Biostar Hi-Fi A85S3 Setup Manual

FCC Information and Copyright This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. There is no guarantee that interference will not occur in a particular installation. The vendor makes no representations or warranties with respect to the contents here and specially disclaims any implied warranties of merchantability or fitness for any purpose. Further the vendor reserves the right to revise this publication and to make changes to the contents here without obligation to notify any party beforehand. Duplication of this publication, in part or in whole, is not allowed without first obtaining the vendor’s approval in writing. The content of this user’s manual is subject to be changed without notice and we will not be responsible for any mistakes found in this user’s manual. All the brand and product names are trademarks of their respective companies. Dichiarazione di conformità sintetica Ai sensi dell’art. 2 comma 3 del D.M. 275 del 30/10/2002 Si dichiara che questo prodotto è conforme alle normative vigenti e soddisfa i requisiti essenziali richiesti dalle direttive 2004/108/CE, 2006/95/CE e 1999/05/CE quando ad esso applicabili Short Declaration of conformity We declare this product is complying with the laws in force and meeting all the essential requirements as specified by the directives 2004/108/CE, 2006/95/CE and 1999/05/CE whenever these laws may be applied

Chapter 1: Introduction ...............................................................1 1.1 Before You Start......................................................................... 1 1.2 Package Checklist..................................................................... 1 1.3 Motherboard Specifications....................................................... 2 1.4 Rear Panel Connectors ............................................................. 4 1.5 Motherboard Layout .................................................................. 5 Chapter 2: Hardware Installation................................................7 2.1 Install Central Processing Unit (CPU) ....................................... 7 2.2 Install a Heatsink ....................................................................... 8 2.3 Connect Cooling Fans............................................................... 9 2.4 Install System Memory ............................................................ 10 2.5 Expansion Slots....................................................................... 12 2.6 Jumper Setting ........................................................................ 13 2.7 Headers & Connectors ............................................................ 14 Chapter 3: UEFI BIOS & Software.............................................19 3.1 UEFI BIOS Setup .................................................................... 19 3.2 BIOS Update ........................................................................... 19 3.3 Software................................................................................... 24 Chapter 4: Useful Help ..............................................................27 4.1 Driver Installation..................................................................... 27 4.2 AMI BIOS Beep Code.............................................................. 28 4.3 Troubleshooting....................................................................... 28 4.4 RAID Functions ....................................................................... 30 4.5 AMD Dual Graphics Technology ............................................. 34 Appendix: Specifications In Other Languages .......................36 Arabic ......................................................................................................... 36 French ........................................................................................................ 38 German....................................................................................................... 40 Italian.......................................................................................................... 42 Japanese.................................................................................................... 44 Polish.......................................................................................................... 46 Portuguese ................................................................................................. 48 Russian....................................................................................................... 50 Spanish....................................................................................................... 52

1 CHAPTER 1: INTRODUCTION 1.1 Before You Start Thank you for choosing our product. Before you start installing the motherboard, please make sure you follow the instructions below: � Prepare a dry and stable working environment with sufficient lighting. � Always disconnect the computer from power outlet before operation. � Before you take the motherboard out from anti-static bag, ground yourself properly by touching any safely grounded appliance, or use grounded wrist strap to remove the static charge. � Avoid touching the components on motherboard or the rear side of the board unless necessary. Hold the board on the edge, do not try to bend or flex the board. � Do not leave any unfastened small parts inside the case after installation. Loose parts will cause short circuits which may damage the equipment. � Keep the computer from dangerous area, such as heat source, humid air and water. � The operating temperatures of the computer should be 0 to 45 degrees Celsius. � To avoid injury, be careful of: Sharp pins on headers and connectors Rough edges and sharp corners on the chassis Damage to wires that could cause a short circuit 1.2 Package Checklist � Serial ATA Cable x2 � Rear I/O Panel for ATX Case x1 � Installation Guide x1 � Fully Setup Driver DVD x1 Note: The package contents may be different due to the sales region or models in which it was sold. For more information about the standard package in your region, please contact your dealer or sales representative.

Specifications CPU Support Socket FM2 for AMD A-series processor Maximum CPU TDP (Thermal Design Power): 100Watt * Please refer to www.biostar.com.tw for CPU support list. Chipset AMD A85 FCH (Hi-Fi A85S3) AMD A75 FCH (Hi-Fi A75S3) AMD A55 FCH (Hi-Fi A55S3) Memory Supports Dual Channel DDR3 800/ 1066/ 1333/ 1600/ 1866 2 x DDR3 DIMM Memory Slot, Max. Supports up to 32 GB Memory Each DIMM supports non-ECC 512MB/ 1/ 2/ 4/ 8/ 16 GB DDR3 module * Please refer to www.biostar.com.tw for Memory support list. Storage AMD A85/A75/A55 FCH Supports RAID 0,1,10, 5 & AHCI (AMD A85 FCH) Supports RAID 0,1,10, & AHCI (AMD A75/A55 FCH), LAN Realtek RTL 8111F 10/ 100/ 1000 Mb/s auto negotiation, Half / Full duplex capability Audio Codec ALC662 5.1 Channels, High Definition Audio, Biostar Hi-Fi USB AMD A85/A75 FCH: 6x USB 2.0 port (2 on rear I/Os and 4 via internal headers) 4x USB 3.0 port (2 on rear I/Os and 2 via internal headers) AMD A55 FCH: 8x USB 2.0 port (4 on rear I/Os and 4 via internal headers) Expansion Slots 1x PCI Slot 1x PCIe 2.0 x1 Slot 1x PCIe 2.0 x16 Slot Rear I/Os Hi-Fi A85S3: 1x PS/2 Mouse 1x PS/2 Keyboard 1x VGA Port 1x HDMI Port 1x LAN port 2x USB 2.0 Port 2x USB 3.0 Port 3x Audio Jack Hi-Fi A75S3: 1x PS/2 Mouse 1x PS/2 Keyboard 1x VGA Port 1x DVI Port 1x LAN port 2x USB 2.0 Port 2x USB 3.0 Port 3x Audio Jack Hi-Fi A55S3: 1x PS/2 Mouse 1x PS/2 Keyboard 1x VGA Port 1x DVI Port 1x LAN port 4x USB 2.0 Port 3x Audio Jack

3 Specifications Internal I/Os Hi-Fi A85S3: 6x SATA 6.0Gb/s Connector 2x USB 2.0 Header 1x USB 3.0 Header 1x 4-Pin Power Connector 1x 24-Pin Power Connector 1x CPU Fan Connector 1x System Fan Connector 1x Front Panel Header 1x Front Audio Header 1x Clear CMOS Header 1x Printer Port Header 1x Serial Port Header Hi-Fi A75S3: 6x SATA 6.0Gb/s Connector 2x USB 2.0 Header 1x USB 3.0 Header 1x 4-Pin Power Connector 1x 24-Pin Power Connector 1x CPU Fan Connector 1x System Fan Connector 1x Front Panel Header 1x Front Audio Header 1x Clear CMOS Header 1x Printer Port Header 1x Serial Port Header Hi-Fi A55S3: 6x SATA 3.0Gb/s Connector 2x USB 2.0 Header 1x 4-Pin Power Connector 1x 24-Pin Power Connector 1x CPU Fan Connector 1x System Fan Connector 1x Front Panel Header 1x Front Audio Header 1x Clear CMOS Header 1x Printer Port Header 1x Serial Port Header Form Factor microATX Form Factor, 244 mm x 191 mm OS Support Windows XP / Vista / 7/ 8 Biostar reserves the right to add or remove support for any OS with or without notice.

Hi-Fi A85S3 Hi-Fi A75S3 Hi-Fi A55S3 Note 1: HDMI / DVI-D / VGA Output require an AMD family processor with intedrated graphics. Note 2: The mainboard supports two independent display outputs. Note 3: Since the audio chip supports High Definition Audio Specification, the function of each audio jack can be defined by software. The input / output function of each audio jack listed above represents the default setting. However, when connecting external microphone to the audio port, please use the Line In (Blue) and Mic In (Pink) audio jack. Note 4: Maximum resolution: Outputs Maximum resolution Bit Depth 1920 x 1080 @60Hz 24, 30, 36 bpp HDMI 1920 x 1200 @60Hz 24 bpp 1920 x 1200 @60Hz 30 bpp DVI-D 2560 x 1600 @60Hz 24 bpp VGA 1920 x 1600 @60Hz --

Note1: ■ represents the 1st pin. Note2: HDMI connector is for Hi-Fi A85S3. DVI connector is for Hi-Fi A75S3 & Hi-Fi A55S3. Note3: The USB 3.0 header is only for Hi-Fi A85S3 and Hi-Fi A75S3

7 CHAPTER 2: HARDWARE INSTALLATION 2.1 Install Central Processing Unit (CPU) Step 1: Locate the CPU socket on the motherboard Step 2: Pull the socket locking out from the socket and then raise the lever up to a 90-degree angel. Step 3: Look for the white triangle on socket, and the gold triangle on CPU should point towards this white triangle. The CPU will fit only in the correct orientation. Note: The CPU fits only in one correct orientation. Do not force the CPU into the socket to prevent damaging the CPU.

2.2 Install a Heatsink Step 1: Place the heatsink and fan assembly onto the retention frame. Match the heatsink clip with the socket mounting-lug. Hook the spring clip to the mounting-lug. Step 2: On the other side, push the retention clip straight down to lock into the plastic lug on the retention frame, and then press down the locker until it stops. Note1: Do not forget to connect the CPU fan connector. Note2: For proper installation, please kindly refer to the installation manual of your CPU heatsink.

9 2.3 Connect Cooling Fans These fan headers support cooling-fans built in the computer. The fan cable and connector may be different according to the fan manufacturer. Connect the fan cable to the connector while matching the black wire to pin#1. CPU_FAN1: CPU Fan Header Pin Assignment 1 Ground 2 +12V 3 FAN RPM rate sense 4 Smart Fan Control (By Fan) SYS_FAN1: System Fan Header Pin Assignment 1 Ground 2 +12V 3 FAN RPM rate sense Note: CPU_FAN1, SYS_FAN1 support 4-pin and 3-pin head connectors. When connecting with wires onto connectors, please note that the red wire is the positive and should be connected to pin#2, and the black wire is Ground and should be connected to GND.

