Chiayo DH2400 Manual
Text of the manual
Digital Handheld Microphone
Parts and functions
3-STEP power switch
To prevent other user from turning off the power, you may slide this switch
to the right to lock the microphone on stand-by or mute status. Slide to the
left to unlock.
Power status
ON
ON
MUTE
MUTE
OFF
Lock status
unlocked
locked
unlocked
locked
can’t be
locked
Cartridge
Battery power LED
Power switch
LCD
Setting button
Menu button
Channel synchronizing button
Battery compartment
Color cap
Charging port
Battery installation & indicator
When the transmitter is switched
ON, a blue LED will blink once to
denote the batteries installed are
in good condition.
If the LED remains illuminated, it
means the batteries are weak and
require replacement.
This transmitter requires 2 x AA
batteries to operate.
To install, remove the battery cover
and slide the batteries into the
battery compartment & replace the
battery cover.
Note: Batteries contain a corrosive acid that may leak and damage the
transmitter when stored for a long period. Batteries should be removed
from the transmitter before storing without use for more than 4 weeks.
Changing CHANNEL / FREQUENCY
1 Press-release MENU button until the CHANNEL-FREQUENCY
page appears.
2 Press and hold SET button until the channel number flashes to
denote readiness for setting.
3 Press-release SET (UP) or MENU (DOWN) button to select a
new channel.
4 After a channel is chosen, wait about 3 seconds to store the
setting.
MHz
CH:079
2480
MHz
CH:079
2480
MHz
CH:076
2477
Channel synchronizing of the receiver and transmitter
1 Unscrew the microphone’s lower housing and then press and
hold the synchronizing button until LINK flashes on the LCD.
2 Press and press and hold the receiver’s SYNC button until the
frequency icon
appears. After successful channel
synchronizing, this icon will disappear automatically.
CH:000
LINK
FREQ
SYNC
CH
FREQ
CH.
RF
AF
MHz
0792480
