DAQ system NET-AIO11 Operation & User’s Manual

-1- http://www.daqsystem.com NET-AIO11 User’s Manual Windows, Windows2000, Windows NT, Windows XP, Windows 7 and Windows CE are trademarks of Microsoft. We acknowledge that the trademarks or service names of all other organizations mentioned in this document as t ...

-2- http://www.daqsystem.com Contents 1. Introduction 2. Product Features 3. Hardware Device 4. Software References (Caution) ★ The board and external input/output signals of the device have to connect the common ground(Frame) to protect the board and peripheral ...

-3- http://www.daqsystem.com 1. Introduction NET-AIO11 is the High function Signal Processing board to support Analog Input and Digital Output. The 8-channel A / D converted data by applying TI TMS320C55xx DSP chip analog signal can be obtained the high speed data ...

-4- http://www.daqsystem.com 2. Product Features [Table 1. NET-AIO11 Specification] List Specification Interface USB B-type Connector RJ-45 Ethernet Connector Header Pin Connector for Analog Input Header Pin Connector for Digital Input/Output 5VDC Power Connector A ...

-5- http://www.daqsystem.com 3. Hardware Device In this chapter, board jumper set and connector for interfaced the PC or other operation equipment is described. USB-B Connector LED (PWR,RUN) POWER Connector Ethernet Connector AIN Connector DSP Mode Setup Jumper Res ...

-6- http://www.daqsystem.com 3.4 AIN(Analog Signal Input) Connector (J7) Analog input signals are received an input the range of ± 10V differential (Differential) signal and a single (Single-ended) signals. In a single signal, an AINxN pin connects to the Ground ...

-7- http://www.daqsystem.com 3.5 Ethernet Connector (J11) It connects to the Ethernet Hub or Ethernet Adapter. It automatically is detected Cross/Direct cable. 3.6 POWER Connector (J6) It is a power of the board, input over +5VDC, 1A. J6 DC-JACK, 2mm 1 2 PCB [Tab ...

-8- http://www.daqsystem.com 3 8 7 6 2 5 4 1 9 14 13 12 11 10 15 20 19 18 17 16 J13 BOX HEADER RA 2x10, 2.54mm [Table4. Digital Signal Output Connector Description] Pin No. Pin Name Description Remark 1 DIN_COM Digital Input Common Terminal, 2 DOUT_COM Digital Outp ...

-9- http://www.daqsystem.com 4. Software NET-AIO11 board can easily access many of the features of the library (API) to implement, and the sample program is provided to the user. 4.1 Sample Program The library is used to implement the sample program, it is organiz ...

-10- http://www.daqsystem.com Read from Lib board. It displays that the number of data bytes of read from the library buffer in application. 10 Buffering WR Pointer Buffering RD Pointer It displays a saving pointer of library buffer. It displays a reading pointer o ...