General ASH13PSCCW Operating Manual

CE-KONFORMITÄTSERKLÄRUNG DECLARATION DE CONFORMITE-CE CE DECLARACIÓN DE CONFORMIDAD DICHIARAZIONE DI CONFORMITÀ CE ∆ΗΛΩΣΗ ΕΓΚΡΙΣΗΣ ΚΑΤΑΛΛΗΛ�ΤΗΤΑΣ CE VERKLARING VAN OVEREENSTEMMING EG-FÖRSÄKRAN OM ÖVERENSSTÄMMELSE DECLARAÇÃO DE CONFORMIDADE DA COMUNIDADE EUROPEIA (CE) FUJITSU GENERAL (EURO) ...

Fig. 4 Fig. 1 Fig. 2 Fig. 3 ] ^ a b c d e f g QUIET U X T [ Y S R Q V Z W O P OPEN TEST RUN \ Fig. 7 CONTENTS SAFETY PRECAUTIONS..................................... En-1 FEATURES AND FUNCTIONS ........................... En-2 NAME OF PARTS . ........................ ...

INVERTER At the start of operation, a large power is used to bring the room quickly to the desired temperature. Afterwards, the unit automatically switches to a low power setting for eco- nomic and comfortable operation. PLASMA AIR CLEANING FILTER Electrical power is used to charge the filter to remove con- taminants from the air ...

1 Intake Grille 2 Open Panel 3 Air Flow Direction Louver 4 Right-Left Louvers (behind Air Flow Direction Louver) 5 Indicator (Fig. 2) 6 Indoor Temperature Monitor Indicator 7 OPERATION Indicator Lamp 8 TIMER Indicator Lamp G If the TIMER Indicator Lamp flashes when the timer is operating, it indicates that a fault has occurred with th ...

tally swallowing batteries. G When not using the remote control unit for an extended period, remove the bat- teries to avoid possible leakage and dam- age to the unit. G If leaking battery fluid comes in contact with your skin, eyes, or mouth, immedi- ately wash with copious amounts of w ...

Example: When set to 26 °C. To Select Mode Operation 1 Press the START/STOP button (Fig. 5 U). The Indoor Unit’s OPERATION Indicator Lamp (red) (Fig. 2 7) will light. The air conditioner will start operation. 2 Press the MASTER CONTROL button (Fig. 5 P) to se- lect the desired mode. Each time the button ...

Press the START/STOP button. The OPERATION indicator lamp (red) (Fig. 2 7) will go out. About AUTO CHANGEOVER Operation AUTO: G When AUTO CHANGEOVER operation first selected, the fan will oper- ate at very low speed for about one minute, during which time the unit detects the room conditions and selects the proper operating mode. If th ...

Example: When set to AUTO. G Use this function to remove airborne impurities such as dust, tobacco smoke and pollen and clean the air of the room. G The air cleaning operation can be used alone or combined with cooling, heating and dry (dehumidifying) operations. Starting air cleaning operation 1 Start the operation in any one of ...

Note that the hi-power operation will be automatically cancelled under the following conditions. G During heating operations: When the room temperature exceeds the temperature setting by 2 °C. G During cooling and dry operations: When the room temperature is 1 °C lower than the temperature setting or when ...

Use the TIMER button to select “TIMER RESET.” The air conditioner will return to normal operation. To Change the Timer Setting 1. Follow the instructions given in the section “To Use the ON Timer or OFF Timer” to se- lect the timer setting you wish to change. 2. Press the TIMER button to select either OFF → ON or OFF ← ON ...