Carel supernode Technical Leaflet

Text of Carel supernode Technical Leaflet

I n t e g r a t e d C o n t r o l S o l u t i o n s & E n e r g y S a v i n g s

Technical leafl et Foglio istruzioni supernode controllo elettronico per umidifi cazione electronic controller for humidifi cation

Attenzione: il simbolo nel coperchio plastico del controllo indica di riferirsi al presente foglio

istruzione durante l’installazione elettrica. Symbol: Warning: the symbol in the plastic cover of the control, means to refertto this techinical leafl et, during the electrical installation.

+050003325 Supernode for humidifi cation - 1.0 - 20.06.2014

1. INTRODUCTION The gateway can connect up to a maximum of 20 devices (humiSteam Y-X-W, heaterSteam, gaSteam), allowing up to 150 variables (50 analogue, 50 integer, 50 digital) for each connected device to be managed by the external supervisor. Seven pre-set templates allow the variables ex

+050003325 Supernode for humidifi cation - 1.0 - 20.06.2014

2. INSTALLATION Below is a description of the connectors used for connection and installation of Supernode: 2.1 Connectors 1 5 2 3 4 J7 J10 J9 J8 J5 J1 G G0 +5Vref +VDC ID1 GND J3 C1 NC1 NO1 J2 SYNC B1 B2 B3 B4 B5 B6 GND serial card 2 serial card 1 J4 J6 TLAN GND C2 NO2 GND Y2 Y1 C622P028/R2

+050003325 Supernode for humidifi cation - 1.0 - 20.06.2014

2.2 Connection diagram serial card 1 serial card 2 status RS485 GNX RS485 + – P1 P2 P3 BACnet™ MS/TP G0 G RS485 CAREL master GND RS485 CAREL slave PCOS004850: RS485 serial card PCO100MDM0: modem card PCO1000BA0: BACnet™ MSTP RS485 interface PCO1000WB0: pCO Web - Ethernet™/BACnet�

+050003325 Supernode for humidifi cation - 1.0 - 20.06.2014

3. PROGRAMMING THE DEVICE 1. Set the number of devices connected to the gateway: values available: from 1 to 20 devices. Menu path: Service  Service Settings  Device settings 2. Set the address and type of device : Models available: heaterSteam, humiSteam X-plus, humiSteam basic, gaSte

Carel Controller Owners Instructions: