MGG DTC 600 Operation & User’s Manual

MGG ipets products are reliable, effective and comfortable for large or small dogs. The system assists in controlling your dog without a leash for a range of up to 600 metres away. You can instantly send a signal from the Remote Transmitter which activates your dog’s Collar Receiver. Your dog will receive a ...

 Transmitter Indicator Light: When pressing stimulation buttons the Transmitter Indicator Light flashes green and solid red when charging the battery.  Intensity Dial: Rotate the dial to adjust the level of stimulation from 0 – 8. In addition, powers on ...

(A) When the Collar Receiver is charging the light will be a solid red. It switches to green when fully charged. (B) In standby status the Receiver Indicator Light will flash green periodically. (C) Stimulation Buttons pressed on the Remote Transmitter will cause a green light to appear on the Collar Receiver. (D) Initiating t ...

Transmitter Pairing Receptacle with the corresponding Collar Receiver Pairing Receptacle. Once the Receiver Indicator Light goes red separate the two Pairing Receptacles. The Collar Receiver is now off. Step 3 – Pairing Collar Receiver to Transmitter Rotate the In ...

1. Power on the Remote Transmitter and adjust the Intensity Dial from off to 0 or above. 2. Select the correct Collar Receiver with the Receiver Selector Dial. 3. Press the Vibration Button and the Collar Receiver will respond appropriately. Testing the Tone Function 1. To power on the Remote Transmitter move the Intensity Di ...

. Check the metal probes for tightness on a weekly basis. . Rinse the metal probes with alcohol on a weekly basis. ( NB: Please turn off the collar-receiver before touching the metal probes. ) . Check your dog’s neck for irritation and wash it on a weekly basis. Frequently Asked Questions: How old does a dog have to be before u ...

No. Please do not use this system to correct or eliminate any form of aggression or biting behavior. In the event that your dog is showing signs of aggressive behavior then contact a professional dog trainer in your vicinity. Will I get exactly 600m of range with the DTC 600 re-chargeable training collar? The range ...

. You need to charge the remote transmitter and the collar-receiver for 6H separately before initial use. . Check to see if the remote transmitter and the collar-receiver have been turned on. . Check the intensity levels of vibration and static shock . Make sure the collar-receiver has sufficient power to operate . ...

consistent with your verbal commands using the same words every time. Use the beeps as a warning by pushing the Beep button. The dog will become conditioned to the beep preceding the corrective stimulus and will soon learn to recognise the beep as a warning along with ...