RAB Lighting WPLED52 Installation Instructions

IMPORTANT READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE. RAB fixtures must be wired in accordance with the National Electrical Code and all applicable local codes. Proper grounding is required for safety. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTAL ...

TROUBLESHOOTING 1. Check that the line voltage at the fixture is correct. Refer to wiring directions. 2. Is the fixture is grounded properly? 3. Is the photocell, if used, functioning properly? WPLED52-IN-0711 WIRING Universal voltage driver permits operation at 120V to 277VAC, 50 or 60 Hz except fixtures factory orde ...