MOGlabs ARF021 Manual 

MOG Laboratories Pty Ltd (MOGLabs) does not assume any liabil- ity arising out of the use of the information contained within this manual. This document may contain or reference information and products protected by copyrights or patents and does not convey any license under the patent rights of MOGLabs, nor the rights of others. MOGL ...

based experiments. They are used for frequency shifting, amplitude modulation, and laser frequency stabilisation. Many experiments re- quire very simple control of the RF frequency and power, but others require sophisticated sequences. The MOGLabs ARF/XRF agile RF synthesizer provide ...

the following safety information before attempting to operate. Also please note several specific and unusual cautionary notes before using the MOGLabs ARF/XRF, in addition to the safety precautions that are standard for any electronic equipment. CAUTION To ensure corre ...

and your device. Open/short circuit Each RF output should be connected to a 50 Ω load. The AR- F/XRF will disable each high-power RF output if not connected or if a short-circuit is detected. Reflected power The RF reflected power and VSWR (voltage standing wave ratio) a ...

2 1.2 RF on/off control . . . . . . . . . . . . . . . . . . . . . 4 2 Connections and controls 5 2.1 Front panel controls . . . . . . . . . . . . . . . . . . . 5 2.2 Front panel display/monitor . . . . . . . . . . . ...

29 5.4 Examples . . . . . . . . . . . . . . . . . . . . . . . . . . 30 6 PID stabilisation 35 6.1 Signal conditioning . . . . . . . . . . . . . . . . . . . . 35 6.2 PID control loop . . . . . . . . . . . . . . . . . . . . . 36 6.3 Dual modulation with PID . . . . . . . . . . . . . . . 37 6. ...

84 A Specifications 89 B Firmware upgrades 91 B.1 Firmware components . . . . . . . . . . . . . . . . . . 91 B.2 Factory reset . . . . . . . . . . . . . . . . . . . . . . . 92 B.3 Upgrade via mogrffw . . . . . . . . . . . . . . . . . . 92 B.4 Upgrade via web interface . . . . . . . . ...