norbar PneuTorque PTS-52-500 Operator's Manual

2 Safety 3 General Safety Rules 3 Projectile Hazards 3 Entanglement Hazards 3 Operating Hazards 3 Repetitive Motions Hazards 4 Accessory Hazards 4 Workplace Hazards 4 Dust and Fume Hazards 4 Noise Hazards 5 Vibration Hazards 5 Additional Safety Instructions for Pneumatic Power Tools 5 PTS Specific Safety Instruc ...

This manual covers the setup and use of Norbar PneuTorque® PTS stall tools. Part Number Model Direction Maximum Torque 180241.B06 PTS-52-500 Bi-directional 500 N·m 180242.B06 PTS-52-800 Bi-directional 800 N·m 180243.B06 PTS-72-1000 Bi-directional 1000 N·m 180244.B08 PTS-72-1350 Bi-directional 1350 N·m 180245.B08 PTS ...

General Safety Rules: • For multiple hazards, read and understand the safety instructions before installing, operating, repairing, maintaining, changing accessories on, or working near the assembly power tool for threaded fasteners. Failure to do so can result in serious bodi ...

• Release the trigger in the case of an interruption of the energy supply. • Use only lubricants recommended by the manufacturer. • Do not use in confined spaces and beware of crushing hands between tool and workpiece. Repetitive Motions Hazards: • When using a power tool for threaded fasten ...

problems, such as tinnitus (ringing, buzzing, whistling or humming in the ears). Therefore a risk assessment and implementation of appropriate controls for these hazards are essential. • Appropriate controls to reduce the risk may include a ...

performance. Therefore, requirements for length and diameter of the hose shall be specified. • Never carry an air tool by the hose. PTS Specific Safety Instructions: • This tool is intended for use with threaded fasteners. Other uses within the limits ...

threaded fasteners. There are models to cover torque capacities of 500 N·m to 6000 N·m. The tools use an external air pressure regulator (included in a Lubro Control Unit supplied as an accessory) to set the air pressure that controls the sta ...

Hose 28933 28933 28933 28933 28933 Lubro Control Unit 16074 16074 16074 16074 16074 ¾” Drive Square (fixing screw) 18544 (25351.30) 18779 (25352.45) - - - 1” Drive Square (fixing screw) 18545 (25351.30) 18492 (25352.45) TBC 18934 (25352.60) - 1 ½” Drive ...