A. DDR3 Modules Step 1: Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the slot such that the notch on the DIMM matches the break on the slot. Step 2: Insert the DIMM vertically and firmly into the slot until the retaining chip snap back in place and the DIMM is properly seated. Note: If the DIMM does not go in smoothly, do not force it. Pull it all the way out and try again.

11 B. Memory Capacity DIMM Socket Location DDR3 Module Total Memory Size DDR3_A1 512MB/1GB/2GB/4GB/8GB/16GB DDR3_B1 512MB/1GB/2GB/4GB/8GB/16GB Max is 32GB. C. Dual Channel Memory Installation Please refer to the following requirements to activate Dual Channel function: Install memory module of the same density in pairs, shown in the table. Dual Channel Status DDR3_A1 DDR3_B1 Disabled O X Disabled X O Enabled O O (O means memory installed, X means memory not installed.) Note: The DRAM bus width of the memory module must be the same (x8 or x16)

PEX16_1: PCI-Express Gen2 x16 Slot - PCI-Express 2.0 compliant. - Maximum theoretical realized bandwidth of 8GB/s simultaneously per direction, for an aggregate of 16GB/s totally. - PCI-Express Gen2 supports a raw bit-rate of 5.0Gb/s on the data pins. PEX1_1: PCI-Express Gen2 x1 Slot - PCI-Express 2.0 compliant. - Data transfer bandwidth up to 500MB/s per direction; 1GB/s in total PCI1: Peripheral Component Interconnect Slot This motherboard is equipped with 1 standard PCI slot. PCI stands for Peripheral Component Interconnect, and it is a bus standard for expansion cards. Install an Expansion Card You can install your expansion card by following steps: 1. Read the related expansion card's instruction document before install the expansion card into the computer. 2. Remove your computer's chassis cover, screws and slot bracket from the computer. 3. Place a card in the expansion slot and press down on the card until it is completely seated in the slot. 4. Secure the card’s metal bracket to the chassis back panel with a screw. 5. Replace your computer's chassis cover. 6. Power on the computer, if necessary, change BIOS settings for the expansion card. 7. Install related driver for the expansion card.

13 2.6 Jumper Setting The illustration shows how to set up jumpers. When the jumper cap is placed on pins, the jumper is “close”, if not, that means the jumper is “open”. Pin opened Pin closed Pin1-2 closed JCMOS1: Clear CMOS Header Placing the jumper on pin2-3, it allows user to restore the BIOS safe setting and the CMOS data. Please carefully follow the procedures to avoid damaging the motherboard. 3 1 Pin 1-2 Close: Normal Operation (default). 3 1 Pin 2-3 Close: Clear CMOS data. ※ Clear CMOS Procedures: 1. Remove AC power line. 2. Set the jumper to “Pin 2-3 close”. 3. Wait for five seconds. 4. Set the jumper to “Pin 1-2 close”. 5. Power on the AC. 6. Load Optimal Defaults and save settings in CMOS.

ATXPWR1: ATX Power Source Connector This connector allows user to connect 24-pin power connector on the ATX power supply. Pin Assignment Pin Assignment 13 +3.3V 1 +3.3V 14 -12V 2 +3.3V 15 Ground 3 Ground 16 PS_ON 4 +5V 17 Ground 5 Ground 18 Ground 6 +5V 19 Ground 7 Ground 20 NC 8 PW_OK 21 +5V 9 Standby Voltage+5V 22 +5V 10 +12V 23 +5V 11 +12V 24 Ground 12 +3.3V ATXPWR2: ATX Power Source Connector This connector will provide +12V to CPU power circuit. Pin Assignment 1 +12V 2 +12V 3 Ground 4 Ground Note1: Before you power on the system, please make sure that both ATXPWR1 and ATXPWR2 connectors have been plugged-in. Note2: Insufficient power supplied to the system may result in instability or the peripherals not functioning properly. Use of a PSU with a higher power output is recommended when configuring a system with more power-consuming devices.

15 PANEL1: Front Panel Header This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and speaker connection. It allows user to connect the PC case’s front panel switch functions. Pin Assignment Function Pin Assignment Function 1 +5V 9 N/A 2 N/A 10 N/A N/A 3 N/A 11 N/A N/A 4 Speaker Speaker Connector 12 Power LED (+) 5 HDD LED (+) 13 Power LED (+) 6 HDD LED (-) Hard drive LED 14 Power LED (-) Power LED 7 Ground 15 Power button 8 Reset control Reset button 16 Ground Power-on button SATA1~SATA6: Serial ATA Connectors These connectors connect to SATA hard disk drives via SATA cables. � Hi-Fi A85S3 & Hi-Fi A75S3 satisfy the SATA 3.0 spec and with transfer rate of 6.0Gb/s. � Hi-Fi A55S3 satisfies the SATA 2.0 spec and with transfer rate of 3.0Gb/s. Pin Assignment 1 Ground 2 TX+ 3 TX- 4 Ground 5 RX- 6 RX+ 7 Ground

This header allows user to connect additional USB cable on the PC front panel, and also can be connected with a wide range of simultaneously accessible external Plug and Play peripherals. Pin Assignment Pin Assignment 1 VBUS0 11 D2+ 2 SSRX1- 12 D2- 3 SSRX1+ 13 Ground 4 Ground 14 SSTX2+ 5 SSTX1- 15 SSTX2- 6 SSTX1+ 16 Ground 7 Ground 17 SSRX2+ 8 D1- 18 SSRX2- 9 D1+ 19 VBUS1 10 ID 20 Key Note: The USB 3.0 header is only for Hi-Fi A85S3 and Hi-Fi A75S3 F_USB1/F_USB2: Headers for USB 2.0 Ports at Front Panel This header allows user to connect additional USB cable on the PC front panel, and also can be connected with a wide range of simultaneously accessible external Plug and Play peripherals. Pin Assignment 1 +5V (fused) 2 +5V (fused) 3 USB- 4 USB- 5 USB+ 6 USB+ 7 Ground 8 Ground 9 NC 10 Key

17 F_AUDIO1: Front Panel Audio Header This header allows user to connect the front audio output cable with the PC front panel. This header supports HD and AC’97 audio front panel connector. HD Audio AC’97 Pin Assignment Pin Assignment 1 Mic Left in 1 Mic In 2 Ground 2 Ground 3 Mic Right in 3 Mic Power 4 GPIO 4 Audio Power 5 Right line in 5 RT Line Out 6 Jack Sense 6 RT Line Out 7 Front Sense 7 Reserved 8 Key 8 Key 9 Left line in 9 LFT Line Out 10 Jack Sense 10 LFT Line Out Note1: It is recommended that you connect a high-definition front panel audio module to this connector to avail of the motherboard's high definition audio capability. Note2: Please try to disable the "Front Panel Jack Detection" if you want to use an AC'97 front audio output cable. The function can be found via O.S. Audio Utility. J_COM1: Serial Port Connector The motherboard has a Serial Port Connector for connecting RS-232 Port. Pin Assignment 1 Carrier detect 2 Received data 3 Transmitted data 4 Data terminal ready 5 Signal ground 6 Data set ready 7 Request to send 8 Clear to send 9 Ring indicator 10 NC

This header allows you to connector printer on the PC. Pin Assignment Pin Assignment 1 -Strobe 14 Ground 2 -ALF 15 Data 6 3 Data 0 16 Ground 4 -Error 17 Data 7 5 Data 1 18 Ground 6 -Init 19 -ACK 7 Data 2 20 Ground 8 -Scltin 21 Busy 9 Data 3 22 Ground 10 Ground 23 PE 11 Data 4 24 Ground 12 Ground 25 SCLT 13 Data 5 26 Key

19 CHAPTER 3: UEFI BIOS & SOFTWARE 3.1 UEFI BIOS Setup � For better system performance, the UEFI BIOS firmware is being continuously updated. The UEFI BIOS information described below in this manual is for your reference only and the actual UEFI BIOS information and settings on board may be different from this manual � For further information of setting up the UEFI BIOS, please refer to the UEFI BIOS Manual in the Setup DVD. 3.2 BIOS Update There are three ways to update the BIOS: BIOS Update Utility, BIOS Online Update Utility and BIOS Flasher. 1. BIOS Update Utility 1. Installing BIOS Update Utility from the DVD Driver. 2. Download the proper BIOS from www.biostar.com.tw . 3. Open BIOS Update Utility and click the Update BIOS button on the main screen. 4. A warning message will show up to request your agreement to start the BIOS update. Click OK to start the update procedure. 5. Choose the location for your BIOS file in the system. Please select the proper BIOS file, and then click on Open. It will take several minutes, please be patient.

finished, click on OK to reboot the system. 7. While the system boots up and the full screen logo shows up, please press the key to enter BIOS setup. After entering the BIOS setup, please go to the Save & Exit, using the Restore Defaults function to load Optimized Defaults, and select Save Changes and Reset to restart the computer. Then, the BIOS Update is completed. Backup BIOS Click the Backup BIOS button on the main screen for the backup of BIOS, and select a proper location for your backup BIOS file in the system, and click Save.

21 2. Online Update Utility 1. Installing BIOS Update Utility from the DVD Driver. 2. Please make sure the system is connected to the internet before using this function. 3. Open BIOS Update Utility and click the Online Update button on the main screen. 4. An open dialog will show up to request your agreement to start the BIOS update. Click Yes to start the online update procedure. 5. If there is a new BIOS version, the utility will ask you to download it. Click Yes to proceed. 6. After the download is completed, you will be asked to program (update) the BIOS or not. Click Yes to proceed. 7. After the updating process is finished, you will be asked you to reboot the system. Click OK to reboot.

