Lippert Components ground control TT Owner's Manual

TABLE OF CONTENTS System Information 3 Safety Information 3 Prior to Operation 3 Operation - Power Tongue Jack 4 Unhitching From A Tow Vehicle 4 Reconnecting to Tow Vehicle 4 Touch Panel Diagram - Auto Leveling Control Touch Panel 5 Operation - Auto Leveling Control Touch Panel 5 Basic Power Tongue Jack Operation 5 Unhitching From A Tow Vehicle 5 Auto Level 6 Hitch Recognition 6 Touch Panel Dia ...

System Information With the push of a button, the Ground Control® TT Leveling System levels and stabilizes your travel trailer quickly and accurately, enhancing your overall camping experience. It can take up to an hour to get a travel trailer level with manual jacks, chocks and wedges. The Ground Control® TT Leveling System saves you time by leveling and stabilizing the travel trailer in a m ...

NOTE: The "On" and "Off" switch (Fig. 2A) controls the Power Tongue Jack's light only. If left on for an extended period of time, the light will drain the trailer's battery. NOTE: The Power Tongue Jack is designed for vertical movement of the trailer only. Unhitching From A Tow Vehicle NOTE: Prior to unhitching from the tow vehicle, ensure trailer is parked on a level surface and chock the tire ...

Basic Power Tongue Jack Operation • To turn on the touch panel, press both "UP" and "DOWN" arrows (Fig. 3B and Fig. 3C) at the same time. The green indicator LED (Fig. 3A) will turn on. • Press the "UP" arrow (Fig. 3B) to extend the Power Tongue Jack. • Press the "DOWN" arrow (Fig. 3C) to retract the Power Tongue Jack. Unhitching From A Tow Vehicle NOTE: Prior to unhitching from the tow v ...

2. To turn on the Auto Leveling Control Touch Panel, press both "UP" and "DOWN" arrows (Fig. 3B and Fig. 3C) at the same time. The green indicator LED (Fig. 3A) will turn on. NOTE: The touch panel will remain on as long as the user is pressing buttons. It will time out after approximately 5 minutes without use. 3. Press the "UP" arrow (Fig. 3B) on the Auto Leveling Control Panel to extend the ...

Callout Description A Jack Buttons - Select Front, Rear, Right and Left jacks to be operated depending on mode. Jacks available to be operated will be highlighted in blue. Only the Power Tongue Jack can be operated in Standard Mode. In Manual Mode (Fig. 7), all jacks are available to be operated (No Power Tongue Jack operation available). B Up and Down Arrows - Scrolls through options on scree ...

Fig. 5 A Operation - OneControl Touch Panel Fig. 6 Fig. 7 Manual Mode A A D C E F B Basic Jack Operation In Manual Mode To reach Manual Mode (Fig. 7) for leveling: 1. While in Standard Mode (Fig. 4), use the arrows (Fig. 4B) to scroll to Manual Mode (Fig. 4G). Hit "ENTER" (Fig. 4H). 2. Front and rear jacks can be operated in Manual Mode. The Power Tongue Jack cannot be operated in Manual Mode. ...

OneControl Touch Panel In Standard and Manual Modes Standard Mode Features • Press "EXTEND" (Fig. 4J) or "RETRACT" (Fig. 4I) and "FRONT" (Fig. 4A) to extend or retract the Power Tongue Jack. • Press the "AUTO LEVEL" (Fig. 4M) button to start the auto leveling sequence. • Press the "AUTO HITCH" (Fig. 4N) button to start the hitch recognition sequence when reconnecting to the tow vehicle. � ...

NOTE: Once the automatic leveling cycle has been started, it is important that there is no movement in the trailer until the leveling process is complete. Failure to remain still during the leveling cycle could have an effect on the performance of the leveling system. NOTE: Sequence may vary slightly based on the height of the trailer coupler prior to leveling. 6. When the Auto Level Sequence ...

