Beckhoff CX5120 Manual 

CX51x0 3 Version: 1.9 Table of contents 1 Notes on the documentation.................................................................................................................... 5 1.1 Explanation of symbols...................................................................................................................  6 1.2 Rela ...

CX51x0 4 Version: 1.9 7.3 Windows 10 IoT Enterprise LTSB.................................................................................................  46 7.3.1 Identification of the Ethernet interfaces (X000, X001) ..................................................... 46 7.3.2 Enabling jumbo frames .................................... ...

CX51x0 5 Version: 1.9 1 Notes on the documentation This description is only intended for the use of trained specialists in control and automation engineering who are familiar with the applicable national standards. It is essential that the documentation and the following notes and explanations are followed when installing and commi ...

CX51x0 6 Version: 1.9 1.1 Explanation of symbols The following symbols with corresponding warnings or explanatory text are used in the documentation. Read and follow the warnings. Symbols that warn of personal injury: DANGER Serious risk of injury Note this warning. Hazard with high risk of death or serious injury. WARNING Risk of ...

CX51x0 7 Version: 1.9 1.2 Related documents Information on operation in potentially explosive atmospheres Please refer to the corresponding documentation for important information and notes regarding operation of the CX51x0 Embedded PCs in potentially explosive atmospheres. In particular, read and follow the sections on safety cont ...

CX51x0 8 Version: 1.9 2 For your safety Read the chapter on safety and follow the instructions in order to protect from personal injury and damage to equipment. Limitation of liability All the components are supplied in particular hardware and software configurations appropriate for the application. Unauthorized modifications and changes to t ...

CX51x0 9 Version: 1.9 2.2 Staff qualification All operations involving Beckhoff software and hardware may only be carried out by qualified personnel with knowledge of control and automation engineering. The qualified personnel must have knowledge of the administration of the Embedded PC and the associated network. All interventions must be ca ...

CX51x0 10 Version: 1.9 • Ensure standard-compliant connection and avoid risks to personnel. Ensure that data and supply cables are laid in a standard-compliant manner and ensure correct pin assignment. • Observe the relevant EMC guidelines for your application. • Avoid polarity reversal of the data and supply cables, as this may cause d ...