23 6. Select the proper BIOS file, and a message asking if you are sure to flash the BIOS file. Click Yes to start updating BIOS. 7. A dialog pops out after BIOS flash is completed, asking you to restart the system. Press the [Y] key to restart system. 8. While the system boots up and the full screen logo shows up, press key to enter BIOS setup. After entering the BIOS setup, please go to the Save & Exit, using the Restore Defaults function to load Optimized Defaults, and select Save Changes and Reset to restart the computer. Then, the BIOS Update is completed.

appear if the Autorun function has been enabled. 2. Select Software Installation, and then click on the respective software title. 3. Follow the on-screen instructions to complete the installation. Note1: All the information and content about following software are subject to be changed without notice. For better performance, the software is being continuously updated. Note2: The information and pictures described below are for your reference only. The actual information and settings on board may be slightly different from this manual. Launching Software After the installation process is completed, you will see the software icon showing on the desktop. Double-click the icon to launch it. eHot-Line (Optional) eHot-Line is a convenient utility that helps you to contact with our Tech-Support system. This utility will collect the system information which is useful for analyzing the problem you may have encountered, and then send these information to our tech-support department to help you fix the problem. Note: Before you use this utility, please set Outlook Express as your default e-mail client application program. This block will show the information which would be collected in the mail. Provide the e-mail address that you would like to send the copy to. Provide the name of the power supply manufacturer and the model no. Send the mail out. Save these information to a .txt file Exit this dialog. Select your area or the area close to you. * Provide the name of the memory module manufacturer. * Describe condition *of your system. * represents important information that you must provide. Without this information, you may not be able to send out the mail.

25 After filling up this information, click “Send” to send the mail out. A warning dialog would appear asking for your confirmation; click “Send” to confirm or “Do Not Send” to cancel. If you want to save this information to a .txt file, click “Save As…” and then you will see a saving dialog appears asking you to enter file name. Enter the file name and then click “Save”. Your system information will be saved to a .txt file. Open the saved .txt file, you will see your system information including motherboard/BIOS/CPU/video/ device/OS information. This information is also concluded in the sent mail. Note1: We will not share customer’s data with any other third parties, so please feel free to provide your system information while using eHot-Line service. Note2: If you are not using Outlook Express as your default e-mail client application, you may need to save the system information to a .txt file and send the file to our tech support with other e-mail application. Go to the following web http://www.biostar.com.tw/app/en/about/contact.php for getting our contact information.

adjust system volume. With its user-friendly GUI, you can also adjust impedance setting (Low/High Gain) to optimize your headphone performance. � High/Low Gain Switch: Keep the gain switch to low for low impedance headphone and set to high for high impedance headphone. � Mute Button: To disable system sound � Volume Control Knob: The volume can be finely adjusted by turning the knob either clockwise or anti-clockwise to increase or decrease system volume accordingly. � Information Button: Get information of the application � Minimize Button: Minimize the application window to the taskbar � Exit Button: Exit the application Note: 1. Smart EAR is only supported by Windows 7/8 and BIOSTAR Hi-Fi series motherboards. 2. High/Low Gain Switch is only for “Front Panel Audio Header”, please make sure you are connecting your headphone to the front panel I/O.

27 CHAPTER 4: USEFUL HELP 4.1 Driver Installation After you installed your operating system, please insert the Fully Setup Driver DVD into your optical drive and install the driver for better system performance. You will see the following window after you insert the DVD The setup guide will auto detect your motherboard and operating system. Note: If this window didn’t show up after you insert the Driver DVD, please use file browser to locate and execute the file SETUP.EXE under your optical drive. A. Driver Installation To install the driver, please click on the Driver icon. The setup guide will list the compatible driver for your motherboard and operating system. Click on each device driver to launch the installation program. B. Software Installation To install the software, please click on the Software icon. The setup guide will list the software available for your system, click on each software title to launch the installation program. C. Manual Aside from the paperback manual, we also provide manual in the Driver DVD. Click on the Manual icon to browse for available manual. Note: You will need Acrobat Reader to open the manual file. Please download the latest version of Acrobat Reader software from http://get.adobe.com/reader/

Boot Block Beep Codes Number of Beeps Description Continuing Memory sizing error or Memory module not found POST BIOS Beep Codes Number of Beeps Description 1 Success booting. 8 Display memory error (system video adapter) 4.3 Troubleshooting Probable Solution 1. There is no power in the system. Power LED does not shine; the fan of the power supply does not work 2. Indicator light on keyboard does not shine. 1. Make sure power cable is securely plugged in. 2. Replace cable. 3. Contact technical support. System is inoperative. Keyboard lights are on, power indicator lights are lit, and hard drives are running. Using even pressure on both ends of the DIMM, press down firmly until the module snaps into place. System does not boot from a hard disk drive, but can be booted from optical drive. 1. Check cable running from disk to disk controller board. Make sure both ends are securely plugged in; check the drive type in the standard CMOS setup. 2. Backing up the hard drive is extremely important. All hard disks are capable of breaking down at any time. System only boots from an optical drive. Hard disks can be read, applications can be used, but system fails to boot from a hard disk. 1. Back up data and applications files. 2. Reformat the hard drive. Re-install applications and data using backup disks. Screen message shows “Invalid Configuration” or “CMOS Failure.” Review system’s equipment. Make sure correct information is in setup. System cannot boot after user installs a second hard drive. 1. Set master/slave jumpers correctly. 2. Run SETUP program and select correct drive types. Call the drive manufacturers for compatibility with other drives.

29 CPU Overheated If the system shutdown automatically after power on system for seconds, that means the CPU protection function has been activated. When the CPU is over heated, the motherboard will shutdown automatically to avoid a damage of the CPU, and the system may not power on again. In this case, please double check: 1. The CPU cooler surface is placed evenly with the CPU surface. 2. CPU fan is rotated normally. 3. CPU fan speed is fulfilling with the CPU speed. After confirmed, please follow steps below to relief the CPU protection function. 1. Remove the power cord from power supply for seconds. 2. Wait for seconds. 3. Plug in the power cord and boot up the system. Or you can: 1. Clear the CMOS data. (See “Close CMOS Header: JCMOS1” section) 2. Wait for seconds. 3. Power on the system again.

Operating System Supports Windows Vista , Windows 7 and Windows 8. Raid Arrays RAID supports the following types of RAID arrays: RAID 0: RAID 0 defines a disk striping scheme that improves disk read and write times for many applications. RAID 1: RAID 1 defines techniques for mirroring data. RAID 10: RAID 10 combines the techniques used in RAID 0 and RAID 1. RAID 5: RAID 5 provides fault tolerance and better utilization of disk capacity. RAID Definitions RAID 0: The controller “stripes” data across multiple drives in a RAID 0 array system. It breaks up a large file into smaller blocks and performs disk reads and writes across multiple drives in parallel. The size of each block is determined by the stripe size parameter, which you set during the creation of the RAID set based on the system environment. This technique reduces overall disk access time and offers high bandwidth. Features and Benefits ­ Drives: Minimum 2, and maximum is up to 6 or 8. Depending on the platform. ­ Uses: Intended for non-critical data requiring high data throughput, or any environment that does not require fault tolerance. ­ Benefits: provides increased data throughput, especially for large files. No capacity loss penalty for parity. ­ Drawbacks: Does not deliver any fault tolerance. If any drive in the array fails, all data is lost. ­ Fault Tolerance: No. ­ Total Capacity: (Minimal. HDD Capacity) x (Connected HDDs Amount) Block 1 Block 3 Block 5 Block 2 Block 4 Block 6

31 RAID 1: Every read and write is actually carried out in parallel across 2 disk drives in a RAID 1 array system. The mirrored (backup) copy of the data can reside on the same disk or on a second redundant drive in the array. RAID 1 provides a hot-standby copy of data if the active volume or drive is corrupted or becomes unavailable because of a hardware failure. RAID techniques can be applied for high-availability solutions, or as a form of automatic backup that eliminates tedious manual backups to more expensive and less reliable media. Features and Benefits ­ Drives: Minimum 2, and maximum is 2. ­ Uses: RAID 1 is ideal for small databases or any other application that requires fault tolerance and minimal capacity. ­ Benefits: Provides 100% data redundancy. Should one drive fail, the controller switches to the other drive. ­ Drawbacks: Requires 2 drives for the storage space of one drive. Performance is impaired during drive rebuilds. ­ Fault Tolerance: Yes. Block 1 Block 2 Block 3 Block 1 Block 2 Block 3

solution for improved resiliency, performance and rebuild performance. Features and Benefits ­ Drives: Minimum 4, and maximum is 6 or 8, depending on the platform. ­ Benefits: Optimizes for both fault tolerance and performance, allowing for automatic redundancy. May be simultaneously used with other RAID levels in an array, and allows for spare disks. ­ Drawbacks: Requires twice the available disk space for data redundancy, the same as RAID level 1. ­ Fault Tolerance: Yes. Block 1 Block 3 Block 5 Block 2 Block 4 Block 6 Block 1 Block 3 Block 5 Block 2 Block 4 Block 6

33 RAID 5: RAID 5 stripes both data and parity information across three or more drives. It writes data and parity blocks across all the drives in the array. Fault tolerance is maintained by ensuring that the parity information for any given block of data is placed on a different drive from those used to store the data itself. Note: The RAID 5 function is only supported by A85 chipset. Features and Benefits ­ Drives: Minimum 3. ­ Uses: RAID 5 is recommended for transaction processing and general purpose service. ­ Benefits: An ideal combination of good performance, good fault tolerance, and high capacity and storage efficiency. ­ Drawbacks: Individual block data transfer rate same as a single disk. Write performance can be CPU intensive. ­ Fault Tolerance: Yes. Disk 1 DATA 3 PARITY DATA 7 DATA 1 DATA 9 PARITY Disk 2 PARITY DATA 5 DATA 8 DATA 2 PARITY DATA 11 Disk 3 DATA 4 DATA 6 PARITY PARITY DATA 10 DATA 12

AMD Dual Graphics Technology Introduction When user adds a PCIE display adapter, it can be integrated with IGD to show better performance. To make the two video devices work simultaneously and normally, please refer to the following setting. AMD Dual Graphics Requirement � Operating System: Windows Vista / Windows 7 / Windows 8 � Supported Dual Graphics Combinations: AMD Radeon™ Graphics Card A10-Series HD 7660D A8-Series HD7560D A6-Series HD 7540D HD 6670 ● ● HD 6570 ● ● ● HD 6450 ● ● Recommended graphics cards for AMD dual-graphics Note 1: A4-Series products do not support Dual Graphics. Note 2: The information described above in this manual is for your reference only and the actual information and settings on board may be different from this manual. For further AMD Dual Graphics information, please visit the following website: http://www.amd.com

35 AMD Dual Graphics Setup Step 1: Insert Dual Graphics-Ready graphics card into PEX16_1 slot. Step 2: Set the BIOS setting as follows: [Chipset]→[North Bridge]→[GFX Configuration] →[Surround View]→[Enabled] Step 3: Install Driver DVD Chipset Driver, and reboot the system. Activate AMD VISION Engine Control Center to make sure CrossFire has been enabled.

