Eterna FL124BPIR Safety And Installation Instructions

110909-BT HELPLINE: • T: 01933 673 144 • F: 01933 678 083 • E: [email protected] Visit our website: www.eterna-lighting.co.uk These instructions are provided as a guideline to assist you. PLEASE READ THESE INSTRUCTIONS BEFORE USING YOUR NEW FITTING PLEASE RETAIN FOR FUTURE REFERENCE Model: FL124BPIR 23W Low Energy Floodlight with 180° PIR Pack contents: PIR Floodlight x 1 23W E27 CFLi Lamp x 1 SPECIFICATION: • Detection range: max. 12 metres at approx. 180° scan • Duration time adjustment: (2±0.5) minutes to (4±1) minutes • Detection circuitry: Passive Infra-Red (PIR) • Weatherproof: IP44 ...

Where To Fit Your Floodlight & Installation: Avoid nuisance/ false triggering by directing sensor away from: • Trees and shrubs • Reflective surfaces such as smooth white walls • Swimming pools • Heat sources such as boiler flues The PIR sensor scanning specifications (approximately 12 metres at 180°) may vary slightly depending on the mounting height and location. The detection range of the unit may also alter with temperature change. Before selecting a place to install your PIR floodlight you should note that movement across the scan area is more effective than movement directly towards ...

Understanding The Controls & Troubleshooting: Fig 5 INSTALLATION: When installing the PIR flood light refer to Fig.4 on the previous page. 01) Switch off the mains before commencing installation. 02) Remove the wall bracket from the fitting by removing the screws and nuts from each side. Take care not to lose any of these parts as the nuts are not captive within the fitting - see fig.4. 03) Using the bracket as a template mark and then drill the appropriate fixing holes. 04) Secure the bracket with suitable fixings (not supplied). 05) Unscrew the junction box cover screws and remove cover, unscrew t ...