Unitron 14350 Operation & User’s Manual
Text of the manual
73 Mall Drive, Commack, NY 11725 • 631-543-2000 (P) • 631-589-6975 (F)
www.unitronusa.com • [email protected]
EXAMET-5
MICROSCOPE SERIES
MANUAL
EXAMET-5 SERIES MICROSCOPE
UNITRON®
73 Mall Drive, Commack, NY 11725 • 631-543-2000 • www.unitronusa.com
2
CONTENTS
SAFETY NOTES .................................................................................................................. 3
CARE AND MAINTENANCE ...................................................................................
EXAMET-5 SERIES MICROSCOPE
UNITRON® 73 Mall Drive, Commack, NY 11725 • 631-543-2000 • www.unitronusa.com
3
SAFETY NOTES
1. Open the shipping carton carefully to prevent any accessory, i.e. objectives or eyepieces, from
dropping and being damaged.
2. Keep the instrument out of direct sunlight, high temperature or humidi
EXAMET-5 SERIES MICROSCOPE
UNITRON® 73 Mall Drive, Commack, NY 11725 • 631-543-2000 • www.unitronusa.com
4
INTRODUCTION
Congratulations on the purchase of your new UNITRON® microscope. UNITRON® microscopes are
engineered and manufactured to the highest quality standards. Your microscope will last a lifetime if
used a
EXAMET-5 SERIES MICROSCOPE
UNITRON® 73 Mall Drive, Commack, NY 11725 • 631-543-2000 • www.unitronusa.com
5
COMPONENTS DIAGRAM 1 – Reflected Model
Analyzer Slot
Eyepiece
Polarizing
Slot
Stage
Coarse
Focusing Knob
Light Selection
Lever
Fine
Focusing Knob
Variable Light
Intensity Knob
Field Diaphragm
Adjustment Lever
Ap
EXAMET-5 SERIES MICROSCOPE
UNITRON® 73 Mall Drive, Commack, NY 11725 • 631-543-2000 • www.unitronusa.com
6
COMPONENTS DIAGRAM 2 – Reflected/Transmitted Model
Reflected
Illuminator
Diaphragm
Centering Screws
Power
(ON/OFF)
Switch
Fine Focusing
Knob
Stand
Fuse Holders
Power Cord
Receptacle
Trinocular Head
Camera Port
E
EXAMET-5 SERIES MICROSCOPE
UNITRON® 73 Mall Drive, Commack, NY 11725 • 631-543-2000 • www.unitronusa.com
7
ASSEMBLY
The diagram below shows how to assemble the various modules. The numbers indicate the order of
assembly.
When assembling the microscope, make sure that all parts are free of dust and dirt, and avoid scrat
EXAMET-5 SERIES MICROSCOPE
UNITRON® 73 Mall Drive, Commack, NY 11725 • 631-543-2000 • www.unitronusa.com
8
DETAILED ASSEMBLY
Installing the Transmitted
Lamp Housing (Fig. 1)
Align the guide pins ① with the guide sockets ② and push
the lamp housing securely into the stand.
Mounting the Stage (Fig. 2)
Completely loos
EXAMET-5 SERIES MICROSCOPE
UNITRON® 73 Mall Drive, Commack, NY 11725 • 631-543-2000 • www.unitronusa.com
9
DETAILED ASSEMBLY (continued)
Installing the Reflected Illuminator (Fig. 4)
Completely loosen the lock screw ① of the illuminator.
As shown, position the illuminator above the dovetail hole, tilt
it slightly dow
EXAMET-5 SERIES MICROSCOPE
UNITRON® 73 Mall Drive, Commack, NY 11725 • 631-543-2000 • www.unitronusa.com
10
DETAILED ASSEMBLY (continued)
Installing the Eyepieces (Fig. 7)
Remove the covers ① from the eyepiece tubes and carefully
insert the each eyepiece ② into each of the eyepiece tubes.
Connecting the Power Cord