Arabic تﺎﻔﺻاﻮﻤﻟا ةﺪﺣو ةﺪﻋﺎﻗ ﺔﺠﻟﺎﻌﻤﻟا ﺔﻳﺰآﺮﻤﻟا A ﻞﺴﻠﺴﺗ AMD ىد مإ ﻪﻳا ﺞﻟﺎﻌﻤﻟ FM 2 ﺬﺧﺄﻤﻟا ﻢﻴﻤﺼﺗ ﻲﻓ ﺔﻳراﺮﺤﻟا ﺔﻗﺎﻄﻠﻟ ﻰﺼﻗﻷا ﺪﺤﻟا ﺞﻟﺎﻌﻤﻟا ) :( thermal design power – TDP 100طاو . * ﻊﻗﻮﻤﻟا ﻰﻟإ عﻮﺟﺮﻟا ﻰﺟﺮﻳ www.biostar.com.tw ﺞﻟﺎﻌﻤﻟا ﻢﻋد ﺔﻤﺋﺎﻘﻟ .CPU ﺔﻋﻮﻤﺠﻣ ﺢﺋاﺮﺸﻟا AMD A85 FCH (Hi-Fi A85S3) AMD A75 FCH (Hi-Fi A75S3) AMD A55 FCH (Hi-Fi A55S3) ةﺮآاﺬﻟا يد ﺔﺟودﺰﻣ ةﺎﻨﻗ ﻢﻋﺪﺗ .يد .را . 1866 / 1600 / 1333 / 1066 / 800 DDR3 2 x يد .يد .را . DDR3 ﺔﺟودﺰﻤﻟا ةﺮآاﺬﻟا تﺎﺤﺘﻓ DIMMﺤﺘﺗ ،ﻰﺼﻗأ ﺪﺤآ ﻞﻤ 32ةﺮآاذ ﺖﻳﺎﺑﺎﺠﻴﺟ 512 ECC نود ﻞﻤﺤﺘﺗ DIMM ﺔﺟودﺰﻣ ﺔﺤﺘﻓ ﻞآ ﺖﻳﺎﺑ ﺎﺠﻴﻣ/1/2/4/8/16يد ﺖﻳﺎﺑﺎﺠﻴﺟ .يد . را DDR3 * ﻊﻗﻮﻤﻟا ﻰﻟإ عﻮﺟﺮﻟا ﻰﺟﺮﻳ www.biostar.com.tw ةﺮآاﺬﻟا ﻢﻋد ﺔﻤﺋﺎﻘﻟ. ﻦﻳﺰﺨﺘﻟا FCH A85/A75/A55 AMD ىد مإ ﻪﻳا ﺪﻳار ﻞﻤﺤﺘﺗ / 5 RAID (FCH A85)AHCI / 10 / 1 / 0 ﺪﻳار ﻞﻤﺤﺘﺗ RAID (FCH A75/A55)AHCI / 10 / 1 / 0 ﺔﻴﻠﺤﻣ ﺔﻜﺒﺷ LAN REALTEK RTL 8111F ل تر ﻚﻴﺘﻟﺎﻴﻳر 1000 / 100 / 10 ﺖﻳﺎﺑﺎﺠﻴﻣ / ﻒﺼﻨﻟا ، ﻲﺋﺎﻘﻠﺗ ﺪﻳﺪﺤﺗ ، ﺔﻴﻧﺎﺜﻟا /ﺔﺟودﺰﻤﻟا ىﻮﺼﻘﻟا ةرﺪﻘﻟا ﻲﺗﻮﺼﻟا ﺰﻴﻣﺮﺘﻟا ALC662 5.1ﺔﻗﺪﻟا ﺔﻴﻟﺎﻋ تاﻮﻨﻗ , Biostar Hi-Fi ﺘﻣ ﻞﻗﺎﻧ ﻞﺴﻠﺴ USB مﺎﻋ FCH AMD A85/A75 ىد مإ ﻪﻳ ﺬﻓﺎﻨﻣ 6 xمﺎﻋ ﻞﺴﻠﺴﺘﻣ ﻞﻗﺎﻧ 2 ) 2.0 USB ﺔﻴﻔﻠﺨﻟا جرﺎﺨﻤﻟاو ﻞﺧاﺪﻤﻟا ﻲﻓ و 4 ﻲﻠﺧاﺪﻟا عزﻮﻤﻟا لﻼﺧ ﻦﻣ( ﺬﻓﺎﻨﻣ4 x 2 ) 3.0 USB مﺎﻋ ﻞﺴﻠﺴﺘﻣ ﻞﻗﺎﻧ و ﺔﻴﻔﻠﺨﻟا جرﺎﺨﻤﻟاو ﻞﺧاﺪﻤﻟا ﻲﻓ 2 ﻲﻠﺧاﺪﻟا عزﻮﻤﻟا لﻼﺧ ﻦﻣ ( FCH AMD A55 ىد مإ ﻪﻳ ﺎﻨﻣ ﺬﻓ8 x 4 ) 2.0 USB مﺎﻋ ﻞﺴﻠﺴﺘﻣ ﻞﻗﺎﻧ و ﺔﻴﻔﻠﺨﻟا جرﺎﺨﻤﻟاو ﻞﺧاﺪﻤﻟا ﻲﻓ 4 ﻲﻠﺧاﺪﻟا عزﻮﻤﻟا لﻼﺧ ﻦﻣ ( ﻊﺳﻮﺘﻟا تﺎﺤﺘﻓ 1 x ﺔﻴﻓﺎﺿﻹا تﺎﻘﺤﻠﻤﻟا ﺬﻔﻨﻣ ﺔﺤﺘﻓ PCI 1 x2.0 PCIe ﺔﻴﻓﺎﺿﻹا تﺎﻘﺤﻠﻤﻟا ﺬﻔﻨﻣ ﺔﺤﺘﻓ x 1 1 xﺔﺤﺘﻓ ﺔﻴﻓﺎﺿﻹا تﺎﻘﺤﻠﻤﻟا ﺬﻔﻨﻣ 16 x 2.0 PCIe ﻞﺧاﺪﻤﻟا جرﺎﺨﻤﻟاو ﺔﻴﻔﻠﺨﻟا Hi-Fi A85S3 1 x PS/2ةرﺎﻔﻟا x 1 PS/2تﻮﻴﺒﻤﻜﻠﻟ ﺢﻴﺗﺎﻔﻤﻟا ﺔﺣﻮﻟ دﺪﻋ ﻞﻴﺻﻮﺗ ﺔﺤﺘﻓ1 x ضﺮﻌﻟا ﺔﻣﻮﻈﻨﻣ VGA ﻲﺋﺮﻤﻟا دﺪﻋ ﻞﻴﺻﻮﺗ ﺔﺤﺘﻓ1 x ﺔﻴﻤﻗر ﺔﻴﺋﺮﻣ ﺔﻬﺟاو HDMI دﺪﻋ ﻞﻴﺻﻮﺘﻟ ﺔﺤﺘﻓ1 x LAN ﺔﻴﻠﺤﻤﻟا ﺔﻜﺒﺸﻟا دﺪﻋ ﻞﻴﺻﻮﺗ ﺔﺤﺘﻓ2 x مﺎﻋ ﻞﺴﻠﺴﺘﻣ ﻞﻗﺎﻧ 2.0 USB دﺪﻋ ﻞﻴﺻﻮﺗ ﺔﺤﺘﻓ2 xﻞﻗﺎﻧ مﺎﻋ ﻞﺴﻠﺴﺘﻣ 3.0 USB دﺪﻋ ﻞﻴﺻﻮﺗ ﺔﺤﺘﻓ3 xتﻮﺼﻠﻟ كﺎﺟ Hi-Fi A75S3 1 x PS/2ةرﺎﻔﻟا x 1 PS/2تﻮﻴﺒﻤﻜﻠﻟ ﺢﻴﺗﺎﻔﻤﻟا ﺔﺣﻮﻟ دﺪﻋ ﻞﻴﺻﻮﺗ ﺔﺤﺘﻓ1 x ضﺮﻌﻟا ﺔﻣﻮﻈﻨﻣ VGA ﻲﺋﺮﻤﻟا دﺪﻋ ﻞﻴﺻﻮﺗ ﺔﺤﺘﻓ1 x ﺔﻴﻤﻗر ﺔﻴﺋﺮﻣ ﺔﻬﺟاو DVI دﺪﻋ ﻞﻴﺻﻮﺘﻟ ﺔﺤﺘﻓ1 x LAN ﺔﻴﻠﺤﻤﻟا ﺔﻜﺒﺸﻟا دﺪﻋ ﻞﻴﺻﻮﺗ ﺔﺤﺘﻓ2 xﻧ مﺎﻋ ﻞﺴﻠﺴﺘﻣ ﻞﻗﺎ 2.0 USB دﺪﻋ ﻞﻴﺻﻮﺗ ﺔﺤﺘﻓ2 x مﺎﻋ ﻞﺴﻠﺴﺘﻣ ﻞﻗﺎﻧ 3.0 USB دﺪﻋ ﻞﻴﺻﻮﺗ ﺔﺤﺘﻓ3 xتﻮﺼﻠﻟ كﺎﺟ Hi-Fi A55S3 1 x PS/2ةرﺎﻔﻟا x 1 PS/2تﻮﻴﺒﻤﻜﻠﻟ ﺢﻴﺗﺎﻔﻤﻟا ﺔﺣﻮﻟ دﺪﻋ ﻞﻴﺻﻮﺗ ﺔﺤﺘﻓ1 x ضﺮﻌﻟا ﺔﻣﻮﻈﻨﻣ VGA ﻲﺋﺮﻤﻟا دﺪﻋ ﻞﻴﺻﻮﺗ ﺔﺤﺘﻓ1 x ﺔﻴﻤﻗر ﺔﻴﺋﺮﻣ ﺔﻬﺟاو DVI ﺪﻋ ﻞﻴﺻﻮﺘﻟ ﺔﺤﺘﻓ د1 x LAN ﺔﻴﻠﺤﻤﻟا ﺔﻜﺒﺸﻟا دﺪﻋ ﻞﻴﺻﻮﺗ ﺔﺤﺘﻓ4 x مﺎﻋ ﻞﺴﻠﺴﺘﻣ ﻞﻗﺎﻧ 2.0 USB دﺪﻋ ﻞﻴﺻﻮﺗ ﺔﺤﺘﻓ3 x تﻮﺼﻠﻟ كﺎﺟ

