Nortek EN-2A4 Quick Start Manual

Telephone Entry & Access Control System Quick Start Guide (P/N: EN-2A4 / EN-2M4, EN-2A7 / EN-2M7, EN-2A10 / EN-2M10, and EXN) (EN-2A4) ( EXN ) ...

UNTIL THE SYSTEM IS CONFIGURED! CAT-5 CAT-5 NOTE: This Quick start guide is applicable to EN Series Telephone Entry system units EN-2A4 / EN-2M4, EN-2A7 / EN-2M7, EN-2A10 / EN-2M10, and EXN. Network Installation Options and Connections An access control network al ...

To allow for the EN Series unit to be recognized on the local network, it is necessary to change the controller’s IP address. 1. Connect your programming computer directly to the Ethernet port of the controller. 2. Assign a static IP address of 192.168.0.149 to the computer. (For instructions on how to change the static IP addre ...

EN Series units provide the ability to add additional controllers to expand the amount of doors, inputs, and outputs. These additional controllers are referred to as clients. A client can be mounted on top of the main controller (server) or in a separate enclosure. IP Installer is a utility located on a thumb drive shipped ...

Important: Please contact Nortek Security and Control technical support for assistance during this implementation. (800)-421-1587 or 760-438-7000 Note: All TE controllers and clients must be operating on the same software revision. System failure may occur if not updated to the same software revision. Refer to Nortek Se ...

6. Locate the license client key sheet document contained in the manual and hardware packet. The system now will provide a new license key. When this key is applied to license the panel will convert from a server role to a client role 7. Copy this key so it can be pasted into the license screen. 8. Enter informat ...

14. The license page provides Software version, MAC Address and Edit key to change the license key. 15. Click on the Edit key and past the new license 16. Click Save. NOTE: The TE Front End is now a client which can be added to the EN Models as an expansion Module. The license screen will now say TE 2 Door Client ...

Specific information must be input into the system to establish basic user profile. Perform the following steps to create a new user profile. 1. On the main navigation menu, Click New User button. The Resident data entry fields will appear. 2. Input relevant data into data entry boxes provided under the Personal section. A * den ...

3 AFTER SCROLLING, ENTER THE RESIDENT DIRECTORY NUMBER AND TALK WITH RESIDENT ENTER RESIDENT NUMBER OR SCROLL THROUGH TO RESIDENT’S NAME 2 VISITOR 1 USE NAVIGATION KEYS TO SCROLL TO DIRECTORY EN Unit Operation Requesting Access with an Entry Code • Residents have up to 40 seconds to key in their entry code. • Up to eight se ...

10016960 A Limited Warranty This Nortek Security & Control LLC product is warranted against defects in material and workmanship for twenty-four (24) months. This warranty extends only to wholesale customers who buy direct from Nortek or through Nortek’s normal distribution channels. Nortek Security & Contro ...