BEA IXIO-DT1 Manual 

Text of the manual

Page 1 of 9

75.5751.11 IXIO-DT1 UL 20180305 2 1 5 6 7 8 4 9 3 IXIO-DT1 1. LCD 2. radar antenna (narrow field) 3. radar antenna (wide field) 4. AIR-curtain width adjustment 5. AIR-lenses 6. cover 7. main connector 8. main adjustment knob 9. AIR-curtain angle adjustment knob Activation & safety sensor for automatic sliding doors 10IMB: Bracket accessory 10ICA:

Page 2 of 9

75.5751.11 IXIO-DT1 UL 20180305 x LED-SIGNAL (green) Motion detection (red) Presence detection LED flashes LED flashes quickly LED is off LED flashes x times LED flashes red-green INSTALLATION The sensor should be mounted securely to avoid extreme vibrations. Avoid highly reflective objects in the infrared field. Avoid moving objects and light so

Page 3 of 9

75.5751.11 IXIO-DT1 UL 20180305 HOW TO USE THE LCD To adjust contrast, push and turn the grey button simultaneously. During normal function only. Push to select parameter Scroll menu up/down Negative display = active output CHANGING A VALUE Scroll values up/down Push to save new value VALUE CHECK WITH REMOTE CONTROL DISPLAY DURING NORMAL FUNCTION

Page 4 of 9

75.5751.11 IXIO-DT1 UL 20180305 2 1 7.2 ft 7.2 ft RADAR OPENING IMPULSE FIELD ANGLE field size: 9 immunity: 2 field size: 9 immunity: 2 The size of the detection field varies according to the mounting height of the sensor. The following graphics are representations - not default settings. from 15° to 45°, default 30 ° from -15° to 15°, defau

Page 5 of 9

75.5751.11 IXIO-DT1 UL 20180305 3 4 + + + 2 s 4 s OR WIDTH Part of the detection field can be masked to reduce its width. The arrow position determines the width of the detection field. INFRARED SAFETY FIELD CLOSER AWAY If necessary, adjust the AIR-curtain angle (from -7° to 4°, default 0°). Activate the visible* spots to verify the position o

Page 6 of 9

75.5751.11 IXIO-DT1 UL 20180305 + + DeEner/NO Energ/NC Energ/NC Energ/NC Energ/NC DeEner/NO DeEner/NO DeEner/NO DeEner/NO Energ/NC DeEner/NO Energ/NC Energ/NC Energ/NC Energ/NC Energ/NC Energ/NC DeEner/NO Energ/NC DeEner/NO DeEner/NO DeEner/NO DeEner/NO DeEner/NO Back More RAD: FIELDSIZE RAD: IMMUNITY RAD: DIRECTION RAD: HOLDTIME RAD: REENTRY RAD

Page 7 of 9

75.5751.11 IXIO-DT1 UL 20180305 TROUBLESHOOTING ORANGE LED flashes 1x. The sensor signals an internal fault. Replace sensor. ORANGE LED flashes 2x. The power supply voltage is too low/high. Check power supply voltage in diagnotistics menu (menu 3) of the LCD. Check wiring. ORANGE LED flashes 4x. The sensor does not receive enough AIR-energy. Decr

Page 8 of 9

75.5751.11 IXIO-DT1 UL 20180305 TROUBLESHOOTING (cont.) The LED and the LCD displays are off. No power to sensor. Check wiring. Check for correct power supply. The reaction of the door does not correspond with the LED signal. Incorrect output configuration / wiring. Check output configuration setting. Check wiring. The LCD or remote control does

Page 9 of 9

75.5751.11 IXIO-DT1 UL 20180305 Tech Support: 1-800-407-4545 | Customer Service: 1-800-523-2462 General Tech Questions: [email protected] | Tech Docs: www.BEAinc.com 75.5751.11 IXIO-DT1 UL 20180305 ©BEA | Original instructions BEA hereby declares that the IXIO-DT1 is in conformity with the basic requirements and the other relevant provis

Page 1 of 8

75.5785.10 IXIO-ST UL INDUSTRIAL 20180305 IXIO-ST INDUSTRIAL 1 3 4 5 6 2 7 Détecteur d’ouverture et de sécurisation pour portes coulissantes automatiques Téléchargez l’appli BEA DECODER pour un bref aperçu des réglages FRANÇAIS DESCRIPTION 1. écran ACL 2. réglage de la largeur du rideau IRA 3. lentilles IRA 4. capot 5. connecteur pri

Other Kitchen Appliances Manuals