Omega MAX-EDP Operation Manual
Text of the manual
COPYRIGHT 2007: OMEGA RESEARCH & DEVELOPMENT, INC.
Omega
MAX-EDP
OPERATION MANUAL
FRONT COVER
PRINTER’S NOTE:
production front cover
is color; this is a
place marker cover.
Products manufactured and sold by OMEGA RESEARCH & DEVELOPMENT,
INC. (the "Company"), are warranted to be free from defects in materials and
workmanship under normal use. If a pr
This device complies with FCC Rules part 15. Operation is subject to the
following two conditions, (1) This device may not cause harmful inter-
ference and, (2) This device must accept any interference that may be
received, including interference that may cause undesired operation.
The manufacturer is not responsible for any radio or TV interference
caused b
Page - 3
Table of Contents
Introduction ............................................................................. 4-7
Status Light, Valet Switch & Transmitter
System Versatility - An Important Note ........................................ 7
Using the MAX-EDP System ................................................. 8
Arming Using the Transmitter .........
Welcome to the convenience and protection which is offered by your
MAX-EDP vehicle security system. The MAX-EDP is designed and
manufactured by Omega Research and Development, a world leader in
vehicle convenience and security since 1975. Your system offers easy,
carefree operation, and the modular design allows its many impressive
features to be customize
button switches, each being labeled with an icon as to function.
However, a popular upgrade option supplementing the standard trans-
mitter is the Echo 2-way controller. The Echo, in addition to operating your
system, also receives signals from the system, and displays a variety of
system conditions on its LCD screen. A section of this booklet describes
op
Page - 6
“arm/lock”
•
Pressing and releasing the “arm/lock” button arms the security system
and locks the doors.
•
Pressing and holding this button for three seconds will first arm, and then
activate the Panic feature, locking the doors.
•
Pressing the “arm/lock” and “disarm/unlock” buttons together activates
the remote starting featu
Pressing the “OPTION” button for two seconds can be used to activate
an extra output, known as the “2nd channel”, for an optional function
such as trunk release.
•
Pressing and releasing this button twice arms or disarms the system
without the confirmation chirps.
•
Pressing this button immediately after arming will leave the ala
Arming Using the Transmitter
The system can always be armed from the transmitter, if the ignition key
is “off” and the system is not in the Valet Mode. To arm the system, exit the
vehicle, close all of the doors, and simply press and release the “arm/
lock” button once.
Your MAX-EDP system is designed to deter theft of both your vehicle
and its cont
Arming Bypass: Upon arming, if any system sensing circuit is inoperable,
that circuit only will automatically be bypassed. When an unsecured
sensing circuit is in a bypassed state, all other normally operating circuits
will be protected. Should the bypassed circuit become secured, it will
automatically be reinstated for protection 5 seconds later. When ce