37 تﺎﻔﺻاﻮﻤﻟا ﻞﺧاﺪﻤﻟا جرﺎﺨﻤﻟاو ﺔﻴﻠﺧاﺪﻟا Hi-Fi A85S3 ﺔﻠﺻو6 6 x SATA ﺖﻳﺎﺑﺎﺠﻴﺟ / ﺔﻴﻧﺎﺜﻟا USB مﺎﻋ ﻞﺴﻠﺴﺘﻣ ﻞﻗﺎﻧ x عزﻮﻣ2 2.0 USB مﺎﻋ ﻞﺴﻠﺴﺘﻣ ﻞﻗﺎﻧ x1 عزﻮﻣ 3.0 ﺔﻗﺎﻄﻠﻟ ﺔﻠﺻﻮﻣ1 x 4ﺲﻴﺑﺎﺑد ﺔﻗﺎﻄﻠﻟ ﺔﻠﺻو1 x 24سﻮﺑد ﺔﻠﺻو1 x ةﺪﺣو ﺪﻳﺮﺒﺗ ﺔﺣوﺮﻣ ﺔﻳﺰآﺮﻤﻟا ﺔﺠﻟﺎﻌﻤﻟا ﺔﻠﺻو x1ﺔﻣﻮﻈﻨﻤﻟا ﺪﻳﺮﺒﺗ حواﺮﻣ عزﻮﻣ1 xﺔﻴﻣﺎﻣﻷا ﺔﺣﻮﻠﻟا عزﻮﻣ1 xﻲﻣﺎﻣﻷا تﻮﺼﻟا عزﻮﻣ1 xﺮﺷﺎﺒﻣ سﻮﻤﻴﺳ عزﻮﻣ1 xﺔﻌﺑﺎﻄﻠﻟ ﺔﺤﺘﻓ x عزﻮﻣ1 ﺔﻴﻠﺴﻠﺴﺗ ﺔﺤﺘﻓ Hi-Fi A75S3 ﺔﻠﺻو6 6 x SATA ﺖﻳﺎﺑﺎﺠﻴﺟ / اﺔﻴﻧﺎﺜﻟ USB مﺎﻋ ﻞﺴﻠﺴﺘﻣ ﻞﻗﺎﻧ x عزﻮﻣ2 2.0 USB مﺎﻋ ﻞﺴﻠﺴﺘﻣ ﻞﻗﺎﻧ x1 عزﻮﻣ 3.0 ﺔﻗﺎﻄﻠﻟ ﺔﻠﺻﻮﻣ1 x 4ﺲﻴﺑﺎﺑد ﺔﻗﺎﻄﻠﻟ ﺔﻠﺻو1 x 24سﻮﺑد ﺔﻠﺻو1 x ةﺪﺣو ﺪﻳﺮﺒﺗ ﺔﺣوﺮﻣ ﺔﻳﺰآﺮﻤﻟا ﺔﺠﻟﺎﻌﻤﻟا ﺔﻠﺻو x1ﺔﻣﻮﻈﻨﻤﻟا ﺪﻳﺮﺒﺗ حواﺮﻣ عزﻮﻣ1 xﺔﻴﻣﺎﻣﻷا ﺔﺣﻮﻠﻟا عزﻮﻣ1 xﻲﻣﺎﻣﻷا تﻮﺼﻟا عزﻮﻣ1 xﻣ سﻮﻤﻴﺳ ﺮﺷﺎﺒ عزﻮﻣ1 xﺔﻌﺑﺎﻄﻠﻟ ﺔﺤﺘﻓ x عزﻮﻣ1 ﺔﻴﻠﺴﻠﺴﺗ ﺔﺤﺘﻓ Hi-Fi A55S3 ﺔﻠﺻو6 3 x SATA ﺖﻳﺎﺑﺎﺠﻴﺟ / ﺔﻴﻧﺎﺜﻟا USB مﺎﻋ ﻞﺴﻠﺴﺘﻣ ﻞﻗﺎﻧ x عزﻮﻣ2 2.0 ﺔﻗﺎﻄﻠﻟ ﺔﻠﺻﻮﻣ1 x 4ﺲﻴﺑﺎﺑد ﺔﻗﺎﻄﻠﻟ ﺔﻠﺻو1 x 24سﻮﺑد ﺔﻠﺻو1 x ةﺪﺣو ﺪﻳﺮﺒﺗ ﺔﺣوﺮﻣ ﺔﻳﺰآﺮﻤﻟا ﺔﺠﻟﺎﻌﻤﻟا ﺔﻠﺻو x1ﺔﻣﻮﻈﻨﻤﻟا ﺪﻳﺮﺒﺗ حواﺮﻣ عزﻮﻣ1 xﺔﻴﻣﺎﻣﻷا ﺔﺣﻮﻠﻟا عزﻮﻣ1 xﻲﻣﺎﻣﻷا تﻮﺼﻟا عزﻮﻣ1 xﺮﺷﺎﺒﻣ سﻮﻤﻴﺳ عزﻮﻣ1 xﺔﻌﺑﺎﻄﻠﻟ ﺔﺤﺘﻓ x عزﻮﻣ1 ﺔﻴﻠﺴﻠﺴﺗ ﺔﺤﺘﻓ ﻞﻜﺸﻟا ﻞﻣﺎﻋ ﺔﻣﺪﻘﺘﻤﻟا ﺎﻴﺟﻮﻟﻮﻨﻜﺘﻟا دﺪﻣ ﻞﻜﺷ ﻞﻣﺎﻋ 191 x ﻢﻣ 244 ، microATX ﻢﻣ ﻞﻴﻐﺸﺘﻟا ﺔﻤﻈﻧأ ﺔﻣﻮﻋﺪﻤﻟا / windows xp ﻲﺑ ﺲآإ زوﺪﻨﻳو ﺎﺘﺴﻴﻓ زوﺪﻨﻳو / زوﺪﻨﻳو7 / و زوﺪﻨﻳ8 رﺎﺘﺳﻮﻴﺑ BIOSTARرﺎﻈﻧأ نوﺪﺑ وأ ﻊﻣ ﻞﻴﻐﺸﺗ مﺎﻈﻧ يﻷ ﻢﻋﺪﻟا ﺔﻟزأ وأ ﺔﻓﺎﺿإ ﻖﺤﺑ ﻆﻔﺘﺤﺗ .

Enveloppe thermique Unité Centrale maximum : 100Watt * Veuillez vous reporter à www.biostar.com.tw pour la liste des supports modèles d'Unité Centrale. Jeu de puces AMD A85 FCH (Hi-Fi A85S3) AMD A75 FCH (Hi-Fi A75S3) AMD A55 FCH (Hi-Fi A55S3) Mémoire Supporte mémoire DDR3 double canal 800/ 1066/ 1333/ 1600/ 1866 Banc de mémoire 2 x DDR3 DIMM, Supporte max. jusqu’à une mémoire de 32 GB Chaque module DIMM supporte module DDR3 non-ECC 512MB/ 1/ 2/ 4/ 8/ 16 GB * Veuillez vous reporter à www.biostar.com.tw pour la liste des soutien de la mémoire. Stockage AMD A85/A75/A55 FCH Supporte système RAID 0,1,10, 5 & AHCI (A85 FCH) Supporte système RAID 0,1,10 & AHCI (A75/A55 FCH) Réseau local Realtek RTL 8111F 10/ 100/ 1000 Mb/s auto négociation, capacité bidirectionnelle à l'alternat / bidirectionnelle simultanée Codec audio ALC662 Canaux 5.1, écoute audio de haute définition, Biostar Hi-Fi USB AMD A85/A75 FCH Port 6x USB 2.0 (2 sur les I/O arrières et 4 en interne) Port 4x USB 3.0 (2 sur les I/O arrières et 2 en interne) AMD A55 FCH Port 8x USB 2.0 (4 sur les I/O arrières et 4 en interne) Connecteur d’extension 1x Fente PCI 1x PCIe 2.0 x1 Fente 1x PCIe 2.0 x16 Fente I/O arrirèes Hi-Fi A85S3: 1x PS/2 Clavier 1x PS/2 Souris 1x Port VGA 1x Port HDMI 1x port LAN 2x Port USB 2.0 2x Port USB 3.0 3x entrées audio Hi-Fi A75S3: 1x PS/2 Clavier 1x PS/2 Souris 1x Port VGA 1x Port DVI 1x port LAN 2x Port USB 2.0 2x Port USB 3.0 3x entrées audio Hi-Fi A55S3: 1x PS/2 Clavier 1x PS/2 Souris 1x Port VGA 1x Port DVI 1x port LAN 4x Port USB 2.0 3x entrées audio

39 Spécifications I/O en interne Hi-Fi A85S3: 6x Connecteur SATA 6.0Gb/s 2x embases USB 2.0 1x embases USB 3.0 1x 4-Broche de carte 1x 24-Broche de carte 1x Connecteur ventilateur unité centrale 1x Connecteur ventilateur système 1x Fiche panneau avant 1x Fiche audio avant 1x Fiche mémoire CMOS vide 1x Embase port imprimante 1x Embase port série Hi-Fi A75S3: 6x Connecteur SATA 6.0Gb/s 2x embases USB 2.0 1x embases USB 3.0 1x 4-Broche de carte 1x 24-Broche de carte 1x Connecteur ventilateur unité centrale 1x Connecteur ventilateur système 1x Fiche panneau avant 1x Fiche audio avant 1x Fiche mémoire CMOS vide 1x Embase port imprimante 1x Embase port série Hi-Fi A55S3: 6x Connecteur SATA 3.0Gb/s 2x embases USB 2.0 1x 4-Broche de carte 1x 24-Broche de carte 1x Connecteur ventilateur unité centrale 1x Connecteur ventilateur système 1x Fiche panneau avant 1x Fiche audio avant 1x Fiche mémoire CMOS vide 1x Embase port imprimante 1x Embase port série Facteur d'encombrement Facteur d'encombrement microATX, 244 mm x 191 mm Support SE Windows XP / Vista / 7/ 8 Biostar se réserve le droit d’ajouter ou d'enlever le support pour toute SE avec ou sans préavis.

