ESP CanCam Quick Manual Setup

Insert batteries • Unscrew the top lid of the CanCam to access the battery compartment 1 • Install 4 “C” cell batteries with the correct polarity (+/-) as indicated in the battery compartment • Screw the lid back on using the guidance notch on the lid to secure correctly Load SD Card • Unscrew the bottom of the Can ...

4 • Turn the switch on the base of the CanCam to CAM • Press the [M] button within 30 seconds to enter the menu • Use the [Up] and [DOWN] button until PIR is flashing on the LCD screen and Press [OK] • The next screen will display the camera’s capture type. Still ...

Unit 7, Target Park, Shawbank Rd Lakeside, Redditch B98 8YN www.espuk.com Telephone: 01527 515150 email: [email protected] 1. Mark out fixing centres (use a spirit level). Use the appropriate method of fixing for theparticular mounting surface of your installation. 3. Insert the Camera so the lens and sensors line up with the relevant sl ...