Queclink GL300 Manual 

Text of Queclink GL300 Manual 

GSM/GPRS/GPS Tracker GL300

@Track Air Interface Protocol Application Notes: TRACGL300AN001 Revision: 1.02 [email protected]

Queclink GL300 GL300 @Tracker Air Interface Protocol

Document Title GL300 @Tracker Air Interface Protocol Version 1.02 Date 2013-11-26 Status Release Document Control ID TRACGL300AN001 General Notes Queclink offers this information as a service to its customers, to support application and engineering efforts that use the products designed by Queclink. The information provided is based upon requirements specifically provided to Queclink by the customers. Queclink has not
GL300 @Tracker Air Interface Protocol Contents Contents ............................................................................................................................................2 Table Index........................................................................................................................................4 Figure Index.....................................................................................................
GL300 @Tracker Air Interface Protocol TRACGL300AN001 - 3 - 3.3.6. Report Google Maps hyperlink............................................................................84 3.4. Heartbeat ...........................................................................................................................85 3.5. Sever Acknowledgement...................................................................................................85 Appendix: Message
GL300 @Tracker Air Interface Protocol Table Index TABLE 1: TERMS AND ABBREVIATIONS .........................................................................................8 TRACGL300AN001 - 4 - Queclink Confidential
GL300 @Tracker Air Interface Protocol Figure Index FIGURE 1: SYSTEM ARCHITECTURE................................................................................................9 FIGURE 2: @TRACKER PROTOCOL MESSAGES FLOW...............................................................10 TRACGL300AN001 - 5 - Queclink Confidential
GL300 @Tracker Air Interface Protocol 0. Revision history Revision Date Author Description of change 0.02 2012-10-12 Evan.tu Initial 1.00 2012-10-26 2012-11-12 2012-11-14 2012-11-16 2012-11-19 2012-11-20 2012-11-26 2012-11-28 2012-11-29 2012-12-04 2012-12-15 2013-1-5 2013-1-9 2013-1-15 Evan.Tu Evan.Tu Evan.Tu Evan.Tu Evan.Tu Evan.Tu Evan.Tu Evan.Tu Evan.Tu Evan.Tu Evan.Tu Evan.Tu Evan.Tu Evan.Tu Evan.Tu Evan.Tu 1. Add a new parameter to control whether to
GL300 @Tracker Air Interface Protocol TRACGL300AN001 - 7 - 2.Add the mode 6 in the command AT+GTFRI 2013-11-14 Evan.Tu 1.Add a new protocol command AT+GTJDC Queclink Confidential
GL300 @Tracker Air Interface Protocol 1. Overview 1.1. Scope The @Track Air Interface Protocol is a digital communication interface based on printable ASCII characters over SMS or GPRS which is used for all communication between the backend server and the terminal. The backend server sends a command to the terminal and then the terminal confirms with an acknowledgement message. If necessary, the terminal also sends report messages to the backend server. Th
GL300 @Tracker Air Interface Protocol 2. System Architecture Figure 1: System architecture The backend server can be accessed by many terminals and should have the following abilities:  The backend server should be able to access the internet and listen to the connection originating from the terminal.  The backend server should be able to support a TCP or UDP connection with the terminal. It should be able to receive data from the terminal and send d
GL300 @Tracker Air Interface Protocol 3. Message Description 3.1. Message Format All of the @Track Air Interface Protocol messages are composed of printable ASCII characters. Each message has the following format: Message format Message type AT+GTXXX=,,…$ Command +ACK:GTXXX,,,…$ Acknowledgement +RESP:GTXXX,,,…$ Report The entire message string ends with character ‘$’. The cha
GL300 @Tracker Air Interface Protocol When the device receives commands over the air, it supports several commands in one SMS or GPRS packet without separate symbol between two close commands. But it is necessary to make sure the total size of the several commands is not longer than 160 if the commands are sent via SMS. Here is an example to send three commands in one SMS. AT+GTFRI=gl300,1,1,,,0000,2359,60,60,,,1F,0,,,,,,,,0007$AT+GTGEO=gl300,0,3,101.41224
GL300 @Tracker Air Interface Protocol 3.2. Command and Acknowledgement 3.2.1. Quick Start Setting The command AT+GTQSS is used to set the GPRS parameter and backend server information in one command if all these settings are within 160 bytes, otherwise use AT+GTBSI and AT+GTSRI in two steps.  AT+GTQSS= Example: AT+GTQSS=gl300,cmnet,,,4,,,116.226.44.17,9001,116.226.44.16,9002,+8613812341234,0,1, ,,0001$ Parameter Length (byte) Range/Format Default Passwo
GL300 @Tracker Air Interface Protocol terminal connects to the backend server every time it needs to send data and will shut down the connection when the terminal finishes sending data. And if it is failed to establish a TCP connection with the backend server (including Main Server and Backup Server), it will try to send data via SMS.  2: TCP short-connect forced mode. The connection is based on TCP protocol. The terminal connects to the backend server
GL300 @Tracker Air Interface Protocol the device.  1: the backend server should reply SACK message after receiving a message from the device.  : the serial number for the command. It will be invoked in the ACK message of the command.  : a character to indicate the end of the command. And it should be “$”. Note: If is set as 4 (UDP mode), it is strongly recommended to enable SACK or heart beat mechan
GL300 @Tracker Air Interface Protocol 3.2.2. Bearer Setting Information The command AT+GTBSI is used to set the GPRS parameter.  AT+GTBSI= Example: AT+GTBSI=gl300,cmnet,,,,,,,0002$ Parameter Length (byte) Range/Format Default Password 4 – 6 ‘0’ – ‘9’, ‘a’ – ‘z’, ‘A’ – ‘Z’ gl300 APN <=40 APN user name <=30 APN password <=30 Reserved 0 Reserved 0 Reserved 0 Reserved 0 Serial number 4 0000 – FFFF Tail character 1 $ $ The a
GL300 @Tracker Air Interface Protocol 3.2.3. Backend Server Register Information The command AT+GTSRI is used to configure the backend server information that the terminal reports to and the report mode that defines the communication method between the backend server and the terminal.  AT+GTSRI= Example: AT+GTSRI=gl300,4,,,116.226.44.17,9001,116.226.44.16,9002,+8613812341234,0,1,,,,,0003$ Parameter Length (byte) Range/Format Default Password 4 – 6 ‘
GL300 @Tracker Air Interface Protocol Example: +ACK:GTSRI,1A0102,135790246811220,,0003,20100310172830,11F0$ Parameter Length (byte) Range/Format Default Protocol version 6 XX0000 – XXFFFF, X∈{'A'-'Z','0'-'9'} Unique ID 15 IMEI Device name 20 Serial number 4 0000 – FFFF Send time 14 YYYYMMDDHHMMSS Count number 4 0000 – FFFF Tail character 1 $ $ TRACGL300AN001 - 17 - Queclink Confidential

Queclink GPS Owners Instructions: