NEC SV8300 System Maintenance Manual

functions, or features, at any time, without notice. NEC Corporation has prepared this document for use by its employ- ees and customers. The information contained herein is the property of NEC Corporation and shall not be reproduced without prior written approval from NEC ...

INTRODUCTION PURPOSE ................................................................................................................ 1 OUTLINE OF THIS MANUAL ................................................................................... 2 TERMS IN THIS MANUAL ....................................... ...

1-28 FAULT REPORT SCHEDULING .............................................................................. 1-29 General Description ................................................................................... ...

2-40 C.O. Line/Tie Line Fault .............................................................................................. 2-42 Power Failure Transfer (PFT) Fault ................................ ...

shooting procedure when a fault has occurred, for maintenance personnel of this system. ...

OUTLINE OF THIS MANUAL This manual consists of two chapters. The following paragraphs summarize Chapters 1 and 2. CHAPTER 1 MAINTENANCE SERVICES This chapter describes the general description, service conditions, programming and operating procedure of the maintenance services. CHAPTER 2 ...

TERMS IN THIS MANUAL PBX System Designation PBX system is designated as “PBX” or “system” usually. When we must draw a clear line between the PBX systems, they are designated as follows. SV8300: UNIVERGE SV8300 Terminal Name The following terminals are designated as “Multiline T ...

NOTE: Dterm75 (Series E)/Dterm85 (Series i) terminal can be used as the IP terminal by attaching the IP Adapter (IP Enabled Digital Multiline Terminal). This terminal provides users with all fea- tures currently available in IP Station. TERMINAL NAME PRODUCT NAME Multiline Terminal IP Sta ...