Abit BE6 Operation & User’s Manual

Text of the manual

Copyright and Warranty Notice

The information in this document is subject to change without notice and does not represent a commitment on part of the vendor, who assumes no liability or responsibility for any errors that may appear in this manual. No warranty or representation, either expressed or implied, is made with respect to the quality, accuracy or fit

BE6 Motherboard User’s Manual

Table of Contents CHAPTER 1. INTRODUCTION OF BE6 FEATURES 1-1 1-1.Features of This Motherboard 1-1 1-2. Specifications 1-2 1-3. Layout Diagram 1-3 1-4. The System Block Diagram 1-5 CHAPTER 2. INSTALLING THE MOTHERBOARD 2-1 2-1. Installing the Motherboard to the Chassis 2-2 2-2. Installation of the Penti

Introduction of BE6 Features

1-1 User’s Manual Chapter 1. Introduction of BE6 Features 1-1.Features of This Motherboard The motherboard is designed for a new generation CPUs. It supports the Intel SLOT1 structure (Pentium II/III and Celeron processors), up to 768MB of memory, super I/O, and Green PC functions. The motherboard provides high performanc

If the operating system or application software cannot handle Year 2000 dates, you will

still be facing the Y2K threat because it is not a hardware problem that relates to the motherboard itself. According to Award BIOS, it is BIOS source code released after 31 May 1995 complies with all known Y2K issues; however, it may still fa

Introduction of BE6 Features

1-3 User’s Manual 5. Multi I/O Functions ! 2x Channels of Bus Master IDE Ports supporting up to four Ultra DMA 33/66 devices ! 2x Channels of Bus Master IDE Ports supporting up to four Ultra DMA 33 devices ! PS/2 Keyboard and PS/2 Mouse Connectors ! 1x Floppy Port ( up to 2.88MB) ! 1x Parallel Port (EPP/ECP) ! 2x Serial Ports

" Supports Wake On LAN, Keyboard or Mouse, but your ATX power supply 5V

standby power must be able to provide at least a 720mA current capacity. Otherwise, the functions may not work normally. " " " " PCI slots 4 and 5 use the same bus master control signal. " " " " PCI slot 3 shares IRQ signals with the HPT366 IDE controller (Ultra AT

Introduction of BE6 Features

1-5 User’s Manual 1-3. Layout Diagram Figure 1-2. Motherboard component location

Other Motherboard Manuals