Touch Panel Diagram - OneControl App from MyRV NOTE: The OneControl Leveling App is available on iTunes® for iPhone® and iPad® and also on Google Play™ for Android™ users. Callout Description A Jack Buttons - Select Front, Rear, Right and Left jacks to be operated depending on mode. Jacks available to be operated will be highlighted in blue. Only the Power Tongue Jack can be operated in ...

Accessing the OneControl App 1. Ensure there is power to the trailer's wireless network. 2. Navigate to the device's (smart phone, tablet, etc.) wifi settings. Turn wireless feature on and connect to the myRV wireless network. NOTE: If this is the first time connecting to the myRV wireless network, a password will be required. The password is located on the trailer's wifi hub (Fig. 10). 3. Op ...

OneControl Touch Panel App In Standard and Manual Modes Standard Mode Features • Press "EXTEND" (Fig. 9I) or "RETRACT" (Fig. 9H) and "FRONT" (Fig. 9A) to extend or retract the Power Tongue Jack. • Press the "AUTO LEVEL" (Fig. 9J) button to start the auto leveling sequence. • Press the "AUTO HITCH" (Fig. 9K) button to start the hitch recognition sequence when reconnecting to the tow vehic ...

Unhitching From A Tow Vehicle NOTE: Prior to unhitching from the tow vehicle, ensure trailer is parked on a level surface and chock the tires of the trailer. NOTE: Ensure the foot pad of the Power Tongue Jack is pinned securely in place with the clevis pin and hairpin cotter pin. 1. Disconnect any wires, chains, or sway control that may be equipped between the tow vehicle and the trailer. Unla ...

Hitch Recognition 1. Power on the OneControl Touch Panel App. 2. Press the "Leveler" icon (Fig. 12A). 3. Press "AUTO HITCH" (Fig. 9K). A. Rear jacks will retract. B. The Power Tongue Jack will extend to the ground. C. Front leveling jacks will retract. D. The tongue jack will then adjust the height of the front of the trailer coupler to the point at which the “AUTO LEVEL” button was most r ...

Configuring Linc Remote to Sync to The One Control Touch Panel 1. Turn on the Linc™ remote control (Fig. 14I) and enter a PIN. 2. Choose "Leveler" from the menu screen. 3. Turn on the OneControl Touch Panel (Fig. 4L). 4. On the OneControl Touch Panel, press the "CONNECTED" icon at the top of the screen (Fig. 15A) quickly 6 times. Wait a few seconds until the gear icon with "OPTIONS" appears ...

Auto Level 1. Prior to auto leveling, ensure the trailer is unhitched from the tow vehicle and the tow vehicle is parked a safe distance away from the trailer. 2. Press the “ON/OFF” button (Fig. 14I) on the Linc remote if the Linc is not on. 3. Enter a PIN. 4. Choose the "LEVELER" option. 5. Press “AUTO LEVEL” (Fig. 14H). NOTE: Once the automatic leveling cycle has been started, it is ...

Error Display In OneControl Touch Panel or One Control App NOTE: Errors can only be cleared via the OneControl Touch Panel or OneControl Leveling App through MyRV®. The only exception is when the Auto Leveling Control Touch Panel (Fig. 3) was used to abort an auto-sequence. In this case the error can be cleared by pressing any Auto Leveling Control button. NOTE: To clear an error from the One ...

Special Jack Error Codes on OneControl Touch Panel or OneControl App To clear the error codes listed below: 1. Correct or otherwise repair the issue (see the table below). NOTE: In order to clear the special jack error code the jacks need to be “homed.” In order to “home” jacks, each jack must be able to retract a minimum of 6”. NOTE: The Power Tongue Jack does not need to be “home ...

Fig. 19 Fig. 20 Moving parts can pinch, crush or cut. Keep clear and use caution. Manual Override NOTE: For ease of manual override it is recommended to unplug the power harness to the motor prior to performing the manual override procedure. NOTE: Use of a 12-18 volt cordless screw gun or pneumatic screw gun is acceptable to manually override the jacks. Do not use an impact screw gun to perfor ...