Lehner Liftechnik Delta Installation Manual

...

Edition July 2013 DELT∆∆∆∆ platform lift page 1 of 24 Table of content OBSERVE THE FOLLOWING POINTS BEFORE INSTALLATION! .................................. 2 INSTALLATION OF THE RAILS ......................................................................................... 3 LOAD AND FIXINGS OF RAILS AND PILLARS ............ ...

Edition July 2013 DELT∆∆∆∆ platform lift page 2 of 24 Observe the following points before installation! Installation teams must have a general knowledge in: • working on electric controls • basic mechanical engineering and providing adequate fixation of the rails and pillars • reading and understanding circuit diagrams ...

Edition July 2013 DELT∆∆∆∆ platform lift page 3 of 24 Fasten all screws that connect the brackets to the rail Bracket Upper rail Use an anlge water level Installation of the rails The rails can be fixed directly to the wall or on pillars that are fixed to the staircase. Step 1: If there are 2 rail sections, combine both rail ...

Edition July 2013 DELT∆∆∆∆ platform lift page 4 of 24 Step 3: First fix the upper bracket to the wall or to the upper pillar (pillars have the serial letters stamped on the base). The required dimensions for the first fixing point are given in the drawing – see dimension X1 and Y1 in example drawing below: Step 4: Adjust t ...

Edition July 2013 DELT∆∆∆∆ platform lift page 5 of 24 Load and fixings of rails and pillars ...

Edition July 2013 DELT∆∆∆∆ platform lift page 6 of 24 Installation material for fixing of the rail For concrete walls: For concrete walls: For concrete walls: For brick walls: For brick walls: Adhesive 2 components glue for brick wall installation ...

Edition July 2013 DELT∆∆∆∆ platform lift page 7 of 24 Overview platform ...

Edition July 2013 DELT∆∆∆∆ platform lift page 8 of 24 Installation of the platform onto the rail If you wish to reduce the weight of the complete unit, you can dismantle the platform floor from the carriage. Please see chapter “Changing the platform floor” for the detailed explanation. If you can manage to lift the platf ...

Edition July 2013 DELT∆∆∆∆ platform lift page 9 of 24 Use this screw for fixing the overspeed governor Lever to trigger the overspeed governor Step 7: Open the upper and lower frontal covers of the carriage. At delivery of the unit the upper carriage will be moveable (can rotate). This will facilitate the process of engaging ...