Kobold MAN-SD series Operating Instructions Manual

3. Instrument Inspection............................................................ ...

into operation. Follow the instructions precisely as described herein. The devices are only to be used, maintained and serviced by persons familiar with these operating instructions and in accordance with local regulations applying to Health & Sa ...

Any use of the Digital Manometer, model: MAN-SD, which exceeds the manufacturers specification may invalidate its warranty. Therefore any resulting damage is not the responsibility of the manufacturer. The user assumes all risk for such usage. The model MAN-SD serves to measure, monitor and transmit pressure- depe ...

Before installation: • Ensure that the max. pressure in your system is within the prescribed range of the digital manometer. The measuring range can be read from the nameplate label of the device. • Make sure that the permitted max. operational temperature of the device is not exceeded. • Confirm that ...

plug M12x1 5-core cable 2 1 4 5 3 View of plug contacts 7. Electrical Connection Attention! Please ensure that you use a 9 V – alkali-manganese-block battery (IEC 6 LR 61). • Make sure that the power supply lines are not active. (Only with option limit-contacts or analogue output.) • Ope ...

For the selection of menu options, the following functions keys are available: � Next Menu Option � Previous Menu Option P Press once to Switch-on P Press twice to Switch-off P & � Exit Menu Adjustment and Function: � Value-adjustment upwards � Value-adjustment downwards P Enter value and jump to next ...

10.1. Standard version MAN-SD10... and unit with analogue output MAN-SD30... P 1xP = Unit Switch on LCD Display 1234 P 1xP = Unit Switch off � � Password input P A S S P 0 0 0 0 Password � & � � � set on 0005 (factory setting) � Cancel P Access to further Menu Options Automatic zero-point settin ...

and unit with peak value memory + analogue output MAN-SD3S... If the peak value memory is activated, the peak value can be reset by pressing the left arrow key. Note: with the switch-off of the device the peak value memory is reset. P 1xP = Unit Switched-on LCD-display ...

LCD Display 1234 P 1xP = Unit Switched-off � � Password input P A S S P 0 0 0 0 Password � & � � � Set on 0005 (factory setting) � Cancel P Access to further Menu Options Relay set point on rising pressure r E f P 0 6. 5 0 Last switching point setting � & � � � ...