Argos Malibu Assembly Instructions Manual

Text of Argos Malibu Assembly Instructions Manual

Width - 120cm

Depth - 49cm Height - 72cm Malibu - Desk Assembly Instructions - Please keep for future reference If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800 Issue 12 - 22/07/14 Important - Please read these instructions fully before starting assembly 275/6297 278/6009 274/6616 278/5220 247/3848 278/6652 268/6965 238/3615 275/3922 246/4950 246/5818 280/0332 247/7167

Safety and Care Advice

Important - Please read these instructions fully before starting assembly • Warning: This unit weighs approximately 24kgs. Please lift with care. • Check you have all the components and tools listed on pages 2 and 3. • Remove all fittings from the plastic bags and separate them into their groups. • Keep children and animals away from the work area, small parts could choke if swallowed. • Make sure you have enough space to l

Components - Panels

Please check you have all the panels listed below 2 1 4 If you have damaged or missing components, call the Customer Helpline: 08456 400800 quoting the reference numbers below 2 3 5 8 13 7 6 Drawer Back (W317-124) (317 x 124mm) x 3 Drawer Base (T328-317) (328 x 317mm) x 3 Back (X646-375) (646 x 375mm) Left Side (D2785A) (706 x 353mm) Right Side (D2786A) (706 x 353mm) Bookcase End (D2787A) (706 x 186mm) x 2 Shelf (D2788A) (394 x 182mm) x

Please check you have all the fittings listed below

Tools required 3 Components - Fittings If you have damaged or missing components, call the Customer Helpline: 08456 400800 quoting the reference numbers below Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required. A Wooden dowel (F22) x 8 B Metal dowel (F901) x 14 C D Large locking nut (F900) x 8 E Small locking nut (F3)

If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference numbers below Step 1 8 x 3 x 3 x 3 x 3 B BB F F Note: Due to the manufacturing process, the holes for the locking nut can be on either surface of the drawer sides. Note: The locking nuts can be on either surface of the drawer sides. Make sure that the small groove is on the inside, as shown. F F 9 10 Step 2 Prepare the 3 drawe

Fit the drawer base

Slide the drawer base down the grooves in the drawer sides and and down into the groove in the drawer front . Step 5 Fit the drawer back Fit the drawer back between the drawer sides and . Make sure that the drawer base fits into the groove in the drawer back . Hold the drawer back in position and tap the knock-in pegs through the holes in the drawer sides and

Argos Indoor Furnishing Owners Instructions: