Lutron Electronics Roller 20 Installation Manuals

Text of Lutron Electronics Roller 20 Installation Manuals

Bracket to bracket

(System Width) Fabric Width Lutron® roller 20 fascia mount chassis Installation Guide (please read before installing) English Box Contents: Orient the buttons and wiring 4 Mount top/back cover 1 Pre-drill top/back to allow clearance for the entry of wires without interfering with the bracket. Follow figure below for suggested hole locations. Notes: • Hole should be large enough to allow adjustment during install without pinching the w

Adjust the shade

6 Ensure that the shade is level and centered. 6.1 Adjust shade by removing the necessary screws and moving the brackets as needed, or installing bracket leveling spacers. Note: You will need to remove the shade to access the bracket screws. 6.2 Reinstall and tighten the mounting screws. 6.3 Symptom Solution Fabric is not level. Verify the brackets are mounted level Fabric is not centered over window. Verify the bracket

Lutron Electronics Indoor Furnishing Owners Instructions: