Norac UC4+ Installation Manual

Installation Manual Spray Height Controller Improving the competitiveness of Industry and Agriculture through Precision Measurement ...

Copyright © 2005-08 by NORAC Systems International Inc. Reorder P/N: UC4+BC+JD6-INST Rev A (JOHN DEERE 4920) NORAC Systems International Inc. reserves the right to improve products and their specifications without notice and without the requirement to update products sold previously. Every effort has been made to ensure the accuracy of th ...

1 INTRODUCTION.................................................................................................................................. 1 2 GENERAL SYSTEM DESCRIPTION .................................................................................................. 2 3 PARTS LISTS ................................................... ...

manufactured with top quality components and is engineered using the latest technology to provide operating features and reliability unmatched for years to come. When properly used the system can provide protection from sprayer boom damage, improve s ...

Figure 1 depicts the general system layout of the UC4+ Spray Height Controller system. Figure 1 – System Components and General Location NOTICE: Every effort has been made to ensure the accuracy of the information contained in this manual. All parts supplied are selected specially to fit the sprayer to facilitate a complet ...

The parts that come with your UC4+ Spray Height Controller are listed in Table 1. The item number on the left side of this table references each part. Please ensure that all parts in your kit are present before proceeding with your installation. Table 1 – JOHN DEERE 4920 Spray Height Controller System Parts (Rev A) Item Part Number Name Q ...

Item Part Number Name Quantity Picture F02 104369 PLUG - 6MBP 4 F03 104586 TEE ADAPTER - 6FORXR 6MORT 3 F04 104691 TEE ADAPTER - 4FORXR 4MORT 1 F05 104693 MALE ADAPTER - 4MOR 4MB 1 F06 104884 MALE TO FEMALE ADAPTER - 6MOR 8FORX 2 F07 104885 TEE ADAPTER - 8FORXR 8MORT 2 F08 105226 MALE TO FE ...

configuration. Figure 2 – UC4+ Spray Height Controller Components ...

4.1 EXISTING SYSTEM CHECK It is necessary to check the existing system’s functionality before installing the UC4+ system. 1. Drive your sprayer onto a flat piece of land, with unobstructed boom movement (e.g. no power lines). 2. Test that all boom functions operate correctly. As you test each function check it off in Table 3. ...