Maximale CPU TDP (Thermal Design Power): 100 Watt * Bitte konsultieren Sie www.biostar.com.tw für CPU-Unterstützungsliste Chipset AMD A85 FCH (Hi-Fi A85S3) AMD A75 FCH (Hi-Fi A75S3) AMD A55 FCH (Hi-Fi A55S3) Festplattenspeic her Unterstützt zweikanaliges DDR3 800/ 1066/ 1333/ 1600/ 1866 2 x DDR3 DIMM-SpeicherSlot, Max. Uterstützung bis zu 32 GB-Speicher Jedes DIMM unterstützt nicht-ECC 512MB/ 1/ 2/ 4/ 8/ 16 GB DDR3-Module * Bitte konsultieren Sie www.biostar.com.tw für für Speicherunterstützung Liste. Arbeitsspeicher AMD A85/A75/A55 FCH Unterstützt RAID 0,1,10, 5 & AHCI (A85 FCH) Unterstützt RAID 0,1,10 & AHCI (A75/A55 FCH) LAN Realtek RTL 8111F 10/ 100/ 1000 Mb Auto-Negotiation, Halb- / Voll-Duplex-fähig Audio-Codec ALC662 5.1 Kanäle, HD-Audio, Biostar Hi-Fi USB AMD A85/A75 FCH: 6x USB 2.0-Port (2 hintere I/Os und 4 via interne Header) 4x USB 3.0-Port (2 hintere I/Os und 2 via interne Header) AMD A55 FCH: 8x USB 2.0-Port (4 hintere I/Os und 4 via interne Header) Erweiterungsan schlüsse 1x PCI-Slot 1x PCIe 2.0 x1-Slot 1x PCIe 2.0 x16-Slot Hintere I/Os Hi-Fi A85S3: 1x PS/2-Maus 1x PS/2-Keyboard 1x VGA-Port 1x HDMI -Port 1x LAN-Port 2x USB 2.0-Port 2x USB 3.0-Port 3x Audio Jack Hi-Fi A75S3: 1x PS/2-Maus 1x PS/2-Keyboard 1x VGA-Port 1x DVI-Port 1x LAN-Port 2x USB 2.0-Port 2x USB 3.0-Port 3x Audio Jack Hi-Fi A55S3: 1x PS/2-Maus 1x PS/2-Keyboard 1x VGA-Port 1x DVI-Port 1x LAN-Port 4x USB 2.0-Port 3x Audio Jack

41 Spezifikationen Interne I/Os Hi-Fi A85S3: 6x SATA 6.0Gb/s-Verbinung 2x USB 2.0-Header 1x USB 3.0-Header 1x 4-Pin-Stromverbindung 1x 24-Pin-Stromverbindung 1x CPU-Ventilatorverbindung 1x System-Ventilatorverbindung 1x Header für Frontpanel 1x Header für Frontaudio 1x Header für klares CMOS 1x Header für Druckerport 1x Serieller Port-Header Hi-Fi A75S3: 6x SATA 6.0Gb/s-Verbinung 2x USB 2.0-Header 1x USB 3.0-Header 1x 4-Pin-Stromverbindung 1x 24-Pin-Stromverbindung 1x CPU-Ventilatorverbindung 1x System-Ventilatorverbindung 1x Header für Frontpanel 1x Header für Frontaudio 1x Header für klares CMOS 1x Header für Druckerport 1x Serieller Port-Header Hi-Fi A55S3: 6x SATA 3.0Gb/s-Verbinung 2x USB 2.0-Header 1x 4-Pin-Stromverbindung 1x 24-Pin-Stromverbindung 1x CPU-Ventilatorverbindung 1x System-Ventilatorverbindung 1x Header für Frontpanel 1x Header für Frontaudio 1x Header für klares CMOS 1x Header für Druckerport 1x Serieller Port-Header Formfaktor microATX Formfaktor, 244 mm x 191 mm OS-Unterstützu ng Windows XP / Vista / 7/ 8 Biostar reserves the right to add or remove support for any OS with or without notice.

Alimentazione di Proiezione Termico (TDP – Thermal Design Power): 100Watt * Si prega di consultare www.biostar.com.tw per la lista di supporto del processore. Tipo scheda AMD A85 FCH (Hi-Fi A85S3) AMD A75 FCH (Hi-Fi A75S3) AMD A55 FCH (Hi-Fi A55S3) Memoria Supporta DDR3 800/ 1066/ 1333/ 1600/ 1866 Doppio Canale 2 x DDR3 DIMM Slot di Memoria Supporta fino a 32 GB Memoria Ogni DIMM supporta non-ECC 512MB/ 1/ 2/ 4/ 8/ 16 GB DDR3 moduli * Si prega di consultare www.biostar.com.tw per la lista di supporto del memoria. Memorizzazione AMD A85/A75/A55 FCH Supporta RAID 0,1,10, 5 & AHCI (A85 FCH) Supporta RAID 0,1,10 & AHCI (A75/A55 FCH) Catena Realtek RTL 8111F 10/ 100/ 1000 Mb auto negoziazione, capacita di duplex Meta / Completo Codec Audio ALC662 Canali Audio di Alta Definizione 5.1, Biostar Hi-Fi USB Piattaforma AMD A85/A75 FCH: Slot 6x USB 2.0 (2 nei ingressi/ uscite posteriore e 4 da distributori interni) Slot 4x USB 3.0 (2 nei ingressi/ uscite posteriore e 2 da distributori interni) Piattaforma AMD A55 FCH: Slot 8x USB 2.0 (4 nei ingressi/ uscite posteriore e 4 da distributori interni) Slot di espansione Slot 1x PCI Slot 1x PCIe 2.0 x1 Slot 1x PCIe 2.0 x16 Ingressi/ Uscite Posteriore Hi-Fi A85S3: Mouse 1x PS/2 Tastiera 1x PS/2 Slot 1x VGA Slot 1x HDMI Slot 1x LAN Slot 2x USB 2.0 Slot 2x USB 3.0 Jack audio 3x Hi-Fi A75S3: Mouse 1x PS/2 Tastiera 1x PS/2 Slot 1x VGA Slot 1x DVI Slot 1x LAN Slot 2x USB 2.0 Slot 2x USB 3.0 Jack audio 3x Hi-Fi A55S3: Mouse 1x PS/2 Tastiera 1x PS/2 Slot 1x VGA Slot 1x DVI Slot 1x LAN Slot 4x USB 2.0 Jack audio 3x

43 Specificazioni Ingressi/ Uscite Interni Hi-Fi A85S3: Connettore 6x SATA 6.0Gb/s Distributore 2x USB 2.0 Distributore 1x USB 3.0 Connettore con 4 pin x1 Connettore con 24 pin x1 Connettore Ventilatore processore x1 Connettore Ventilatore Sistema x1 Distributore Pannello Frontale x1 Distributore Audio Frontale x1 Distributore CMOS Diretto x1 Distributore Slot Stampante x1 Distributore Slot Serie x1 Hi-Fi A75S3: Connettore 6x SATA 6.0Gb/s Distributore 2x USB 2.0 Distributore 1x USB 3.0 Connettore con 4 pin x1 Connettore con 24 pin x1 Connettore Ventilatore processore x1 Connettore Ventilatore Sistema x1 Distributore Pannello Frontale x1 Distributore Audio Frontale x1 Distributore CMOS Diretto x1 Distributore Slot Stampante x1 Distributore Slot Serie x1 Hi-Fi A55S3: Connettore 6x SATA 3.0Gb/s Distributore 2x USB 2.0 Connettore con 4 pin x1 Connettore con 24 pin x1 Connettore Ventilatore processore x1 Connettore Ventilatore Sistema x1 Distributore Pannello Frontale x1 Distributore Audio Frontale x1 Distributore CMOS Diretto x1 Distributore Slot Stampante x1 Distributore Slot Serie x1 Fattore di Forma Fattore di Forma microATX, 244 mm x 191 mm Supporto SO Windows XP / Vista / 7/ 8 Biostar si riserva il diritto di aggiungere o ritirare il supporto per qualsiasi SO con o senza preavviso.

