Amerihome ATABLE Assembly Manual
Text of Amerihome ATABLE Assembly Manual
ATABLE Bar Table Assembly Instructions
Max Weight Capacity 200 Lb
READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.
This manual provides important information on proper operation & maintenance. Every effort has been
made to ensure the accuracy of this manual. These instructions are not meant to cover every possible
condition and situation that may occur. We reserve the right to change this product at any time without
prior notice.
IF THERE IS
1. Remove Black Cap and discard before assembly.
2. Use a Hex Wrench (G)
to attach the Table Plate
and Leg (E) to the
underside of the Tabletop
(D) with the provided Hex
Bolts (F).
Insert the Support Cylinder (A) into the center of the tabletop.
3 Set the foot cap over the hole in the Base. (C)
Insert the thicker end of the Support Cylinder into the
center hole of the Base, and press down FIRMLY.
4. Guide the open end of the Tabletop