Aria 31031 Operation & User’s Manual
Text of the manual
Aria 2.1-Channel In-Ceiling Speaker System
with 8" Dual Coil Subwoofer and 3" Satellites
31031 2.1 In-Ceiling Speaker System
31032 8" Dual Coil Subwoofer
31033 3" Satellite Speakers (pair)
User's Manual
SAFETY WARNINGS AND GUIDELINES
These speakers are intended for indoor use only.
Do not expose these speakers to water or moisture of any kind.
If operating these speakers in a humid environment, ensure that no condensation
occurs. Condensation could cause damage to the speaker cones and voice coils.
Power off and unplug all Audio/Video comp
Get ready to enhance your living space with the Aria 2.1-Channel In-Ceiling Speaker
System. Our in-ceiling subwoofer brings robust sound to any room with its 360-watt peak
power capacity and its dual voice coils in a left/right configuration. The balanced two-way
crossover in the sub splits the audio spectrum so the sub only reproduces the bas
Please take an inventory of the package contents to ensure you have all the items listed
below. If anything is missing or damaged, please contact Monoprice Customer Service for a
replacement.
1x 31033 8" subwoofer
2x 31032 3" satellite speakers
1x Installation template/paint mask
1x User's manual
PLANNING
The Aria ceiling speakers and subw
Amplifier and Wiring Plan
Ideally, all the speakers and subwoofer will be connected to two parallel wire runs, and
these wires will be hidden in the wall. The Aria™ system is designed for the speakers to be
evenly divided around the sub. Use Origin Access CL2 Rated Series Speaker cable.
Use two 2-conductor cables or one 4-conductor cable like our 250' ca
In the same way that a new car requires a break-in period before it can be safely operated
at high engine RPMs, speakers require a break-in period before they can be safely operated
at maximum volume levels. Proper break-in ensures that the moving parts of the speaker
(the cone and cone suspension) are allowed to flex and soften, losing th
stray wire strands shorting the connections, allow for use of heavier gauge speaker wire in
most cases, and it is much easier to identify the polarity from a color coded ring on a plug
then from a subtle marking along the length of a wire.
Because the speaker wires will necessarily be run through your walls, you must use in-wall
rated wire. This is require
When you are ready to prepare your speaker wires, first separate about 4" of wire, then
strip about 1/4" (6mm) insulation from the end and twist it to prevent stray strands. If you
plan to use banana or pin plugs (highly recommended), install the plugs on the wire.
PAINTING
The grille and frame can be painted to match your ceiling, making the speaker even
Perform the following steps to install the speakers into a ceiling composed of drywall. The
speaker can be mounted to a surface that is between 3/8" and 1-1/4" thick, with at least 4"
internal clearance.
1. Determine where you will be installing the speaker. Use a stud finder to ensure that
there is sufficient space between the desired locati