最大 CPU TDP （Thermal Design Power 最大放熱量）:100 W *CPU サポート リストについては、www.biostar.com.twを参照してください。 チップセット AMD A85 FCH (Hi-Fi A85S3) AMD A75 FCH (Hi-Fi A75S3) AMD A55 FCH (Hi-Fi A55S3) メモリ デュアルチャンネル DDR3 800/ 1066/ 1333/ 1600/ 1866 をサポート 2 x DDR3 DIMM メモリ スロット、 最大 32 GB メモリまでサポート 各 DIMM は、 非-ECC 512MB/ 1/ 2/ 4/ 8/ 16 GB DDR3 モジュールをサポートしてい ます *サポートされているメモリのリストについては、www.biostar.com.twを参照してく ださい。 保存スペース AMD A85/A75/A55 FCH RAID 0,1,10, 5 & AHCI のサポート (A85 FCH) RAID 0,1,10 & AHCI のサポート (A75/A55 FCH) LAN Realtek RTL 8111F 10/ 100/ 1000 Mb/s オートネゴーシエーション、半/全 二重通信 オーディオ コーデ ック ALC662 5.1 チャンネル, ハイ デフィニション オーディオ, Biostar Hi-Fi USB AMD A85/A75 FCH: 6x USB 2.0 ポート (後部 I/O に2つ 及び 内蔵ヘッダー経由に4つ) 4x USB 3.0 ポート (後部 I/O に2つ 及び 内蔵ヘッダー経由に2つ) AMD A55 FCH: 8x USB 2.0 ポート (後部 I/O に4つ 及び 内蔵ヘッダー経由に4つ) 拡張スロット 1x PCI スロット 1x PCIe 2.0 x1 スロット 1x PCIe 2.0 x16 スロット 後部 I/O Hi-Fi A85S3: 1x PS/2 キーボード 1x PS/2 マウス 1x VGA ポート 1x HDMI ポート 1x LAN ポート 2x USB 2.0 ポート 2x USB 3.0 ポート 3x オーディオ ジャック Hi-Fi A75S3: 1x PS/2 キーボード 1x PS/2 マウス 1x VGA ポート 1x DVI ポート 1x LAN ポート 2x USB 2.0 ポート 2x USB 3.0 ポート 3x オーディオ ジャック Hi-Fi A55S3: 1x PS/2 キーボード 1x PS/2 マウス 1x VGA ポート 1x DVI ポート 1x LAN ポート 4x USB 2.0 ポート 3x オーディオ ジャック

45 仕様 内蔵 I/O Hi-Fi A85S3: 6x SATA 6.0Gb/s コネクタ 2x USB 2.0 ヘッダー 1x USB 3.0 ヘッダー 1x 4-Pin パワー コネクタ 1x 24-Pin パワー コネクタ 1x CPU ファン コネクタ 1x システム ファン コネクタ 1x フロント パネル ヘッダー 1x フロント オーディオ ヘッ ダー 1x クリア CMOS ヘッダー 1x プリンター ポート ヘッダ ー 1x シリアル ポート ヘッダー Hi-Fi A75S3: 6x SATA 6.0Gb/s コネクタ 2x USB 2.0 ヘッダー 1x USB 3.0 ヘッダー 1x 4-Pin パワー コネクタ 1x 24-Pin パワー コネクタ 1x CPU ファン コネクタ 1x システム ファン コネクタ 1x フロント パネル ヘッダー 1x フロント オーディオ ヘッ ダー 1x クリア CMOS ヘッダー 1x プリンター ポート ヘッダ ー 1x シリアル ポート ヘッダー Hi-Fi A55S3: 6x SATA 3.0Gb/s コネクタ 2x USB 2.0 ヘッダー 1x 4-Pin パワー コネクタ 1x 24-Pin パワー コネクタ 1x CPU ファン コネクタ 2x システム ファン コネクタ 1x フロント パネル ヘッダー 1x フロント オーディオ ヘッ ダー 1x クリア CMOS ヘッダー 1x プリンター ポート ヘッダ ー 1x シリアル ポート ヘッダー フォーム ファクタ microATX フォーム ファクタ、244 mm x 191 mm サポート OS Windows XP / Vista / 7/ 8 Biostar には、通知なしでサポート OS を変更する権限があります。

Moc Wydzielanego Ciepła (TDP - Thermal Design Power): 100Watt * Proszę sprawdzić listę obsługiwanych procesorów na stronie internetowej www.biostar.com.tw Rodzaj płyty AMD A85 FCH (Hi-Fi A85S3) AMD A75 FCH (Hi-Fi A75S3) AMD A55 FCH (Hi-Fi A55S3) Pamięć Obsługa pamięci DDR3 800/ 1066/ 1333/ 1600/ 1866 Dwukanałowa 2 x DDR3 DIMM Pamięć Gniazda procesora (Slot), Maksymalna wielkość pamięci 32 GB Każdy DIMM obsługuje jeden moduł non-ECC 512MB/ 1/ 2/ 4/ 8/ 16 GB DDR3 * Proszę sprawdzić listę obsługiwanych pamięć na stronie internetowej www.biostar.com.tw Przechowywanie AMD A85/A75/A55 FCH Obsługa RAID 0,1,10, 5 & AHCI (A85 FCH) Obsługa RAID 0,1,10 & AHCI (A75/A55 FCH) LAN Układ RTL 8111F 10/ 100/ 1000 Mb auto negocjacja, pojemność dupleks Połowe / Pełny Codec Audio ALC662 Kanały Audio wysokiej Definicji 5.1, Biostar Hi-Fi USB Płyta AMD A85/A75 FCH: 6 x złącza USB 2.0 (2 przez tylne porty wejścia/ wyjścia oraz 4 przez wewnętrzne porty) 4 x złącza USB 3.0 (2 przez tylne porty wejścia/ wyjścia oraz 2 przez wewnętrzne porty) Płyta AMD A55 FCH: 8 x złącza USB 2.0 (4 przez tylne porty wejścia/ wyjścia oraz 4 przez wewnętrzne porty) Złącza rozszerzeń złącza 1x PCI (Slot) złącza 1x PCIe 2.0 x1 (Slot) złącza 1x PCIe 2.0 x16 (Slot) Tylne porty wejścia/ wyjścia Hi-Fi A85S3: Myszka 1x PS/2 Klawiatura 1x PS/2 Port 1x VGA Port 1x HDMI Port 1x LAN Porty 2x USB 2.0 Porty 2x USB 3.0 Porty audio 3x Hi-Fi A75S3: Myszka 1x PS/2 Klawiatura 1x PS/2 Port 1x VGA Port 1x DVI Port 1x LAN Porty 2x USB 2.0 Porty 2x USB 3.0 Porty audio 3x Hi-Fi A55S3: Myszka 1x PS/2 Klawiatura 1x PS/2 Port 1x VGA Port 1x DVI Port 1x LAN Porty 4x USB 2.0 Porty audio 3x

47 Specyfikacje techniczne Wewnętrzne porty wejścia/ wyjścia Hi-Fi A85S3: Złącza 6x SATA 6.0Gb/s Złącza 2x USB 2.0 Złącza 1x USB 3.0 Złącza 4 pionowe x 1 Złącza 24 pionowe x 1 Złącze wentylatora CPU x 1 Złącze wentylatora obudowy x 1 Złącze przedniego panelu x1 Złącze audio przedniego panelu x1 Złącze bezpośrednie CMOS x1 Złącze port drukarki x1 Port szeregowy x1 Hi-Fi A75S3: Złącza 6x SATA 6.0Gb/s Złącza 2x USB 2.0 Złącza 1x USB 3.0 Złącza 4 pionowe x 1 Złącza 24 pionowe x 1 Złącze wentylatora CPU x 1 Złącze wentylatora obudowy x 1 Złącze przedniego panelu x1 Złącze audio przedniego panelu x1 Złącze bezpośrednie CMOS x1 Złącze port drukarki x1 Port szeregowy x1 Hi-Fi A55S3: Złącza 6x SATA3.0Gb/s Złącza 2x USB 2.0 Złącza 4 pionowe x 1 Złącza 24 pionowe x 1 Złącze wentylatora CPU x 1 Złącze wentylatora obudowy x 1 Złącze przedniego panelu x1 Złącze audio przedniego panelu x1 Złącze bezpośrednie CMOS x1 Złącze port drukarki x1 Port szeregowy x1 Obudowa Obudowa microATX, 244 mm x 191 mm Obsługa OS Windows XP / Vista / 7/ 8 Biostar zastrzega sobie prawo do dodania lub wycofania obsługi dla OS, z wypowiedzeniem lub bez wypowiedzenia.

Alimentação de Design Térmico (TDP – Thermal Design Power): 100Watt * Por favor consulte www.biostar.com.tw para obter uma lista de suporte do processador. Tipo Placa Mãe AMD A85 FCH (Hi-Fi A85S3) AMD A75 FCH (Hi-Fi A75S3) AMD A55 FCH (Hi-Fi A55S3) Memória Suporta DDR3 800/ 1066/ 1333/ 1600/ 1866 Canal Duplo 2 x DDR3 DIMM Slot de memória Suporta até 32 GB Memória Cada DIMM suporta non-ECC 512MB/ 1/ 2/ 4/ 8/ 16 GB DDR3 módulo * Por favor consulte www.biostar.com.tw para obter uma lista de suporte do memória. Armazenamento AMD A85/A75/A55 FCH Suporta RAID 0,1,10, 5 & AHCI (A85 FCH) Suporta RAID 0,1,10 & AHCI (A75/A55 FCH) LAN Realtek RTL 8111F 10/ 100/ 1000 Mb auto negociação, capacidade duplex Metade / Cheio Codec de Audio ALC662 Canais de Áudio de Alta Definição 5.1, Biostar Hi-Fi USB Plataforma AMD A85/A75 FCH: Porta 6x USB 2.0 (2 nas entradas/saídas traseiras e 4 pelos Dispositivos internos) Porta 4x USB 3.0 (2 nas entradas/saídas traseiras e 2 pelos Dispositivos internos) Plataforma AMD A55 FCH: Porta 8x USB 2.0 (4 nas entradas/saídas traseiras e 4 pelos Dispositivos internos) Slots de expansão Porta 1x PCI Porta 1x PCIe 2.0 x1 Porta 1x PCIe 2.0 x16 Entradas/Saída s no painel traseiro Hi-Fi A85S3: Mouse 1x PS/2 Teclado 1x PS/2 Porta 1x VGA Porta 1x HDMI Porta 1x LAN Porta 2x USB 2.0 Porta 2x USB 3.0 Soquete audio 3x Hi-Fi A75S3: Mouse 1x PS/2 Teclado 1x PS/2 Porta 1x VGA Porta 1x DVI Porta 1x LAN Porta 2x USB 2.0 Porta 2x USB 3.0 Soquete audio 3x Hi-Fi A55S3: Mouse 1x PS/2 Teclado 1x PS/2 Porta 1x VGA Porta 1x DVI Porta 1x LAN Porta 4x USB 2.0 Soquete audio 3x

