Eurotherm 2132 Operating Instructions

Operating Instructions Overtemperature Controller Eurotherm 2132 and 2116 See also the main manual for the furnace, oven or other product to which the controller is fitted. CONTENTS section page 1 Description 2 2 Basic Operating Instructions 2 3 Audible Alarm 3 4 Navigation Diagram 3 ...

2 MC03 – 1.05 1 DESCRIPTION 1.1 2132 or 2116 Controller The models 2132 and 2116 overtemperature controllers are made by Eurotherm, and are fitted by Carbolite Gero configured for immediate use. The two models are the same except for the size. They are digital instruments with a latching alarm, requiring no additional p ...

MC03 – 1.05 3 2.3 Basic Operation Use Down  and Up  to alter the overtemperature setpoint. This should normally be set a little above the maximum working temperature (say 15°C above). The unit is supplied at 15°C above the furnace or oven maximum working temperature. Press Scroll  to view the present temperat ...

Carbolite Gero Limited, Parsons Lane, Hope, Hope Valley, S33 6RB, England. Telephone: +44 (0)1433 620011 Fax: +44 (0)1433 621198 E-mail: [email protected] For preventive maintenance, repair and calibration of all Furnace and Oven products, please contact: Carbolite Gero Service Telephone: +44 (0)1433 624242 Fax: ...