Acard ARS-2160 Quick Installation Manual
Text of Acard ARS-2160 Quick Installation Manual
Quick Installation Guide of ARS-2160/ARS-2320 v1.3
Section 1 Introduction
1.1 Overview
ARS-2160/ARS-2320 is a SCSI-to-SATA II bridge. Through its connection to a SCSI host 68-pin
connector the bridge can turn a 2.5'' hard drive into one with LVD SCSI efficiency. Thus, you can
enjoy the high performance of SCSI.
1.2 Specification
Temperature:
Operation:
Humidity: 15% to 90%
Size: 14.6 cm(L) x 10.1 cm (W) x 2.5cm (H)
1.3 Conn
Section 3 Installation
Here we simply take ARS-2160 to demonstrate.
1. Remove the 6 screws of ARS-2160 and open the upper case.
2. Slide the 2.5'' SATA hard drive along the sides of ARS-2160 till it connects CN16.
3. Fix the SATA hard drive to the two sides of ARS-2160 with the enclosed 4 screws.
5. Set the jumper, and connect ARS-2160 to SCSI host controller via a SCSI cable. Then provide
power to ARS-2160 with a 4-pin power core.
4. Return the upper