49 Especificações Conectores na placa Hi-Fi A85S3: Conector 6x SATA 6.0Gb/s Dispositivo 2x USB 2.0 Dispositivo 1x USB 3.0 Conector de 4 pinos x1 Conector de 24 pinos x1 Conector de Ventoinha processador x1 Conector de Ventoinha Sistema x1 Dispositivo Painel Frontal x1 Dispositivo de Audio Frontal x1 Dispositivo CMOS Direct x1 Dispositivo Porta Impressora x1 Dispositivo Porta Série x1 Hi-Fi A75S3: Conector 6x SATA 6.0Gb/s Dispositivo 2x USB 2.0 Dispositivo 1x USB 3.0 Conector de 4 pinos x1 Conector de 24 pinos x1 Conector de Ventoinha processador x1 Conector de Ventoinha Sistema x1 Dispositivo Painel Frontal x1 Dispositivo de Audio Frontal x1 Dispositivo CMOS Direct x1 Dispositivo Porta Impressora x1 Dispositivo Porta Série x1 Hi-Fi A55S3: Conector 6x SATA 3.0Gb/s Dispositivo 2x USB 2.0 Conector de 4 pinos x1 Conector de 24 pinos x1 Conector de Ventoinha processador x1 Conector de Ventoinha Sistema x1 Dispositivo Painel Frontal x1 Dispositivo de Audio Frontal x1 Dispositivo CMOS Direct x1 Dispositivo Porta Impressora x1 Dispositivo Porta Série x1 Fator de Fôrma Fator de Fôrma microATX, 244 mm x 191 mm Suporte OS Windows XP / Vista / 7/ 8 Biostar reserva seu direito de adicionar ou retirar o suporte para qualquer OS com ou sem notificação.

Максимальный термопакет центрального процессора (TDP): 100 ватт * Перечень поддержки центрального процессора смотрите на www.biostar.com.tw. Набор микросхем AMD A85 FCH (Hi-Fi A85S3) AMD A75 FCH (Hi-Fi A75S3) AMD A55 FCH (Hi-Fi A55S3) Память Поддерживает двухканальный DDR3 800/ 1066/ 1333/ 1600/ 1866 2 гнезда платы памяти DDR3 DIMM, максимальная память до 32 Гб Каждый модуль DIMM поддерживает модуль не-ECC 512 Мб/ 1/ 2/ 4/ 8/ 16 Гб DDR3 * Перечень поддержки памяти смотрите на www.biostar.com.tw. Накопитель AMD A85/A75/A55 FCH Поддерживает RAID 0,1,10, 5 & AHCI (A85 FCH) Поддерживает RAID 0,1,10 & AHCI (A75/A55 FCH) Локальная сеть Realtek RTL 8111F Автосогласование 10/ 100/ 1000 Мб/с, работает в полно/полудуплексном режиме Аудиокодек ALC662 Каналы 5.1, высококачественное аудио, Biostar Hi-Fi USB AMD A85/A75 FCH: 6 портов USB 2.0 (2 сзади ввода-вывода и 4 через внутренние контакты) 4 портов USB 3.0 (2 сзади ввода-вывода и 2 через внутренние контакты) AMD A55 FCH: 8 портов USB 2.0 (4 сзади ввода-вывода и 4 через внутренние контакты) Гнезда расшир. 1x гнезда PCI 1x PCIe 2.0 x1 гнездо 1x PCIe 2.0 x16 гнездо Задняя плата ввода-вывода Hi-Fi A85S3: 1 мышь PS/2 1 клавиатура PS/2 1 порт VGA 1 порт HDMI 1 порт локальной сети 2 порта USB 2.0 2 порта USB 3.0 3 гнезд для подключения наушников Hi-Fi A75S3: 1 мышь PS/2 1 клавиатура PS/2 1 порт VGA 1 порт DVI 1 порт локальной сети 2 порта USB 2.0 2 порта USB 3.0 3 гнезд для подключения наушников Hi-Fi A55S3: 1 мышь PS/2 1 клавиатура PS/2 1 порт VGA 1 порт DVI 1 порт локальной сети 4 порта USB 2.0 3 гнезд для подключения наушников

51 Спецификации Внутр. Плата ввода-вывода Hi-Fi A85S3: Соединитель 6x SATA 6 Гб/с 2 контакта USB 2.0 1 контакта USB 3.0 1 4-выводный разъем питания 1 24-выводный разъем питания 1 разъем вентилятора ЦП 1 разъема вентилятора системы 1 контакт передней панели 1 контакт передней аудиопанели 1 контакт микросхемы Clear CMOS 1 контакт порта принтера 1 инфракрасный пользовательский контакт 1 контакт последовательного порта Hi-Fi A75S3: Соединитель 6x SATA 6 Гб/с 2 контакта USB 2.0 1 контакта USB 3.0 1 4-выводный разъем питания 1 24-выводный разъем питания 1 разъем вентилятора ЦП 1 разъема вентилятора системы 1 контакт передней панели 1 контакт передней аудиопанели 1 контакт микросхемы Clear CMOS 1 контакт порта принтера 1 инфракрасный пользовательский контакт 1 контакт последовательного порта Hi-Fi A55S3: Соединитель 6x SATA 3 Гб/с 2 контакта USB 2.0 1 4-выводный разъем питания 1 24-выводный разъем питания 1 разъем вентилятора ЦП 1 разъема вентилятора системы 1 контакт передней панели 1 контакт передней аудиопанели 1 контакт микросхемы Clear CMOS 1 контакт порта принтера 1 инфракрасный пользовательский контакт 1 контакт последовательного порта Конструктив Форм-фактор microATX, 244 мм x 191 мм Поддержка ОС Windows XP / Vista / 7/ 8 Biostar оставляет за собой право добавлять или удалять поддержку любой ОС, с уведомлением или без.

Alimentación de Proyección Térmica (TDP – Thermal Design Power): 100Watt *Por favor consultar con www.biostar.com.tw para la lista de compatibilidad con el procesador. Tipo de Placa AMD A85 FCH (Hi-Fi A85S3) AMD A75 FCH (Hi-Fi A75S3) AMD A55 FCH (Hi-Fi A55S3) Memoria Soporta DDR3 800/ 1066/ 1333/ 1600/ 1866 Doble Canal 2x DDR3 DIMM Ranura de memoria Soporta hasta 32 GB Memoria Cada DIMM soporta un modulo non-ECC 512MB/ 1/ 2/ 4/ 8/ 16 GB DDR3 *Por favor consultar con www.biostar.com.tw para la lista de compatibilidad con el memoria. Almacenamiento de información AMD A85/A75/A55 FCH Soporta RAID 0,1,10, 5 & AHCI (A85 FCH) Soporta RAID 0,1,10 & AHCI (A75/A55 FCH) LAN Realtek RTL 8111F 10/ 100/ 1000 Mb/s auto negociación, capacidad dúplex Mitad/Completo Códec Audio ALC662 Canales Audio de Alta Definición 5.1, Biostar Hi-Fi USB Plataforma AMD A85/A75 FCH: Ranura 6x USB 2.0 (2 en las entradas/salidas posteriores y 4 por los distribuidores internos) Ranura 4x USB 3.0 (2 en las entradas/salidas posteriores y 2 por los distribuidores internos) Plataforma AMD A55 FCH: Ranura 8x USB 2.0 (4 en las entradas/salidas posteriores y 4 por los distribuidores internos) Ranuras de Extinción Ranura 1x PCI Ranura 1x PCIe 2.0 x1 Ranura 1x PCIe 2.0 x16 Panel trasero de E/S Hi-Fi A85S3: Ratón 1x PS/2 Teclado 1x PS/2 Ranura 1x VGA Ranura 1x HDMI Ranura 1x LAN Ranura 2x USB 2.0 Ranura 2x USB 3.0 Socket audio 3x Hi-Fi A75S3: Ratón 1x PS/2 Teclado 1x PS/2 Ranura 1x VGA Ranura 1x DVI Ranura 1x LAN Ranura 2x USB 2.0 Ranura 2x USB 3.0 Socket audio 3x Hi-Fi A55S3: Ratón 1x PS/2 Teclado 1x PS/2 Ranura 1x VGA Ranura 1x DVI Ranura 1x LAN Ranura 4x USB 2.0 Socket audio 3x

53 Especificaciones Conectores en placa Hi-Fi A85S3: Conector 6x SATA 6Gb’s Distribuidor 2x USB 2.0 Distribuidor 1x USB 3.0 Conector con 4 patillas x1 Conector con 24 patillas x1 Conector Ventilador procesador x1 Conector Ventilador Sistema x2 Distribuidor Panel Frontal x1 Distribuidor Audio Frontal x1 Distribuidor CMOS Directo x1 Distribuidor Ranura Impresora x1 Distribuidor Ranura Serie x1 Hi-Fi A75S3: Conector 6x SATA 6Gb’s Distribuidor 2x USB 2.0 Distribuidor 1x USB 3.0 Conector con 4 patillas x1 Conector con 24 patillas x1 Conector Ventilador procesador x1 Conector Ventilador Sistema x2 Distribuidor Panel Frontal x1 Distribuidor Audio Frontal x1 Distribuidor CMOS Directo x1 Distribuidor Ranura Impresora x1 Distribuidor Ranura Serie x1 Hi-Fi A55S3: Conector 6x SATA 3Gb’s Distribuidor 2x USB 2.0 Conector con 4 patillas x1 Conector con 24 patillas x1 Conector Ventilador procesador x1 Conector Ventilador Sistema x2 Distribuidor Panel Frontal x1 Distribuidor Audio Frontal x1 Distribuidor CMOS Directo x1 Distribuidor Ranura Impresora x1 Distribuidor Ranura Serie x1 Factor de Forma Factor de Forma microATX, 244 mm x 191 mm Soporte OS Windows XP / Vista / 7/ 8 Biostar reserva su derecho de añadir o retirar el soporte para cada OS con o sin notificación. 2012/12/12