Mitsubishi QCPU Programming Manual

• SAFETY PRECAUTIONS • (You must read these cautions before using the product) As for the use of the product, please carefully read this manual and the related manuals introduced later. Also, please pay attention to safety adequately and manage the product correctly. The safety cautions shown in this manual apply to the product only. In this manual ...

[Design Precautions] ! DANGER • When connecting a peripheral device to the CPU module or connecting a personal computer or others to an intelligent function module, always configure an interlock circuit in the sequence program to ensure that the whole system always operate safely. Also, make sure to read this manual carefully and check all operatio ...

REVISIONS * The manual number is given on the bottom left of the back cover. Print Date * Manual Number Revision Dec., 1999 SH (NA) 080040-A First edition Jun., 2001 SH (NA) 080040-B Partial addition About Manuals, Chapter 1, Chapter 2, Section 2.1, 3.1, 3.2, 3.3, 3.3.1, 4.2.3, 4.3.2, 4.3.5, Chapter 5, Section 5.1, 5.2, Chapter 6, Chapter 7, Section 8. ...

* The manual number is given on the bottom left of the back cover. Print Date * Manual Number Revision May,2008 SH (NA) 080040-K Revision due to the addition of Process CPU and Universal model QCPU Addition module Q03UDECPU, Q04UDEHCPU, Q06UDEHCPU, Q13UDEHCPU, Q26UDEHCPU Q02PHCPU, Q06PHCPU Partial correction GENERIC TERMS AND ABBREVIATIONS USED IN THIS ...

INTRODUCTION Thank you for choosing the Mitsubishi MELSEC-Q/QnA Series of Programmable Logic Controllers. Please read this manual carefully so that the equipment is used to its optimum. A copy of this manual should be forwarded to the end User. CONTENTS SAFETY CAUTIONS .................................................................................... ...

5. PID CONTROL PROCEDURE 5 - 1 to 5 - 24 5.1 PID Control Data......................................................................................................................................5 - 4 5.1.1 Number of loops to be used and the number of loops to be executed in a single scan...............5 - 15 5.1.2 Sampling cycle ...................... ...

APPENDIX APP - 1 to APP - 3 Appendix 1 Processing Time List .............................................................................................................APP - 1 Appendix 2 Anti-Reset Windup Measure .................................................................................................APP - 3 ...

About Manuals The following manuals are also related to this product. In necessary, order them by quoting the details in the tables below. Related Manuals Manual Name Manual Number (Model Code) QCPU User's Manual (Function Explanation, Program Fundamentals) Describes the functions, programming procedures, devices, etc. necessary to create programs. (So ...