About this manual 3 About the product 3 1 Approvals 7 2 Safety 9 2.1 The safety symbols used in the manual and the drive 9 2.2 Warning 9 2.3 Caution 10 2.4 Grounding and earth fault protection 11 2.5 Using an RCD or an RCM device 12 3 Receiving the delivery 13 3.1 Package label 13 3.2 Type designation code 14 3.3 The con ...

68 7.1 Commissioning safety 68 7.2 Operation of the motor 69 7.2.1 Checks before starting the motor 69 7.3 Measuring the cable and motor insulation 69 7.4 Installation in a marine environment 69 7.5 Installation in an IT system 69 7.5.1 The EMC jumper in MR8 70 7.5.2 The EMC jumper in MR9 71 7.5.3 The EMC ...

1. EC Declaration of conformity • Find the EC Declaration of Conformity on the next page. 2. UL approval * • cULus approval file number E171278. * The UL approval is valid for input voltage up to 600 V. APPROVALS VACON · 7 24-HOUR SUPPORT +358 (0)201 212 575 · EMAIL: VACON ...

We Manufacturer’s name: Vacon Oyj Manufacturer’s address: P.O. Box 25 Runsorintie 7 FIN-65381 Vaasa Finland hereby declare that the product Product name: Vacon 100 AC drive Model Designation: Wall-Mounted Drives: Vacon 0100 3L 0003 2...0310 2 Vacon 0100 3L 0003 4...0310 4 Vacon 0100 3L 0003 5...0310 5 Vacon 0100 3L 0004 6...0 ...

This manual contains warnings and cautions, which are identified with safety symbols. The warnings and cautions give important information on how to prevent injury and damage to the equipment or your system. Read the warnings and cautions carefully and obey their instructions. Table 1: The safe ...

DC terminals when the drive is connected to mains. These terminals are live when the drive is connected to mains, also when the motor does not operate. WARNING! Do not touch the control terminals. They can have a dangerous voltage also when the drive is disconnected ...